ASD-STAN PREN 4165-015-2014 Aerospace series Connectors electrical rectangular modular Operating temperature 175 continuous Part 015 Round chimney for accessory (1 per module cavit.pdf

1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM prEN 4165-015 Edition P 2 April 2014 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Rue Montoyer 10 - 1000 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 775 8131 - www.asd-stan.orgICS: 49.060 Supersedes edition

2、 P 1 of February 2003 and will supersede EN 4165-015:2005 Descriptors: ENGLISH VERSION Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 015: Round chimney for accessory (1 per module cavity), 2 and 4 modules Product standard Srie arospatiale C

3、onnecteurs lectriques rectangulaires modulaires Temprature dutilisation 175 C continu Partie 015 : Chemines cylindriques pour accessoires (1 par cavit de module), 2 et 4 modules Norme de produit Luft- und Raumfahrt Elektrischer Rechtecksteckverbinder in modularer Bauweise Betriebstemperatur 175 C ko

4、nstant Teil 015: Hlse, rund, fr Endgehuse (eine pro Modulkammer), 2 und 4 Module Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the

5、 European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally,

6、 without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN nati

7、onal members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 1stApril 2014 Comments should be sent within six months after the date of publication to

8、 ASD-STAN Electrical Domain Copyright 2014 by ASD-STAN prEN 4165-015:2014 (E) 2 Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Terms and definitions . 3 4 Required characteristics . 3 5 Round chimney for accessories 4 6 Round chimney for accessory class . 6 7 Designation 6 8 Marking .

9、 6 9 Technical specification . 6 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for

10、 Publication. prEN 4165-015:2014 (E) 3 1 Scope This standard defines the round chimney for accessories (1 per module cavity) used in the family of rectangular electrical connectors, 2 and 4 modules. The connector accessory body corresponding to those round chimneys is defined in EN 4165-014. 2 Norma

11、tive references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments)

12、applies. EN 4165-001, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 001: Technical specification EN 4165-002, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 002: Specification of pe

13、rformance and contact arrangements EN 4165-014, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 014: Accessory, 2 and 4 modules for connectors, series 2 and series 3 Product standard 3 Terms and definitions For the purposes of this document,

14、the terms and definitions given in EN 4165-001 apply. 4 Required characteristics See Figure 1 and 2. prEN 4165-015:2014 (E) 4 5 Round chimney for accessories Dimensions are in millimetres. Mass: 1,50 g max. A 10,5 mm 0,05 mm. (groove for clip) Key 1 Hexagonal conductive clip, thread 0,6 2 Inside sec

15、tion 69,4mm2minimum Figure 1 Removable round chimney prEN 4165-015:2014 (E) 5 Mass: 1,70 g max. A 10,5 mm 0,05 mm. (groove for clip) Key 1 Hexagonal conductive clip, thread 0,6 2 R 0,5 or chamfer NOTE 1 Envelop schematic representation. NOTE 2 Chimney shall be compatible with all shielded accessory

16、body material classes and shell size types. Figure 2 Removable round chimney with cable tie support prEN 4165-015:2014 (E) 6 6 Round chimney for accessory class See Table 1. Table 1 Material class and temperature ranges Class DescriptionB Round chimney for accessory with housing (shell) nickel plate

17、d, aluminium alloy, 48 h resistance to salt spray, maximum operating temperature: 175 C continuous. F Round chimney for accessory with housing (shell) black nickel plated, aluminium alloy, 96 h resistance to salt mist, maximum operating temperature 175 C continuous W Round chimney for accessory with

18、 housing (shell) olive drab cadmium plated, aluminium alloy, 500 h resistance to salt mist, maximum operating temperature 175 C continuous 7 Designation EXAMPLE Description block ELECTRICAL CONNECTOR ROUND CHIMNEY Identity block EN4165F15A Number of the basic standard Class type (see Table 1) Type 1

19、5: Round chimney (see EN 4165-002) Cable tie option Nothing without cable tie device. A with cable tie device. 8 Marking Marking shall be applied to the chimney. This marking shall include: The identity block as defined in suitable product standard; The date of manufacture (yearweek); The manufacturers name or trade mark. 9 Technical specification See EN 4165-001.