ASD-STAN PREN 4644-024-2014 Aerospace series Connector electrical and optical rectangular modular rectangular inserts operating temperature 175 (or 125 continuous Part 024 Receptac.pdf

1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM prEN 4644-024 Edition P 1 August 2014 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Rue Montoyer 10 - 1000 Brussels - Tel. 32 2 775 8126 - Fax. 32 2 775 8131 - www.asd-stan.org ICS: 49.060; 49.090 Descriptors:

2、 ENGLISH VERSION Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous Part 024: Receptacle size 2 with class A, C and E Product standard Srie arospatiale Connecteur, lectrique et optique, rectangulaire, modul

3、aire, inserts rectangulaires, temprature de fonctionnement 175 C (ou 125 C) continu Partie 024 : Embase, taille 2, classes A, C et E Norme de produit Luft- und Raumfahrt Elektrische und optische Rechtecksteckverbinder, modular, rechteckige Kontakteinstze, Dauerbetriebstemperatur 175 C (oder 125 C) k

4、onstant Teil 024: Fester Steckverbinder, Gre 2, Klassen A, C und E Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aero

5、space Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-id

6、entification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members h

7、ave then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 1st August 2014 Comments should be sent within six months after the date of publication to ASD-STAN El

8、ectrical Domain Copyright 2014 by ASD-STAN prEN 4644-024:2014 (E) 2 Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Terms and definitions . 3 4 Required characteristics . 4 5 Designation 7 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical D

9、omain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. prEN 4644-024:2014 (E) 3 1 Scope This standard specifies the size 2 receptacle for disconnect applications used in t

10、he family of modular rectangular electrical and optical connector with rectangular inserts. The plug corresponding to this receptacle is defined in EN 4644-021 or EN 4644-022 or EN 4644-023. 2 Normative references The following documents, in whole or in part, are normatively referenced in this docum

11、ent and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 4644-001, Aerospace series Connector, electrical and optical, rectangular, modular, rectan

12、gular inserts operating temperature 175 C (or 125 C) continuous Part 001: Technical specification EN 4644-002, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts operating temperature 175 C (or 125 C) continuous Part 002: Specification of performance and co

13、ntact arrangements EN 4644-021, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous Part 021: Plug, size 2, without mounting holes, class A, C and E Product standard 1) EN 4644-022, Aerospace series Connecto

14、r, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous Part 022: Plug, size 2, with mounting holes, class A, C and E Product standard 1) EN 4644-023, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular

15、 inserts, operating temperature 175 C (or 125 C) continuous Part 023: Plug, size 2, with ground block, class B and F Product standard 1) 3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 4644-001 apply. 1) Published as ASD-STAN Prestandard at the date o

16、f publication of this standard. http:/www.asd-stan.org/ prEN 4644-024:2014 (E) 4 4 Required characteristics 4.1 Dimensions and recommended panel cut-out See Figure 1 to Figure 3. Key 1 See EN 4644-001. 2 19,00 axis 3 Two 3,09 min. (3,20 max.) clear holes or 6-32 UNC self-locking threaded holes or 4-

17、40 UNC self-locking threaded holes NOTE Ar, Br, Cr axis, see EN 4644-001. Figure 1 prEN 4644-024:2014 (E) 5 NOTE Ar axis, see EN 4644-001. Figure 2 prEN 4644-024:2014 (E) 6 Key 1 Two screws head maximum diameter: 6 Figure 3 Panel cut-out 4.2 Mass 50 g max. prEN 4644-024:2014 (E) 7 5 Designation EXAM

18、PLE Description block ELECTRICAL CONNECTOR SIZE 2, RECEPTACLE Identity block EN 4644-024ADX Number of this standard Shell class (see EN 4644-002) Housing type (see Figures 1 and 2) B: with no mounting holes D: with 2 3,09 min. (3,20 max.) clear holes F: with 2 6-32 UNC threaded holes L: with 2 4-40 UNC threaded holes Polarization code (see EN 4644-002)