ARMY UFGS-28 23 23 00 10-2011 CLOSED CIRCUIT TELEVISION SYSTEMS.pdf

1、*USACE / NAVFAC / AFCESA / NASA UFGS-28 23 23.00 10 (February 2011)-Preparing Activity: USACE SupersedingUFGS-28 23 23.00 10 (April 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated January 2011*SECTION TABLE OF CONTENTSDIVISION 28 - ELECTRONIC SAFETY AND SECURI

2、TYSECTION 28 23 23.00 10CLOSED CIRCUIT TELEVISION SYSTEMS02/11PART 1 GENERAL1.1 REFERENCES1.2 SYSTEM DESCRIPTION1.2.1 General1.2.2 System Overall Reliability Requirement1.2.3 Power Line Surge Protection1.2.4 Video and Sync Signal Transmission Line Surge Protection1.2.5 Control Line Surge Protection1

3、.2.6 Power Line Conditioners1.2.7 Video and Control Signal Data Transmission Media1.2.8 Electrical Requirements1.2.9 Uninterruptible Power Supply1.3 DELIVERY OF TECHNICAL DATA AND COMPUTER SOFTWARE1.3.1 Group I Technical Data Package1.3.1.1 System Drawings1.3.1.2 Manufacturers Data1.3.1.3 System Des

4、cription and Analyses1.3.1.4 Software Data1.3.1.5 Overall System Reliability Calculations1.3.1.6 Certifications1.3.1.7 Key Control Plan1.3.2 Group II Technical Data Package1.3.3 Group III Technical Data Package1.3.4 Group IV Technical Data Package1.3.4.1 Operation and Maintenance Manuals1.3.4.2 Trai

5、ning Documentation1.3.4.3 Data Entry1.3.4.4 Graphics1.3.5 Group V Technical Data Package1.3.5.1 Functional Design Manual1.3.5.2 Hardware Manual1.3.5.3 Software Manual1.3.5.4 Operators Manual1.4 SUBMITTALS1.5 QUALITY ASSURANCESECTION 28 23 23.00 10 Page 1Provided by IHSNot for ResaleNo reproduction o

6、r networking permitted without license from IHS-,-,-1.5.1 Predelivery Testing1.5.2 Test Procedures and Reports1.5.3 As-Built Drawings1.6 ENVIRONMENTAL REQUIREMENTS1.6.1 Field Equipment1.6.2 Security Center Equipment1.6.3 Hazardous Environment1.6.4 Existing Conditions1.7 MAINTENANCE AND SERVICE1.7.1

7、General Requirements1.7.2 Description of Work1.7.3 Personnel1.7.4 Schedule of Work1.7.5 Emergency Service1.7.6 Operation1.7.7 Records and Logs1.7.8 Work Requests1.7.9 System Modifications1.7.10 Software1.7.11 Maintenance ManualPART 2 PRODUCTS2.1 MATERIALS AND EQUIPMENT2.1.1 Fungus Treatment2.1.2 Sol

8、dering2.2 ENCLOSURES2.2.1 Interior2.2.2 Exposed-to-Weather2.2.3 Corrosion-Resistant2.2.4 Hazardous Environment Equipment2.3 TAMPER PROVISIONS2.3.1 Enclosure Covers2.3.2 Conduit-Enclosure Connections2.4 LOCKS AND KEY-LOCK OPERATED SWITCHES2.4.1 Locks2.4.2 Key-Lock-Operated Switches2.5 SYSTEM INTEGRAT

9、ION2.6 SOLID STATE CAMERAS2.6.1 High Resolution Monochrome Camera2.6.1.1 Solid State Image Array2.6.1.2 Sensitivity2.6.1.3 Camera Synchronization2.6.1.4 Connectors2.6.1.5 Automatic Circuits2.6.2 Low Light Monochrome Camera2.6.2.1 Solid State Imager2.6.2.2 Sensitivity2.6.2.3 Camera Synchronization2.6

10、.2.4 Connectors2.6.2.5 Automatic Circuits2.6.3 High Resolution Color Camera2.6.3.1 Solid State Image Array2.6.3.2 Sensitivity2.6.3.3 Camera Synchronization2.6.3.4 Connectors2.6.3.5 Automatic Circuits2.6.4 Dome Cameras2.6.4.1 Interior Dome Camera SystemSECTION 28 23 23.00 10 Page 2Provided by IHSNot

11、for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.6.4.2 Exterior Dome Camera System2.7 CAMERA LENSES2.8 CAMERA HOUSINGS AND MOUNTS2.8.1 Environmentally Sealed Camera Housing2.8.2 Indoor Camera Housing2.8.3 Interior Mount2.8.4 Low Profile Ceiling Mount2.8.5 Interior Dom

