1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-20204-0 ARP 062-9-2:2008Edition 1IEC/TS 62257-9-2:2006Edition 1STANDARDS SOUTH AFRICA Recommended practice Recommendations for small renew
4、able energy and hybrid systems for rural electrification Part 9-2: Microgrids This recommended practice is the identical implementation of IEC/TS 62257-9-2:2006 and is adopted with the permission of the International Electrotechnical Commission. WARNING Can only be used in conjunction with the ARP 0
5、62 series. This document does not have the status of a South African National Standard. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa ARP 062-9-2:2
6、008 Edition 1 IEC/TS 62257-9-2:2006 Edition 1 Table of changes Change No. Date Scope National foreword This recommended practice is a technical agreement developed in accordance with SANS 1-1, and agreed to by StanSA TC 69, Power electronics and alternative energy conversion. This document was publi
7、shed in February 2008. TECHNICAL SPECIFICATION IECTS 62257-9-2First edition2006-10Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-2: Microgrids PRICE CODE IEC 2006 Copyright - all rights reserved No part of this publication may be reproduced or utilized
8、 in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00
9、 E-mail: inmailiec.ch Web: www.iec.ch XA For price, see current catalogueCommission Electrotechnique InternationaleInternational Electrotechnical Commission ARP 062-9-2:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 2 TS 62257-9-2 IEC:2
10、006(E) CONTENTS FOREWORD.4 INTRODUCTION.6 1 Scope.7 2 Normative reference .7 3 Terms and definitions .7 4 General 9 4.1 Limits of a microgrid 9 4.2 Voltage drops9 4.3 Composition of a microgrid9 5 Protection against electric shocks.11 6 Protection against overcurrents 11 7 Selection and erection of
11、equipment.11 7.1 Equipment installation .11 7.2 Operational conditions and external influences11 7.3 Characteristics of lines 13 7.4 Cables.14 7.5 Poles.14 7.6 Cable anchorage .17 7.7 Connections and accessories 17 7.8 Where poles are used for other purposes 19 7.9 Isolation and switching 19 7.10 Ea
12、rthing arrangement, protective conductors and protective bonding conductors 20 8 Verification and acceptance22 8.1 General .22 8.2 Supervision of works .22 8.3 Verification before commissioning (on site acceptance).22 8.4 Operation tests23 Annex A (informative) Characteristics of cables 24 Annex B (
13、informative) Maximum circuit length.26 Figure 1 Microgrid limits.9 Figure 2 Microgrid consisting of a single-phase feeder.10 Figure 3 Three phase system output, single phase distribution or three phase service provided where needed.10 Figure 4 Three phase system output, single phase distribution 11
14、Figure 5 Diagram showing installation of twinned wooden poles forming an angle .16 Figure 6 Examples of different pole arrangements .16 Figure 7 Example of an overhead line 16 Figure 8 Connection mode diagram19 Figure 9 Microgrid earthing scheme .21 ARP 062-9-2:2008This s tandard may only be used an
15、d printed by approved subscription and freemailing clients of the SABS .TS 62257-9-2 IEC:2006(E) 3 Table 1 Maximum values of voltage drops9 Table 2 Fuse ratings for protection from short-circuiting in 230 V a.c. microgrids (overhead lines)20 Table 3 Fuse ratings for protection from short-circuiting
16、in 120 V a.c. microgrids (overhead lines)20 Table 4 Circuit breaker ratings for protection from short-circuiting in microgrids (overhead lines)20 Table 5 Characteristics of earthing components.22 Table A.1 Example of characteristics of grid conductors for overhead lines (insulated twisted conductors
17、 without carrier neutral) 24 ARP 062-9-2:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 4 TS 62257-9-2 IEC:2006(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECT
18、RIFICATION Part 9-2: Microgrids FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions c
19、oncerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”).
