ARMY UFGS-28 31 76-2011 INTERIOR FIRE ALARM AND MASS NOTIFICATION SYSTEM.pdf

1、USACE / NAVFAC / AFCESA / NASA UFGS-28 31 76 (August 2011)-Preparing Activity: USACE SupersedingUFGS-28 31 76 (November 2008)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated October 2011*SECTION TABLE OF CONTENTSDIVISION 28 - ELECTRONIC SAFETY AND SECURITYSECTION 2

2、8 31 76INTERIOR FIRE ALARM AND MASS NOTIFICATION SYSTEM08/11PART 1 GENERAL1.1 RELATED SECTIONS1.2 REFERENCES1.3 DEFINITIONS1.4 SYSTEM DESCRIPTION1.4.1 Scope1.4.2 Technical Data and Computer Software1.4.3 Keys1.5 SUBMITTALS1.6 QUALITY ASSURANCE1.6.1 Qualifications1.6.1.1 Design Services1.6.1.2 Superv

3、isor1.6.1.3 Technician1.6.1.4 Installer1.6.1.5 Test Personnel1.6.1.6 Manufacturers Representative1.6.1.7 Manufacturer1.6.2 Regulatory Requirements1.6.2.1 Requirements for Fire Protection Service1.6.2.2 Fire Alarm/Mass Notification System1.6.2.3 Fire alarm Testing Services or Laboratories1.7 DELIVERY

4、 STORAGE, AND HANDLING1.8 OPERATION AND MAINTENANCE (O R 2008) Guide on the Surges Environment in Low-Voltage (1000 V and Less) AC Power CircuitsIEEE C62.41.2 (2002) Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power CircuitsSECTION 28 31 76 Page 7Provided

5、by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC)IEC 60268-16 (2003) Sound System Equipment - Part 16: Objective Rating Of Speech Intelligibility By Speech Transmission Index; Ed 3.0INTERNATIONAL ORGANIZATION FOR

6、STANDARDIZATION (ISO)ISO 7240-16 (2007) Fire Detection And Alarm Systems Part 16: Sound System Control And Indicating EquipmentISO 7240-19 (2007) Fire Detection and Alarm Systems Part 19: Design, Installation, Commissioning and Service of Sound Systems for Emergency PurposesNATIONAL FIRE PROTECTION

7、ASSOCIATION (NFPA)NFPA 170 (2009; Errata 2011) Standard for Fire Safety and Emergency SymbolsNFPA 70 (2011; TIA 11-1; Errata 2011) National Electrical CodeNFPA 72 (2010; TIA 10-4) National Fire Alarm and Signaling CodeNFPA 90A (2009; Errata 09-1) Standard for the Installation of Air Conditioning and

8、 Ventilating SystemsU.S. DEPARTMENT OF DEFENSE (DOD)UFC 3-601-02 (2010) Operations and Maintenance: Inspection, Testing, and Maintenance of Fire Protection SystemsUFC 4-021-01 (2008; Change 1 2010) Design and O Reprint Jun 2010) Standard for Speakers for Fire Alarm, Emergency, and Commercial and Pro

9、fessional UseUL 1638 (2001; Reprint Oct 2008) Visual Signaling Appliances - Private Mode Emergency and General Utility SignalingUL 1971 (2002; Reprint Oct 2008) Signaling Devices for the Hearing ImpairedSECTION 28 31 76 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted witho

10、ut license from IHS-,-,-UL 2017 (2008; Reprint May 2011) General-Purpose Signaling Devices and SystemsUL 268 (2009) Smoke Detectors for Fire Alarm SystemsUL 464 (2009; Reprint Jan 2011) Standard for Audible Signal AppliancesUL 521 (1999; Reprint May 2010) Heat Detectors for Fire Protective Signaling

11、 SystemsUL 864 (2003; Reprint Jan 20110) Standard for Control Units and Accessories for Fire Alarm SystemsUL Electrical Constructn (2009) Electrical Construction Equipment DirectoryUL Fire Prot Dir (2011) Fire Protection Equipment Directory1.3 DEFINITIONSWherever mentioned in this specification or o