12、e Housing2.8.6 Exterior Dome Housing2.8.7 Exterior Wall Mount2.8.8 Pan/Tilt Mount2.8.9 Explosion Proof Housing2.9 VIDEO MONITOR2.9.1 Monochrome Video Monitor2.9.2 Color Video Monitor2.9.3 Picture Tube2.9.4 Configuration2.9.5 Controls2.9.6 Connectors for Video Monitor2.10 VIDEO SWITCHER2.10.1 Switche

13、r Software2.10.2 Switcher Matrix2.10.3 Switcher Modular Expansion2.10.3.1 Input Module2.10.3.2 Output Module2.10.4 Alarm Interface2.10.5 Switcher Response Time and Alarm Processing2.10.6 Control Keyboards2.10.7 Accessory Control Equipment2.10.8 Connectors for Video Switcher2.10.9 Video Annotation2.1

14、1 VIDEO MULTIPLEXER2.12 VIDEO CASSETTE RECORDER (VCR)2.12.1 Tape and Tape Transport2.12.2 Recording and Playback2.12.3 Connectors for VCR2.13 VIDEO SIGNAL EQUIPMENT2.13.1 Ground Loop Corrector2.13.2 Video Loss/Presence Detector2.13.3 Video Equalizing Amplifier2.13.4 Video Distribution Amplifier2.13.

15、5 Master Video Sync Generator2.13.6 Video Sync Distribution Amplifier2.14 CCTV CAMERA POLES2.14.1 Cantilever Camera Pole2.14.2 Straight Camera Pole2.14.3 Pan/Tilt Mounting Pole2.15 ACCESSORIES2.16 WIRE AND CABLE2.16.1 CCTV Equipment Video Signal Wiring2.16.2 Low Voltage Control Wiring2.16.3 Digital

16、Data Interconnection Wiring2.17 PREDELIVERY TESTING2.17.1 General2.17.2 Test SetupPART 3 EXECUTION3.1 INSTALLATIONSECTION 28 23 23.00 10 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.1.1 Existing Equipment3.1.2 Enclosure Penetrations3.1.3 C

17、old Galvanizing3.1.4 Interconnection of Console Video Equipment3.1.5 Cameras3.1.6 Monitors3.1.7 Switcher3.1.8 Video Recording Equipment3.1.9 Video Signal Equipment3.1.10 Camera Housings, Mounts, and Poles3.2 SYSTEM STARTUP3.3 SUPPLEMENTAL CONTRACTOR QUALITY CONTROL3.4 TRAINING3.4.1 General3.4.2 Oper

18、ators Training3.5 SITE TESTING3.5.1 General3.5.2 Contractors Field Testing3.5.3 Performance Verification Test3.5.4 Endurance Test- End of Section Table of Contents -SECTION 28 23 23.00 10 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE /

19、 NAVFAC / AFCESA / NASA UFGS-28 23 23.00 10 (February 2011)-Preparing Activity: USACE SupersedingUFGS-28 23 23.00 10 (April 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated January 2011*SECTION 28 23 23.00 10CLOSED CIRCUIT TELEVISION SYSTEMS02/11*NOTE: This gui

20、de specification covers the requirements for closed circuit television systems.Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements

21、not required in respective project, whether or not brackets are present.Comments, suggestions and recommended changes for this guide specification are welcome and should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL*NOTE: This section will be used in conjunction with Sections: 26 2

22、0 00 INTERIOR DISTRIBUTION SYSTEM; 33 71 01 OVERHEAD TRANSMISSION AND DISTRIBUTION; 33 70 02.00 10 ELECTRICAL DISTRIBUTION SYSTEM, UNDERGROUND; 27 15 19.00 10 WIRE LINE DATA TRANSMISSION SYSTEM; 27 21 10.00 10 FIBER OPTIC DATA TRANSMISSION SYSTEM; 28 20 01.00 10 ELECTRONIC SECURITY SYSTEM; and any o

23、ther guide specification sections required by the design.*1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designatio

24、n, date, and title.SECTION 28 23 23.00 10 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the

25、 Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process. *The publications li

26、sted below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.CONSUMER ELECTRONICS ASSOCIATION (CEA)CEA 170 (1957) Electrical Performance Standards - Monochrome Television Studio FacilitiesELECTRONIC COMPONENTS A

27、SSOCIATION (ECA)ECA EIA/ECA 310 (2005) Cabinets, Racks, Panels, and Associated EquipmentINSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)IEEE 142 (2007) Recommended Practice for Grounding of Industrial and Commercial Power Systems - IEEE Green BookIEEE C2 (2007; TIA 2007-1; TIA 2007-2; TIA 20

28、07-3; TIA 2007-4; TIA 2007-5; Errata 2006-1; Errata 2007-2; Errata 2009-3) National Electrical Safety CodeIEEE C62.41.1 (2002; R 2008) Guide on the Surges Environment in Low-Voltage (1000 V and Less) AC Power CircuitsIEEE C62.41.2 (2002) Recommended Practice on Characterization of Surges in Low-Volt

