ASD-STAN PREN 3645-010-2017 Aerospace series Connectors electrical circular scoop-proof triple start threaded coupling operating temperature 175 or 200 continuous Part 010 Receptac.pdf

1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM ASD-STAN prEN 3645-010 Edition P 2 September 2017 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Rue Montoyer 10 - 1000 Brussels - Tel. 32 2 775 8126 - Fax. 32 2 775 8131 - www.asd-stan.org ICS: Supersedes edit

2、ion P 1 of November 2005 and will supersede EN 3645-010:2006 Descriptors: ENGLISH VERSION Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 010: Receptacle, hermetic, round flange, jam nut mounting Pro

3、duct standard Luft- und Raumfahrt Elektrische Rundsteckverbinder, kontaktgeschtzt, drei-gngige Gewinde Schnellkupplung, Dauerbetriebstemperaturen 175 C oder 200 C Teil 010: Fester Steckverbinder, hermetisch, mit Mutternbefestigung Produktnorm Srie arospatiale Connecteurs lectriques circulaires conta

4、cts protgs, accouplement par filetage pas rapide trois filets, tempratures dutilisation 175 C ou 200 C continu Partie 010 : Embase collerette ronde, hermtique fixation par crou Norme de produit This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace

5、and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical conte

6、nt shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, the ASD-STAN prEN will be submitted as a draft European Standard (prEN) to CEN (Eur

7、opean Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. ASD-S

8、TAN Technical Committee approves that: “This document is published by ASD-STAN for the needs of the European Aerospace Industry. The use of this standard is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the s

9、ole responsibility of the user.” ASD-STAN reviews each standard and technical report at least every five years at which time it may be revised, reaffirmed, stabilized or cancelled. ASD-STAN invites you to send your written comments or any suggestions that may arise. All rights reserved. No parts of

10、this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of ASD-STAN. Order details: E-mail: salesasd-stan.org Web address: http:/www.asd-stan.org/ Edi

11、tion approved for publication 1st September 2017 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2017 ASD-STAN prEN 3645-010:2017 (E) 2 Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Terms and definitions . 3 4 Required c

12、haracteristics 3 5 Designation . 7 6 Marking . 8 7 Technical specification . 8 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process M

13、anual, this standard has received approval for Publication. prEN 3645-010:2017 (E) 3 1 Scope This standard specifies the characteristics of hermetic receptacles with jam nut mounting in the family of circular, electrical connectors, with triple start threaded coupling. It applies to models in Table

14、3. For plugs and protective covers, see EN 3645-006, EN 3645-008, EN 3645-011 and EN 3645-012 respectively. The contacts are unremovable and soldered termination. These connectors are derived from and interchangeable with model Y in specification MIL-DTL-38999/23. 2 Normative references The followin

15、g documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3645-001, Aerosp

16、ace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 001: Technical specification EN 3645-002, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperatu

17、re 175 C or 200 C continuous Part 002: Specification of performance and contact arrangements EN 3645-006, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 006: Protective cover for receptacle Product

18、standard EN 3645-008, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 008: Non release plug with grounding ring Product standard EN 3645-011, Aerospace series Connectors, electrical, circular, scoop-

19、proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 011: Lanyard release plug with grounding fingers Type 1 Product standard EN 3645-012, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175

20、C or 200 C continuous Part 012: Lanyard release plug with grounding fingers Type 2 Product standard MIL-DTL-38999/23, Connectors, electrical, circular, threaded, receptacle, jam-nut mounting, hermetic, hermetic solder contacts, series III, metric 1) 3 Terms and definitions For the purposes of this d

21、ocument, the terms and definitions given in EN 3645-001 apply. 4 Required characteristics 4.1 Dimensions and mass See Figure 1 and Table 1. Dimensions and tolerances are in millimetres. 1) Published by: Department of Defense (DOD), The Pentagon, Washington D.C. 20301 USA. prEN 3645-010:2017 (E) 4 C

