ASD-STAN PREN 2997-005-2015 Aerospace series Connectors electrical circular coupled by threaded ring fire-resistant or non fire-resistant operating temperatures - 65 to 175 continu.pdf

1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM prEN 2997-005 Edition P 4 March 2015 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Rue Montoyer 10 - 1000 Brussels - Tel. 32 2 775 8126 - Fax. 32 2 775 8131 - www.asd-stan.org ICS: Supersedes edition P 3 of Ma

2、y 2011 and will supersede EN 2997-005:2012 Descriptors: ENGLISH VERSION Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 005: Hermetic square flange re

3、ceptacle Product standard Srie arospatiale Connecteurs lectriques circulaires accouplement par bague filete, rsistant au feu ou non, tempratures dutilisation 65 C 175 C continu, 200 C continu, 260 C en pointe Partie 005 : Embase hermtique fixation par collerette carre Norme de produit Luft- und Raum

4、fahrt Elektrische Rundsteckverbinder mit Schraubkupplung, feuerbestndig oder nicht feuerbestndig, Betriebstemperaturen 65 C bis 175 C konstant, 200 C konstant, 260 C Spitze Teil 005: Hermetischer fester Steckverbinder mit quadratischem Montageflansch Produktnorm This “Aerospace Series“ Prestandard h

5、as been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. S

6、ubsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be sub

7、mitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing

8、 any national standards conflicting with the EN. Edition approved for publication 1st March 2015 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2015 by ASD-STAN prEN 2997-005:2015 (E) 2 Contents Page Foreword 2 1 Scope 3 2 Normative re

9、ferences 3 3 Terms and definitions .3 4 Required characteristics .4 5 Designation 7 6 Marking .8 7 Technical specification .8 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of

10、ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. prEN 2997-005:2015 (E) 3 1 Scope This standard specifies the characteristics of hermetic square flange mounted receptacles in the family of circular electrical connectors coupled by threaded ri

11、ng. It applies to the class defined in Table 3. For plugs and protective covers, see EN 2997-008 and EN 2997-009 respectively. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated referen

12、ces, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2997-001, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C t

13、o 175 C continuous, 200 C continuous, 260 C peak Part 001: Technical specification EN 2997-002, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 002: S

14、pecification of performance and contact arrangements EN 2997-008, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 008: Plug Product standard EN 2997-0

15、09, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 009: Protective cover for receptacle Product standard 3 Terms and definitions For the purposes of

16、this document, the terms and definitions given in EN 2997-001 apply. prEN 2997-005:2015 (E) 4 4 Required characteristics 4.1 Dimensions and mass See Figure 1 and Table 1. Dimensions and tolerances are in millimetres; they apply after surface treatment. Key 1 4 holes 103303,shell sizes 08 to 22 4 hol

17、es 683913,shell sizes 24 to 28 2 Thread 3 See EN 2997-001. Figure 1 prEN 2997-005:2015 (E) 5 Table 1 Housing size C G H K N S Mass g Size contact 20 Size contacts 16 and 12 max. min. max. max. 08 12,70 12,55 15,09 4,93 3,40 5,69 4,17 20,75 20,49 10,16 14,27 18 10 14,27 14,12 18,26 23,93 23,67 10,44

18、17,67 24 12 19,05 18,90 20,62 26,32 26,06 14,76 22,22 31 14 20,62 20,47 23,01 28,71 28,45 16,51 23,77 40 16 23,80 23,65 24,61 31,88 31,62 19,74 26,97 49 18 26,97 26,82 26,97 34,24 33,98 21,95 30,15 54 20 30,15 30,00 29,36 36,63 36,37 26,26 33,32 62 22 33,32 33,17 31,75 39,80 39,54 28,78 36,49 77 24

19、36,50 36,35 34,92 43,39 43,13 32,61 39,67 88 28 42,82 42,67 39,67 50,93 50,67 38,81 46,02 130 4.2 Panel cut-out and mounting of connectors See Figure 2 and Table 2 for panel cut-out and Figure 3 for mounting of connectors. Dimensions and tolerances are in millimetres. prEN 2997-005:2015 (E) 6 Connec

20、tor one Connector two Key 1 4 holes C X min. value is calculated as follows: D/2 connector one D/2 connector two. (See Table 2 for value D) Figure 2 Table 2 Housing size A min. B C D min. 08 15,80 15,09 3,30 3,10 31,70 10 18,70 18,26 34,90 12 23,40 20,62 39,60 14 24,90 23,01 41,25 16 28,30 24,61 44,

21、45 18 31,10 26,97 47,35 20 34,50 29,36 51,90 22 37,50 31,75 54,10 24 40,60 34,92 3,91 3,68 57,25 28 48,00 39,67 65,25 prEN 2997-005:2015 (E) 7 Front mounting Rear mounting Key 1 panel Figure 3 4.3 Material, surface treatment See Table 3. 4.4 Main general characteristics See EN 2997-002. 4.5 Possible

22、 combinations of plugs and receptacles See EN 2997-002. 5 Designation EXAMPLE Description block ELECTRICAL CONNECTOR, RECEPTACLE Identity block EN2997Y02457M6 Number of the basic standard Class (see Table 3) Hermetic square-flange mounted receptacle (see EN 2997-002) Housing size and contact arrange

23、ment (see EN 2997-002) Type of contact: M Solder cup male X Eyelet male Polarization (see EN 2997-002) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. prEN 2997-005:2015 (E) 8 Table 3 Class and model connector Class Model description Y Hermetic

24、 receptacle with housing (shell) in passivated stainless steel, 500 h resistance to salt mist, solder contacts, maximum operating temperature 200 C continuous YE Hermetic receptacle with housing (shell) in passivated stainless steel, 500 h resistance to salt mist, solder contacts, maximum operating temperature 260 C peak 6 Marking Unless there are other specific contractual requirements, the marking shall include: the identity block as defined in Clause 5; the date of manufacture (year, week); the manufacturers name or trade mark. 7 Technical specification See EN 2997-001.