ASHRAE 52 2 ADD E-2016 Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size.pdf

1、ANSI/ASHRAE Addendum e toANSI/ASHRAE Standard 52.2-2012Method of TestingGeneral VentilationAir-Cleaning Devices forRemoval Efficiency byParticle SizeApproved by ASHRAE on February 29, 2016, and by the by the American National Standards Institute on March 1, 2016.These addenda were approved by a Stan

2、ding Standard Project Committee (SSPC) for which the Standards Committee has estab-lished a documented program for regular publication of addenda or revisions, including procedures for timely, documented, con-sensus action on requests for change to any part of the standard. The change submittal form

3、, instructions, and deadlines may beobtained in electronic form from the ASHRAE website (www.ashrae.org) or in paper form from the Manager of Standards. The latest edition of an ASHRAE Standard may be purchased on the ASHRAE website (www.ashrae.org) or from ASHRAE Cus-tomer Service, 1791 Tullie Circ

4、le, NE, Atlanta, GA 30329-2305. E-mail: ordersashrae.org. Fax: 678-539-2129. Telephone: 404-636-8400 (worldwide), or toll free 1-800-527-4723 (for orders in US and Canada). For reprint permission, go towww.ashrae.org/permissions. 2016 ASHRAE ISSN 1041-2336SPECIAL NOTEThis American National Standard

5、(ANS) is a national voluntary consensus standard developed under the auspices of ASHRAE. Consensus is definedby the American National Standards Institute (ANSI), of which ASHRAE is a member and which has approved this standard as an ANS, as “substantialagreement reached by directly and materially af

6、fected interest categories. This signifies the concurrence of more than a simple majority, but not necessarilyunanimity. Consensus requires that all views and objections be considered, and that an effort be made toward their resolution.” Compliance with thisstandard is voluntary until and unless a l

7、egal jurisdiction makes compliance mandatory through legislation.ASHRAE obtains consensus through participation of its national and international members, associated societies, and public review.ASHRAE Standards are prepared by a Project Committee appointed specifically for the purpose of writing th

8、e Standard. The Project CommitteeChair and Vice-Chair must be members of ASHRAE; while other committee members may or may not be ASHRAE members, all must be technicallyqualified in the subject area of the Standard. Every effort is made to balance the concerned interests on all Project Committees. Th

9、e Manager of Standards of ASHRAE should be contacted for:a. interpretation of the contents of this Standard,b. participation in the next review of the Standard,c. offering constructive criticism for improving the Standard, ord. permission to reprint portions of the Standard.DISCLAIMERASHRAE uses its

10、 best efforts to promulgate Standards and Guidelines for the benefit of the public in light of available information and acceptedindustry practices. However, ASHRAE does not guarantee, certify, or assure the safety or performance of any products, components, or systems tested,installed, or operated

11、in accordance with ASHRAEs Standards or Guidelines or that any tests conducted under its Standards or Guidelines will benonhazardous or free from risk.ASHRAE INDUSTRIAL ADVERTISING POLICY ON STANDARDSASHRAE Standards and Guidelines are established to assist industry and the public by offering a unif

12、orm method of testing for rating purposes, bysuggesting safe practices in designing and installing equipment, by providing proper definitions of this equipment, and by providing other information thatmay serve to guide the industry. The creation of ASHRAE Standards and Guidelines is determined by th

13、e need for them, and conformance to them iscompletely voluntary.In referring to this Standard or Guideline and in marking of equipment and in advertising, no claim shall be made, either stated or implied, that theproduct has been approved by ASHRAE.ASHRAE STANDARDS COMMITTEE 20152016Douglass T. Rein

14、dl, Chair Steven J. Emmerich Heather L. PlattRita M. Harrold, Vice-Chair Julie M. Ferguson David RobinJames D. Aswegan Walter T. Grondzik Peter SimmondsNiels Bidstrup Roger L. Hedrick Dennis A. StankeDonald M. Brundage Srinivas Katipamula Wayne H. Stoppelmoor, Jr.John A. Clark Rick A. Larson Jack H.