20、Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborate
21、s closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the
22、relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that
23、the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the max
24、imum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsib
25、le for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical c
26、ommittees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Public
27、ations. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of p
28、atent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. In exceptional circumstances, a technical committee may propose the publication of a technical specification when the requir
29、ed support cannot be obtained for the publication of an International Standard, despite repeated efforts, or The subject is still under technical development or where, for any other reason, there is the future but no immediate possibility of an agreement on an International Standard. Technical speci
30、fications are subject to review within three years of publication to decide whether they can be transformed into International Standards. IEC 62257-9-2, which is a technical specification, has been prepared by IEC technical committee 82: Solar photovoltaic energy systems. This part of IEC 62257-9 is
31、 based on IEC/PAS 62111 (1999); it cancels and replaces the relevant parts of IEC/PAS 62111. ARP 062-9-2:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .TS 62257-9-2 IEC:2006(E) 5 This part of IEC 62257-9 is to be used in conjunction with
32、 the IEC 62257 series. The text of this technical specification is based on the following documents: Enquiry draft Report on voting 82/412/DTS 82/443/RVC Full information on the voting for the approval of this technical specification can be found in the report on voting indicated in the above table.
33、 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 62257 series, under the general title Recommendations for small renewable energy and hybrid systems for rural electrification, can be found on the IEC website. The committee has decid
34、ed that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be transformed into an international standard; reconfirmed;
35、 withdrawn; replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. ARP 062-9-2:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 6 TS 62257-9-2 IEC:2006(E) INTRODUCTION The IEC 622
36、57 series intends to provide to different players involved in rural electrification projects (such as project implementers, project contractors, project supervisors, installers, etc.) documents for the setting up of renewable energy and hybrid systems with a.c. nominal voltage below 500 V, d.c. nomi
37、nal voltage below 750 V and nominal power below 100 kVA. These documents are recommendations: to choose the right system for the right place, to design the system, to operate and maintain the system. These documents are focused only on rural electrification concentrating on but not specific to devel
38、oping countries. They should not be considered as all inclusive to rural electrification. The documents try to promote the use of renewable energies in rural electrification; they do not deal with clean mechanisms developments at this time (CO2emission, carbon credit, etc.). Further developments in
39、this field could be introduced in future steps. This consistent set of documents is best considered as a whole with different parts corresponding to items for safety, sustainability of systems and at the lowest life cycle cost as possible. One of the main objectives is to provide the minimum suffici
40、ent requirements, relevant to the field of application that is: small renewable energy and hybrid off-grid systems. Decentralized Rural Electrification Systems (DRES) are designed to supply electric power for sites which are not connected to a large interconnected system, or a national grid, in orde
41、r to meet basic needs. The majority of these sites are: isolated dwellings, village houses, community services (public lighting, pumping, health centres, places of worship or cultural activities, administrative buildings, etc.), economic activities (workshops, microindustry, etc.). The DRE systems f
42、all into three categories: process electrification systems (for example for pumping), individual electrification systems (IES) for single users, collective electrification systems (CES) for multiple users. Process or individual electrification systems exclusively consist of two subsystems: an electr
43、ic energy generation subsystem, the users electrical installation. Collective electrification systems, however, consist of three subsystems: an electric energy generation subsystem, a distribution subsystem, also called microgrid, users electrical installations including interface equipment between
44、the installations and the microgrid. ARP 062-9-2:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .TS 62257-9-2 IEC:2006(E) 7 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION Part 9-2: Microgrids 1 Sco
45、pe The purpose this part of IEC 62257-9 is to specify the general requirements for the design and the implementation of microgrids used in decentralized rural electrification to ensure the safety of persons and property and their satisfactory operation according to the scheduled use. This part of IE
46、C 62257-9 applies to microgrids for decentralized rural electrification purposes. The microgrids covered by this part of IEC 62257-9 are low voltage a.c., three-phase or single-phase, with rated capacity less than or equal to 100 kVA. They are powered by a single micropowerplant and do not include v
47、oltage transformation. The low-voltage levels covered under this part of IEC 62257-9 are the 230 V 1-/400 V 3- systems, 220 V 1-/380 V 3-, the 120 V 1-/208 V 3-, 60 Hz or 50 Hz systems. This part of IEC 62257-9 specifies microgrids made of overhead lines because of technical and economical reasons i
48、n the context of decentralized rural electrification. In particular cases, underground cables can be used. The requirements cover microgrids with radial architecture. 2 Normative reference The following referenced documents are indispensable for the application of this document. For dated references
49、, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62257 (all parts), Recommendations for small renewable energy and hybrid systems for rural electrification IEC 60439 (all parts), Low-voltage switchgear and controlgear assemblies 3 Terms and definitions For the purposes of this document, the following terms and definitions a
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1