12、n the drawings, the equipment, devices, and functions shall be defined as follows:a. Interface Device: An addressable device that interconnects hard wired systems or devices to an analog/addressable system.b. Remote Fire Alarm and Mass Notification Control Unit: A control panel, electronically remot

13、e from the fire alarm and mass notification control panel, that receives inputs from automatic and manual fire alarm devices; may supply power to detection devices and interface devices; may provide transfer of power to the notification appliances; may provide transfer of condition to relays or devi

14、ces connected to the control unit; and reports to and receives signals from the fire alarm control panel.c. Fire Alarm Control Unit and Mass Notification Autonomous Control Unit (FMCP): A master control panel having the features of a fire alarm and mass notification control unit and fire alarm and m

15、ass notification control units are interconnected. The panel has central processing, memory, input and output terminals, and LCD, LED Display units d. Local Operating Console (LOC): A unit designed to allow emergency responders and/or building occupants to operate the MNS including delivery or recor

16、ded and/or live messages, initiate strobe and textural visible appliance operation and other relayed functions.e. Terminal Cabinet: A steel cabinet with locking, hinge-mounted door that terminal strips are securely mounted.1.4 SYSTEM DESCRIPTION1.4.1 Scope*NOTE: Indicate the location of fire alarm a

17、nd mass SECTION 28 31 76 Page 9Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-notification system devices and riser locations on floor plans. Provide a fire alarm and mass notification system riser diagram indicating circuits and risers.*a. This wor

18、k includes completion of design and providing a new, complete, and modifying the existing fire alarm and mass notification system as described herein and on the contract drawings for the building name. Include in the system wiring, raceways, pull boxes, terminal cabinets, outlet and mounting boxes,

19、control equipment, alarm, and supervisory signal initiating devices, alarm notification appliances, supervising station fire alarm system transmitter, and other accessories and miscellaneous items required for a complete operating system even though each item is not specifically mentioned or describ

20、ed. Provide systems complete and ready for operation.b. Provide equipment, materials, installation, workmanship, inspection, and testing in strict accordance with the required and advisory provisions of NFPA 72, ISO 7240-16, IEC 60268-16, except as modified herein. The system layout on the drawings

21、show the intent of coverage and are shown in suggested locations. Submit plan view drawing showing device locations, terminal cabinet locations, junction boxes, other related equipment, conduit routing, wire counts, circuit identification in each conduit, and circuit layouts for all floors. Drawings

22、 shall comply with the requirements of NFPA 170. Final quantity, system layout, and coordination are the responsibility of the Contractor.A single fire alarm control panel is indicated with terminal cabinets at each floor, at each riser location.c. Where remote fire alarm control units are needed, t

23、hey shall be provided at a terminal cabinet location. Each remote fire alarm control unit shall be powered from a wiring riser specifically for that use or from a local emergency power panel located on the same floor as the remote fire alarm control unit. Where remote fire control units are provided

24、 equipment for notification appliances may be located in the remote fire alarm control units.1.4.2 Technical Data and Computer SoftwareTechnical data and computer software (meaning technical data that relates to computer software) that are specifically identified in this project, and may be defined

25、/required in other specifications, shall be delivered, strictly in accordance with the CONTRACT CLAUSES. Identify data delivered by reference to the particular specification paragraph against which it is furnished. Data to be submitted shall include complete system, equipment, and software descripti

26、ons. Descriptions shall show how the equipment will operate as a system to meet the performance requirements of this contract. The data package shall also include the following:a. Identification of programmable portions of system equipment and capabilities.b. Description of system revision and expan

27、sion capabilities and methods of implementation detailing both equipment and software requirements.c. Provision of operational software data on all modes of programmable portions of the fire alarm and detection system.SECTION 28 31 76 Page 10Provided by IHSNot for ResaleNo reproduction or networking

28、 permitted without license from IHS-,-,-d. Description of Fire Alarm and Mass Notification Control Panel equipment operation.e. Description of auxiliary and remote equipment operations.f. Library of application software.g. Operation and maintenance manuals.1.4.3 KeysKeys and locks for equipment shal

29、l be identical. Provide not less than six keys of each type required. Master all keys and locks to a single key as required by the Installation Fire Department . Keys shall be CAT 60_.LOC is not permitted to be locked or lockable.1.5 SUBMITTALS*NOTE: Review submittal description (SD) definitions in