22、(without seal) Seal Option D (seal slot with close edges) Key 1 Red strip 3 Seal 2 3 holes 1,5 min. for brake wire (see option according to Detail D) 4 B on flat Figure 1 Hermetic jam nut receptacle prEN 3645-010:2017 (E) 5 Table 1 Hermetic jam nut receptacle Dimensions Shell size A B Flat C a D E F

23、 b G Thread H 0,3 0,10 0,15 0,10 0,20 0,13 0,03 0,13 max. 09 30,2 16,53 17,40 2,39 1,14 15,9 M171 6g 0,1 R 24,00 21,82 11 34,9 19,07 20,60 18,8 M201 6g 0,1 R 27,00 24,99 13 38,1 23,82 25,40 23,8 M251 6g 0,1 R 32,00 29,77 15 41,3 26,97 28,50 26,8 M281 6g 0,1 R 36,00 32,91 17 44,5 30,15 31,85 30,8 M32

24、1 6g 0,1 R c 37,00 36,12 19 49,2 33,32 34,90 3,58 1,91 33,8 M351 6g 0,1 R 41,00 39,25 21 52,4 36,50 37,90 36,8 M381 6g 0,1 R 46,00 42,47 23 55,6 39,67 41,20 39,8 M411 6g 0,1 R 50,00 45,61 25 58,7 42,85 44,40 42,8 M441 6g 0,1 R 51,23 49,25 L M N P S W X Y Z Mass g max. Stainless steel 0,3 0 0,3 0,4 0

25、,1 0,4 0,3 0,1 max. 9,10 16,3 15,30 14,1 27,0 2,6 29,2 20,50 20,19 1,85 1,70 34 9,10 19,4 18,40 31,8 25,27 24,97 41 9,10 22,7 21,60 14,3 34,9 29,3 28,45 28,14 50 9,10 25,9 24,80 38,1 31,62 31,32 62 9,10 29,0 28,00 41,3 34,80 34,49 83 9,70 32,2 31,20 46,0 3,4 30,1 37,92 37,62 2,69 2,54 108 9,70 35,4

26、34,30 49,2 41,20 40,69 141 9,70 38,6 37,50 52,4 44,37 43,86 172 9,70 41,7 40,70 55,6 47,55 47,04 203 a Dimensions C and 1,5 mm shall be compatible with the panel hole. b Diameter F corresponds to the start of the thread. c Upper diameter modified as follow: 31,95 max. 31,80 min. prEN 3645-010:2017 (

27、E) 6 4.2 Materials and surface treatment See Table 3. 4.3 Recommended panel cut-out See Figure 2 and Table 2. Dimensions and tolerances are in millimetres. Figure 2 Panel cut-out Table 2 Panel cut-out - Dimensions Shell size A B a C 0,25 0 0 0,25 min. 09 17,60 16,70 31,80 11 20,96 19,59 35,00 13 25,

28、65 24,26 39,40 15 28,83 27,56 42,50 17 32,01 30,73 45,70 19 35,18 33,91 48,50 21 38,35 37,08 51,70 23 41,53 40,26 54,90 25 44,70 43,43 58,00 a Shell size 9, tolerance is 0,060,10 mm. 4.4 Electrical, mechanical and climatic characteristics See EN 3645-002. prEN 3645-010:2017 (E) 7 5 Designation EXAMP

29、LE Description block ELECTRICAL CONNECTOR Identity block EN3645-Y7GN35MA Number of the basic standard Model (see Table 3) Shell code for jam nut mounting receptacle (see EN 3645-002) Shell size code (see Table 4) Only N: no grounded cavity Contact arrangement (see EN 3645-002) except those containin

30、g coaxial or triaxial contacts or size 10 contacts or quadrax contacts Contact code M: male with solder cup X: male with eyelet Polarization: N, A, B, C, D, E NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. Table 3 Model coding Model Descriptio

31、n Y Hermetic receptacles, passivated stainless steel Solder contacts Maximum operating temperature 200 C continuous Table 4 Shell size code Shell size Code 09 A 11 B 13 C 15 D 17 E 19 F 21 G 23 H 25 J prEN 3645-010:2017 (E) 8 6 Marking According to EN 3645-001. 7 Technical specification According to EN 3645-001.