ASD-STAN PREN 4056-002-2012 Aerospace series Cable ties for harnesses Part 002 Index of product standards (Edition P 2).pdf

1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM prEN 4056-002 Edition P 2 June 2012 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATIONAvenue de Tervuren, 270 - B-1150 Brussels - Tel. 32 2 775 8126 - Fax. 32 2 775 8131 - www.asd-stan.orgICS: Supersedes Edition P1

2、 of June 2002 Descriptors: ENGLISH VERSION Aerospace series Cable ties for harnesses Part 002: Index of product standards Srie arospatiale Frettes de cblage pour harnais Partie 002 : Liste des normes de produit Luft- und Raumfahrt Befestigungsbnder fr Leitungsbndel Teil 002: bersicht ber die Produkt

3、normen This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the c

4、oncerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and

5、formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the stat

6、us of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 30 June 2012 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2012 by ASD-STAN prEN 4056-002:2012 (E) 2 Content

7、s Page Foreword 2 1 Scope 3 2 Normative references 3 3 List of product standards .3 4 Description .4 5 Quality assurance 4 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD

8、-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. prEN 4056-002:2012 (E) 3 1 Scope This standard provides a list of product standards for cable ties for harnesses under EN 4056-001. 2 Normative references The following referenced documents are in

9、dispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 4056-001, Aerospace series Cables ties for harnesses Part 001: Technical specification

10、EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts 3 List of product standards EN 4056-001, Aerospace series Cables ties for harnesses Part 001: Technical specification EN 4056-003, Aerospace series Cable ties for harnesses Part 003: Plastic cab

11、le ties, operating temperatures 65 C to 105 C and 65 C to 150 C Product standard 1)EN 4056-004, Aerospace series Cable ties for harnesses Part 004: Plastic cable ties, operating temperatures 55 C to 105 C and 55 C to 150 C Product standard 2)EN 4056-005, Aerospace series Cable ties for harnesses Par

12、t 005: Plastic cable ties with metallic locking devices, operating temperatures 65 C to 105 C and 65 C to 150 C Product standard 1)EN 4056-006, Aerospace series Cables ties for harnesses Part 006: Peek cable ties, operating temperatures 55 C to 240 C Product standard 2)1) Published as ASD-STAN Prest

13、andard at the date of publication of this standard (www.asd-stan.org). 2) In preparation at the date of publication of this standard. prEN 4056-002:2012 (E) 4 4 Description 4.1 Material codes See Table 1. Table 1 Material codes Material code Material type Temperature rating Material characteristics

14、A Plastic 65 C to 105 C Non UV resistant B Plastic 65 C to 105 C UV resistant C Plastic 65 C to 150 C Non UV resistant D Plastic 65 C to 150 C UV resistant E Plastic 55 C to 105 C Non UV resistant F Plastic 55 C to 105 C UV resistant G Plastic 55 C to 150 C Non UV resistant H Peek 55 C to 240 C Non UV resistant 4.2 Colour codes See Table 2. Table 2 Colour codes Code Colour0 Black 1 Brown 2 Red3 Orange 4 Yellow 5 Green 6 Blue 7 Violet 8 Grey 9 Natural/unpigmented 5 Quality assurance See EN 9133.