ASD-STAN PREN 4165-024-2015 Aerospace series Connectors electrical rectangular modular Operating temperature 175 continuous Part 024 Single module plug Product standard (Edition P .pdf

1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM prEN 4165-024 Edition P 2 March 2015 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Rue Montoyer 10 - 1000 Brussels - Tel. 32 2 775 8126 - Fax. 32 2 775 8131 - www.asd-stan.org ICS: 49.060 Supersedes edition P

2、1 of May 2010 and will supersede EN 4165-024:2011 Descriptors: ENGLISH VERSION Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 024: Single module plug Product standard Srie arospatiale Connecteurs lectriques rectangulaires, modulaires Temprat

3、ure dutilisation 175 C continu Partie 024 : Fiche mono-module Norme de produit Luft- und Raumfahrt Elektrischer Rechtecksteckverbinder in modularer Bauweise Betriebstemperatur 175 C konstant Teil 024: Freier Steckverbinder fr Einzelmodul Produktnorm This “Aerospace Series“ Prestandard has been drawn

4、 up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to

5、the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a d

6、raft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national

7、 standards conflicting with the EN. Edition approved for publication 1st March 2015 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2015 by ASD-STAN prEN 4165-024:2015 (E) 2 Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3

8、Terms and definitions .3 4 Required characteristics .3 5 Designation . 11 6 Marking 11 7 Technical specification 11 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN d

9、efined in ASD-STANs General Process Manual, this standard has received approval for Publication. prEN 4165-024:2015 (E) 3 1 Scope This standard defines the single module plug used in the family of rectangular electrical connectors. The receptacle corresponding to this plug is defined in EN 4165-025.

10、 Accessories and protective cover corresponding to those plugs are defined in EN 4165-026. The cavity of this connector is uncoded, so it can accept polarized modules N, A, B, C and D as defined in EN 4165-002. 2 Normative references The following documents, in whole or in part, are normatively refe

11、renced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products EN 4165-001, Aero

12、space series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 001: Technical specification EN 4165-002, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 002: Specification of performance and contact arra

13、ngements EN 4165-025, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 025: Module receptacle Product standard EN 4165-026, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 026: Accessor

14、ies for single module connector Product standard 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4165-001 apply. 4 Required characteristics 4.1 Single module plug design Dimensions, alternative design and positions of keying polarization see EN 4165-0

15、01. Colour of locking system according polarization, see Clause 5. See Figures 1 to 8. Dimensions are in millimetres. Mass = 10,6 g max. prEN 4165-024:2015 (E) 4 Figure 1 With alternatives designs prEN 4165-024:2015 (E) 5 Key 1 Locking side down A = 9,1 min. Figure 2 With alternatives designs prEN 4

16、165-024:2015 (E) 6 Figure 3 With alternatives designs prEN 4165-024:2015 (E) 7 Key 1 Module keying 2 Index for rear accessory orientation (opposite side from keying module) Figure 4 With alternatives designs prEN 4165-024:2015 (E) 8 Figure 5 Detail of bayonet location with alternatives designs Figur

17、e 6 With alternatives designs prEN 4165-024:2015 (E) 9 Key 1 Cavity Figure 7 With alternatives designs prEN 4165-024:2015 (E) 10 Figure 8 With alternatives designs prEN 4165-024:2015 (E) 11 4.2 Class See Table 1. Table 1 Class Description M Receptacle with housing (shell) nickel plated, composite ma

18、terial, conducting finish, 500 hours resistance to salt mist, maximum operating temperature 175 C continuous. 5 Designation EXAMPLE Description block ELECTRICAL CONNECTOR PLUG Identity block EN4165 M 6 1 A N Number of the basic standard Classes type, see 4.2 M = composite nickel plated Type 6: plug

19、(see EN 4165-002) Number of module Type 1 = Mono module Type A = Module type series 2 (see EN 4165-002) Polarization code: Code Colour N Black A Red B Blue C Green D Yellow E Pink F Clear green G Clear grey H Light olive Polarization N to H are mechanically and colour coded (9 polarizations). 6 Marking Unless there are other specific contractual requirements, the marking shall be in accordance with EN 2424, category P. 7 Technical specification See EN 4165-001.