30、Section 01 33 00 SUBMITTAL PROCEDURES and edit the following list to reflect only the submittals required for the project. Submittals should be kept to the minimum required for adequate quality control.A “G“ following a submittal item indicates that the submittal requires Government approval. Some s

31、ubmittals are already marked with a “G“. Only delete an existing “G“ if the submittal item is not complex and can be reviewed through the Contractors Quality Control system. Only add a “G“ if the submittal is sufficiently important or complex in context of the project.For submittals requiring Govern

32、ment approval on Army and Air Force projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resident Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ for Distri

33、ct Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy, Air Force, and NASA projects.Choose the first bracketed item for Navy and NASA projects

34、 or choose the second bracketed item for Army and Air Force projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor Quality Control approval.information only. When used, a designation following the “G“ designation i

35、dentifies the office that will review the submittal for the Government. Submit the following in accordance with Section 01 33 00 SECTION 28 31 76 Page 11Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SUBMITTAL PROCEDURES:SD-02 Shop DrawingsNameplate

36、s; G; G, _Instructions; G; G, _Wiring Diagrams; G; G, _System Layout; G; G, _System Operation; G; G, _Notification Appliances; G; G, _Amplifiers; G; G, _SD-03 Product DataTechnical Data And Computer Software; G; G, _Fire Alarm Control Unit and Mass Notification Control Unit (FMCP); GLCD, LED Display

37、 Unit (VDU); G; G, _Terminal cabinets; G; G, _Manual stations; G; G, _Transmitters (including housing); G; G, _Batteries; G; G, _Battery chargers; G; G, _Smoke sensors; G; G, _Heat detectors; G; G, _Notification appliances; G; G, _Addressable interface devices; G; G, _Amplifiers; G; G, _Tone generat

38、ors; G; G, _Digitalized voice generators; G; G, _Remote Fire Alarm/Mass Notification Control Units; G; G, _Radio transmitter and interface panels; G; G, _Digital alarm communicator transmitter (DACT); G; G, _Local Operating Console (LOC); G; G, _SD-05 Design DataBattery power; G; G, _Battery charger

39、s; G; G, _SD-06 Test ReportsField Quality ControlTesting Procedures; G; G, _Smoke sensor testing procedures; G; G, _SD-07 CertificatesInstallerFormal Inspection and TestsFinal TestingSD-09 Manufacturers Field ReportsSystem Operation; G; G, _Fire Alarm/Mass Notification SystemSD-10 Operation and Main

40、tenance DataSECTION 28 31 76 Page 12Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Operation and Maintenance (O G; G, _Instruction of Government EmployeesSD-11 Closeout SubmittalsAs-Built Drawings1.6 QUALITY ASSURANCEEquipment and devices shall be c

41、ompatible and operable with existing station fire alarm system and shall not impair reliability or operational functions of existing supervising station fire alarm system. The proprietary type Supervising Station (PSS) is located in building _ _The supervising equipment is existing and consists of t

42、he following brands and models: supervising station control panel _ _, signal reporting components _, annunciator _ _.a. In NFPA publications referred to herein, consider advisory provisions to be mandatory, as though the word “shall“ had been substituted for “should“ wherever it appears; interpret

43、reference to “authority having jurisdiction“ to mean the Naval Facilities Engineering Command, _, Fire Protection Engineer Air Force Civil Engineer Support Agency, Fire Protection Engineering Subject Matter ExpertContracting Offices Designated Representative (COR).b. The recommended practices stated

44、 in the manufacturers literature or documentation shall be considered as mandatory requirements.c. Devices and equipment for fire alarm service shall be listed by UL Fire Prot Dir or approved by FM APP GUIDE.1.6.1 Qualifications1.6.1.1 Design Services*NOTE: For Navy utilize only a registered fire pr

45、otection engineer.*Installations requiring completion of installation drawings and specification or modifications of fire detection, fire alarm, mass notification system, fire suppression systems or mass notification systems shall require the services and review of a qualified engineer. For the purposes of meeting this requirement, a qualified engineer is defined as an individual meeting one of the following conditions:a. A registered professional engineer having a Bachelor of Science or Masters of Science Degree in Fire Protection Engine