ASD-STAN PREN 3645-005-2017 Aerospace series Connectors electrical circular scoop-proof triple start threaded coupling operating temperature 175 or 200 continuous - Part 005 Recept.pdf

1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM ASD-STAN prEN 3645-005 Edition P 2 November 2017 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Rue Montoyer 10 - 1000 Brussels - Tel. 32 2 775 8126 - Fax. 32 2 775 8131 - www.asd-stan.org ICS: Supersedes editi

2、on P 1 of November 2005 and will supersede EN 3645-013:2006 Descriptors: ENGLISH VERSION Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 005: Receptacle, hermetic, round flange, solder mounting Produ

3、ct standard Luft- und Raumfahrt Elektrische Rundsteckverbinder, kontaktgeschtzt, drei-gngige Gewinde Schnellkupplung, Dauerbetriebstemperaturen 175 C oder 200 C Teil 005: Fester Steckverbinder, hermetisch, mit rundem Schweiflansch Produktnorm Srie arospatiale Connecteurs lectriques circulaires conta

4、cts protgs, accouplement par filetage pas rapide trois filets, tempratures dutilisation 175 C ou 200 C continu Partie 005 : Embase hermtique collerette ronde fixation par brasage Norme de produit This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpac

5、e and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical con

6、tent shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, the ASD-STAN prEN will be submitted as a draft European Standard (prEN) to CEN (E

7、uropean Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. ASD

8、-STAN Technical Committee approves that: “This document is published by ASD-STAN for the needs of the European Aerospace Industry. The use of this standard is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the

9、 sole responsibility of the user.” ASD-STAN reviews each standard and technical report at least every five years at which time it may be revised, reaffirmed, stabilized or cancelled. ASD-STAN invites you to send your written comments or any suggestions that may arise. All rights reserved. No parts o

10、f this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of ASD-STAN. Order details: E-mail: salesasd-stan.org Web address: http:/www.asd-stan.org/ E

11、dition approved for publication 1st November 2017 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2017 ASD-STAN prEN 3645-005:2017 (E) 2 Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Terms and definitions . 4 4 Required

12、characteristics 4 5 Designation . 6 6 Marking . 7 7 Technical specification . 7 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process

13、Manual, this standard has received approval for Publication. prEN 3645-005:2017 (E) 3 1 Scope This standard specifies the characteristics of round flange hermetic receptacles, mounted by soldering, in the family of circular electrical connectors with triple start threaded coupling. It applies to mod

14、els in Table 3. The contacts are unremovable and soldered termination. For plugs and protective covers, see EN 3645-008, EN 3645-011, EN 3645-012 and EN 3645-006 respectively. These connectors are derived from and interchangeable with model Y in specification MIL-DTL-38999/25. 2 Normative references

15、 The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 364

16、5-001, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 001: Technical specification. EN 3645-002, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, opera

17、ting temperature 175 C or 200 C continuous Part 002: Specification of performance and contact arrangements. EN 3645-006, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 006: Protective cover for rece

18、ptacle Product standard. EN 3645-008, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 008: Non release plug with grounding ring Product standard. EN 3645-011, Aerospace series Connectors, electrical,

19、 circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 011: Lanyard release plug with grounding fingers Type 1 Product standard. EN 3645-012, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operatin

20、g temperature 175 C or 200 C continuous Part 012: Lanyard release plug with grounding fingers Type 2 Product standard. MIL-DTL-38999/25, Connector, electrical, circular, threaded, receptacle, solder mounting, hermetic, hermetic solder contacts, series III, metric. 1) 1) Published by: Department of D

21、efense (DOD), The Pentagon, Washington D.C. 20301 USA. prEN 3645-005:2017 (E) 4 3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 3645-001 apply. 4 Required characteristics 4.1 Dimensions and mass See Figure 1 and Table 1. Dimensions and tolerances are

22、in millimetres. Key 1 Red strip Figure 1 Round flange receptacle prEN 3645-005:2017 (E) 5 Table 1 Round flange receptacle Dimensions Shell size F N S Z Stainless steel mass g max. max. max. max. max. 09 17,10 5,10 19,40 23,80 15 11 19,90 21,80 20 13 23,10 24,90 25 15 26,20 28,10 31 17 29,40 31,30 38

23、 19 31,80 33,60 44 21 35,00 36,80 51 23 38,20 5,90 40,00 24,60 60 25 41,30 43,20 71 4.2 Materials and surface treatment See Table 3. 4.3 Recommended panel cut-out See Figure 2 and Table 2. Dimensions and tolerances are in millimetres. Figure 2 Panel cut-out prEN 3645-005:2017 (E) 6 Table 2 Panel cut

24、-out Dimensions Shell size A 0,25 0 09 17,20 11 20,00 13 23,20 15 26,30 17 29,50 19 31,90 21 35,10 23 38,30 25 41,40 4.4 Electrical, mechanical and climatic characteristics See EN 3645-002. 5 Designation EXAMPLE Description block ELECTRICAL CONNECTOR Identity block EN3645-Y1GN35MA Number of the basi

25、c standard Model (see Table 3) Shell code for hermetic, round flange receptacle, attached by soldering Shell size code (see Table 4) N: no earthed contacts Contact arrangement (see EN 3645-002) except those containing coaxial, triaxial, or quadrax contacts or size 10 contacts Contact code M: male wi

26、th solder cup X: male with eyelet Polarization: N, A, B, C, D, E NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. prEN 3645-005:2017 (E) 7 Table 3 Model coding Model Description Y Hermetic receptacle, passivated stainless steel Solder contacts Maximum operating temperature 200 C continuous Table 4 Shell size code Shell size Code 09 A 11 B 13 C 15 D 17 E 19 F 21 G 23 H 25 J 6 Marking According to EN 3645-001. 7 Technical specification According to EN 3645-001.