ASD-STAN PREN 3660-037-2008 Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 037 bushing strip elastomer for cable outl.pdf

1、ASD STANDARD NORME ASD ASD NORM prEN 3660-037 Edition P 1 September 2008 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATIONAvenue de Tervuren, 270 - B-1150 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 763 3565 - www.asd-stan.orgICS: Descriptors: ENGLISH VERSIO

2、N Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 037: bushing strip, elastomer, for cable outlet, style Z Product standard Srie arospatiale Accessoires arrire pour connecteurs circulaires et rectangulaires lectriques et optiques Partie 0

3、37 : Bande de traverse en lastomre, pour accessoire arrire, type Z Norme de produit Luft- und Raumfahrt Endgehuse fr elektrische und optische Rund- und Rechteck- steckverbinder Teil 037: Aufftterungsstreifen, Elastomer, Bauform Z Produktnorm This “Aerospace Series“ Prestandard has been drawn up unde

4、r the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publ

5、ication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft Eur

6、opean Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standar

7、ds conflicting with the EN. Edition approved for publication 30 September 2008 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2008 by ASD-STAN prEN 3660-037:2008 2 Contents Page Foreword2 1 Scope 3 2 Normative references 3 3 Terms and

8、definitions .3 4 Characteristics.3 5 Designation 5 6 Marking .5 7 Technical specification .5 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs Gen

9、eral Process Manual, this standard has received approval for Publication. prEN 3660-037:2008 3 1 Scope This product standard defines a bushing strip, style Z, for use under the following conditions: Associated cable outlet (s) : EN 3660-002 Temperature range : 65 C to 200 C 2 Normative references Th

10、e following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3660-001, Aerospace series Cable outlet accessor

11、ies for circular and rectangular electrical and optical connectors Part 001: Technical specification. EN 3660-002, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 002: Index of product standards. EN 3660-020, Aerospace series Cable outlet

12、 accessories for circular and rectangular electrical and optical connectors Part 020: Cable outlet, style A, straight, unsealed, self-locking with clamp strain relief Product standard. 1)EN 3660-021, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connec

13、tors Part 021: Cable outlet, style A, 90, unsealed, self-locking with clamp strain relief Product standard. 1)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3660-001 apply. 4 Characteristics 4.1 Dimensions and mass For dimensions and mass, see Figure

14、 1 and Table 1. All dimensions are in millimetres. 1) Published as ASD Prestandard at the date of publication of this standard. prEN 3660-037:20084 Key 1 Part number identified on centre in raised figures on this side Figure 1 Table 1 A Mass 0,8 max. Dash No. mm g Used on shell size of EN 3660-020 a

15、nd EN 3660-021 01 7,92 8,0 09-17 02 11,18 11,0 19-25 4.2 Material Material: Elastomer 4.3 Tests Test and qualification are performed on appropriate cable outlet. prEN 3660-037:2008 5 5 Designation EXAMPLE 1 Description block CABLE OUTLET Identity block EN3660-037XX Standard number Dash No., see Tabl

16、e 1 EXAMPLE 2 EN3660-03701 Bushing strip, elastomer, Dash No. 01. NOTE 1 No gaps are required between sections in the part number when printed. NOTE 2 If necessary, the code I9005 may be placed between the description block and the identity block. 6 Marking Refer to EN 3660-001. 7 Technical specification Refer to EN 3660-001.