ASD-STAN PREN 4165-006-2003 Aerospace Series Connectors Electrical Rectangular Modular Operating Temperature 175 Degrees C Continuous Part 006 Plug for 2 and 4 Modules Series 2 Pro.pdf

1、AECMA STANDARD NORME AECMA AECMA NORM Edition approved for publication 28 February 2003 prEN 41 65-006 Edition P 1 February 2003 Comments should be sent within six months after the date of publication to Electrical Domain AECMA-STAN ICs: 49.060 Descriptors: ENGLISH VERSION Aerospace series Connector

2、s, electrical, rectangular, modular Operating temperature 175 OC continuous Part 006: Plug for 2 and 4 modules, series 2 Product standard Srie arospatiale Luft- und Raumfahrt Connecteurs lectriques rectangulaires Elektrischer Rechtecksteckverbinder Temprature dutilisation 175 OC continu Betriebstemp

3、eratur 175 OC konstant Partie 006 : Fiches 2 et 4 modules, Teil 006: Freier Steckverbinder mit 2 und 4 Modulen, modulaires in modularer Bauweise srie 2 Norme de produit Serie 2 Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of AECMA-STAN (The European Asso

4、ciation of Aerospace Industries - Standardization). It is published on green paper for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical con

5、tent shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of AECMA-STAN it will be submitted as a draft European Standard to CEN (European Committee for

6、 Standardization) for formal vote. Page 2 prEN 4165-006: 2003 Foreword This standard was reviewed by the Domain Technical Coordinator of AECMA-STANS Electrical Domain. After inquiries and votes carried out in accordance with the rules of AECMA-STAN defined in AECMA- STANS General Process Manual, thi

7、s standard has received approval for Publication. Contents Page 1 Scope 2 Normative references . 3 Terminology 4 Required characteristics 5 Clicker-nut plug 6 Designation . 7 Marking . 8 Technical specification Page 3 prEN 4165-006: 2003 1 Scope This standard defines the plug series 2, for 2 and 4 m

8、odules used in the family of rectangular electrical connectors. The receptacles corresponding to those plugs are defined in EN 4165-002. The protective covers corresponding to those plugs are defined in EN 41 65-01 9. 2 Normative references This European Standard incorporates by dated or undated ref

9、erence provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorpor

10、ated in it by amendment or revision. For undated references the latest edition of the publication referred to apply. EN 2424, EN 41 65-001, EN 41 65-002, EN 41 65-01 9, Aerospace series - Marking of aerospace products Aerospace series - Connectors, electrical, rectangular, modular - Operating temper

11、ature I75 “C continuous - Part 001: Technical specification - Product standard 1 ) Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature I75 “C continuous - Part 002: Specification of performance and contact arrangements 1) Aerospace series - Connectors, electrical,

12、 rectangular, modular - Operating temperature 175 “C continuous - Part 019: Protective cover for plug, for 2 and 4 modules, series 2 and series 3 - Product standard 2) EN 41 65-021, Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature I75 “C continuous - Part 021:

13、Coupling system keyway for plug - Product standard 1 ) 3 Term in ol ogy See EN 4165-001. 4 Required characteristics Dimensions are in millimetres. 1) Published as AECMA standard at the date of publication of this standard 2) In preparation at the date of publication of this standard Page 4 prEN 4165

14、-006: 2003 5 Clicker-nut plug 5.1 See Figure 1 and Table 1. For 2 modules classes W, F, J, M and A a active thread hexagonal groove seeTable 1. Figure 1 Table 1 Class w, F, A 15,lO max. 15,90 max. Page 5 prEN 4165-006: 2003 5.2 See Figure 2 and Table 2. For 4 modules classes W, F, J, M and A a activ

15、e thread hexagonal groove seeTable2. Figure 2 Table 2 w, F, A 15,lO max. J, M 15,90 max. Page 6 prEN 4165-006: 2003 Type 6: Plug (see EN 4165-002) A = series 2 Table 3 - Plug class Shell type Class 4 = plug 4 modules 2 = plug 2 modules Plug keying coupling (number not marked on the connector) W F J

16、M A Description Plug with housing (shell) olive drab cadmium plated, aluminium alloy, conducting finish, 500 hours resistance to salt mist, maximum operating temperature 175 “C continuous Plug with housing (shell) black nickel plated, aluminium alloy, 96 hours resistance to salt mist, maximum operat

17、ing temperature 175 “C continuous Plug with housing (shell) olive drab cadmium plated, composite material, conducting finish, 500 hours resistance to salt mist, maximum operating temperature 175 “C continuous Plug with housing (shell) nickel plated, composite material, conducting finish, 500 hours r

18、esistance to salt mist, maximum operating temperature 175 “C continuous Plug with housing (shell) black anodised plated, aluminium alloy, no conducting finish, 48 hours resistance to salt mist, maximum operating temperature 175 “C continuous 6 Designation EXAMPLE: State of delivery plug keying coupl

19、ing (see EN 4165-021) (Not marked on the connector) O - Delivered: not fitted Fitted in the plug 4 5 6 Page 7 prEN 4165-006: 2003 7 Marking Unless there are other specific contractual requirements, the marking shall be in accordance with EN 2424, category P. 8 Technical specification See EN 4165-001.