29、age (1000 V and Less) AC Power CircuitsNATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)NEMA 250 (2008) Enclosures for Electrical Equipment (1000 Volts Maximum)NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)NFPA 70 (2011) National Electrical CodeTELECOMMUNICATIONS INDUSTRY ASSOCIATION (TIA)TIA-232 (1

30、997f; R 2002) Interface Between Data SECTION 28 23 23.00 10 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Terminal Equipment and Data Circuit-Terminating Equipment Employing Serial Binary Data InterchangeU.S. NATIONAL ARCHIVES AND RECORDS ADM

31、INISTRATION (NARA)47 CFR 15 Radio Frequency DevicesUNDERWRITERS LABORATORIES (UL)UL 1492 (1996; Reprint Jun 2010) Audio-Video Products and Accessories1.2 SYSTEM DESCRIPTION1.2.1 General*NOTE: Show installation details on drawings. Add requirements for additional site specific conditions such as furn

32、iture/equipment layout within protected areas, and hazard location area, type of hazard, class, and group.*Configure the system as described and shown. All television equipment shall conform to CEA 170 specifications. Include in the system all connectors, adapters, and terminators necessary to inter

33、connect all equipment. Supply all cabling necessary to interconnect the closed circuit television (CCTV) equipment installed in the Security Center, and interconnect equipment installed at remote control/monitoring stations. If the CCTV system is installed for use with an Electronic Security System

34、(ESS) interface the CCTV system with the ESS.1.2.2 System Overall Reliability RequirementConfigure and install the system, including all components and appurtenances, to yield a mean time between failure (MTBF) of at least 10,000 hours, calculated based on the configuration specified in paragraph “S

35、ystem Overall Reliability Calculations.“1.2.3 Power Line Surge ProtectionProtect all equipment connected to AC power from surges. Equipment protection shall withstand surge test waveforms described in IEEE C62.41.1 and IEEE C62.41.2. Fuses shall not be used for surge protection.1.2.4 Video and Sync

36、Signal Transmission Line Surge ProtectionAll cable, except fiber optic cable, used for sync or video signal transmission shall include protective devices to safeguard the CCTV equipment against surges. The surge suppression device shall not attenuate or reduce the video or sync signal under normal c

37、onditions. The surge suppression device shall be capable of dissipating not less than 1500 watts for 1 millisecond, and the response time from zero volts to clamping shall not be greater than 5 nanoseconds. Fuses shall not be used for surge protection.SECTION 28 23 23.00 10 Page 7Provided by IHSNot

38、for ResaleNo reproduction or networking permitted without license from IHS-,-,-1.2.5 Control Line Surge ProtectionAll cables and conductors, except fiber optic cables, which serve as communication, control, or signal lines shall be protected against surges and shall have surge protection installed a

39、t each end. Protection shall be furnished at the equipment and additional triple electrode gas surge protectors rated for the application on each wireline circuit shall be installed within 1 m 3 feet of the building cable entrance. Fuses shall not be used for surge protection. Test the inputs and ou

40、tputs in both normal mode and common mode using the following waveforms:a. A 10 microsecond rise time by 1000 microsecond pulse width waveform with a peak voltage of 1500 volts and a peak current of 60 amperes.b. An 8 microsecond rise time by 20 microsecond pulse width waveform with a peak voltage o

41、f 1000 volts and a peak current of 500 amperes.1.2.6 Power Line Conditioners*NOTE: The power line conditioner for the CCTV system will be the same one as specified for the ESS. The designer will coordinate the requirements for the power line conditioner with the needs of the ESS. The designer will i

42、ndicate the line side voltage available to the Contractor for the CCTV equipment and ESS equipment. The designer will provide for a 208/120 Volt AC, 3 phase source at the security center.*Furnish a power line conditioner for the security console CCTV equipment. The power line conditioner used for th

43、e CCTV equipment shall be the same one as provided for Section 28 20 01.00 10 ELECTRONIC SECURITY SYSTEM and _. The power line conditioner shall be of the ferroresonant design, with no moving parts and no tap switching, while electrically isolating the secondary from the power line side. The power l

44、ine conditioner shall be sized for 125 percent of the actual connected kVA load. Characteristics of the power line conditioner shall be as follows:a. At 85 percent load, the output voltage shall not deviate by more than plus or minus 1 percent of nominal when the input voltage fluctuates between minus 20 percent to plus 10 percent of nominal.b. During load changes of zero to full load, the output voltage shall not deviate by more than plus or minus 3 percent of nominal. Full correction of load switching disturbances shall be accomplished within 5 cycles, and 95 percent correction sha