15、 ZarourWaller S. Clements Lawrence C. Markel Julia A. Keen, BOD ExOJohn F. Dunlap Arsen K. Melikov James K. Vallort, COJames W. Earley, Jr. Mark P. ModeraKeith I. Emerson Cyrus H. NasseriStephanie C. Reiniche, Senior Manager of StandardsASHRAE is a registered trademark of the American Society of Hea

16、ting, Refrigerating and Air-Conditioning Engineers, Inc.ANSI is a registered trademark of the American National Standards Institute.ASHRAE Standing Standard Project Committee 52.2Cognizant TC: 2.4, Particulate Air Contaminants and Particulate Removal EquipmentSPLS Liaison: Rita M. HarroldMichael D.

17、Corbat*, Chair Zied Driss* Bruce N. McDonald*Kathleen Owen*, Vice-Chair Chris Fischer* Stephen W. Nicholas*Todd A. McGrath*, Secretary Thomas A. Justice* John S. Robertson*Richard K. Chesson, Jr.* Carolyn M. L Kerr* Christine Q. Sun*Kyung-Ju Choi* David Matier* Paolo M. Tronville*David. B. Christoph

18、er* Phil Maybee* Alan C. Veeck* Denotes members of voting status when the document was approved for publication ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digital form is not permitted without ASHRAEs prior written permis

19、sion.ANSI/ASHRAE Addendum e to ANSI/ASHRAE Standard 52.2-2012 1(This foreword is not part of this standard. It is merelyinformative and does not contain requirements necessaryfor conformance to the standard. It has not been pro-cessed according to the ANSI requirements for a standardand may contain

20、material that has not been subject topublic review or a consensus process. Unresolved objec-tors on informative material are not offered the right toappeal at ASHRAE or ANSI.)FOREWORDThis addendum addresses concerns regarding partial, short-cut, or initial testing only that can misstate the MERV per

21、for-mance classification and discredit the validity of the minimumreporting requirements of the standard.Note: In this addendum, changes to the current standardare indicated in the text by underlining (for additions) andstrikethrough (for deletions) unless the instructions specifi-cally mention some

22、 other means of indicating the changes. 12.5 The classification term “MERV” shall only be used inthe performance report and product labeling if the entire pro-cedure prescribed by the standard has been included.Addendum e to Standard 52.2-2012Insert new Section 12.5 as shown. ASHRAE (www.ashrae.org)

23、. For personal use only. Additional reproduction, distribution, or transmission in either print or digital form is not permitted without ASHRAEs prior written permission. ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digital

24、 form is not permitted without ASHRAEs prior written permission.POLICY STATEMENT DEFINING ASHRAES CONCERNFOR THE ENVIRONMENTAL IMPACT OF ITS ACTIVITIESASHRAE is concerned with the impact of its members activities on both the indoor and outdoor environment. ASHRAEs memberswill strive to minimize any

25、possible deleterious effect on the indoor and outdoor environment of the systems and components in theirresponsibility while maximizing the beneficial effects these systems provide, consistent with accepted standards and the practical state ofthe art.ASHRAEs short-range goal is to ensure that the sy

26、stems and components within its scope do not impact the indoor and outdoorenvironment to a greater extent than specified by the standards and guidelines as established by itself and other responsible bodies.As an ongoing goal, ASHRAE will, through its Standards Committee and extensive technical comm

27、ittee structure, continue togenerate up-to-date standards and guidelines where appropriate and adopt, recommend, and promote those new and revised standardsdeveloped by other responsible organizations.Through its Handbook, appropriate chapters will contain up-to-date standards and design considerati

28、ons as the material issystematically revised.ASHRAE will take the lead with respect to dissemination of environmental information of its primary interest and will seek out anddisseminate information from other responsible organizations that is pertinent, as guides to updating standards and guideline

29、s.The effects of the design and selection of equipment and systems will be considered within the scope of the systems intended useand expected misuse. The disposal of hazardous materials, if any, will also be considered.ASHRAEs primary concern for environmental impact will be at the site where equip

30、ment within ASHRAEs scope operates.However, energy source selection and the possible environmental impact due to the energy source and energy transportation will beconsidered where possible. Recommendations concerning energy source selection should be made by its members. ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digital form is not permitted without ASHRAEs prior written permission.ASHRAE 1791 Tullie Circle NE Atlanta, GA 30329 www.ashrae.org 3/16