ASD-STAN PREN 4652-002-2016 Aerospace series Connectors coaxial radio frequency Part 002 Specification of performances (Edition P 1).pdf

1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM prEN 4652-002 Edition P 1 June 2016 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Rue Montoyer 10 - 1000 Brussels - Tel. 32 2 775 8126 - Fax. 32 2 775 8131 - www.asd-stan.org ICS: Descriptors: ENGLISH VERSION

2、Aerospace series Connectors, coaxial, radio frequency Part 002: Specification of performances Luft- und Raumfahrt Koaxiale Hochfrequenz-Steckverbinder Teil 002: Leistungsdaten Srie arospatiale Connecteurs coaxiaux pour radio frquences Partie 002 : Spcification de performances This “Aerospace Series“

3、 Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following memb

4、er comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN,

5、it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and

6、by withdrawing any national standards conflicting with the EN. ASD-STAN Technical Committee approves that: “This document is published by ASD-STAN for the needs of the European Aerospace Industry. The use of this standard is entirely voluntary, and its applicability and suitability for any particula

7、r use, including any patent infringement arising therefrom, is the sole responsibility of the user.” ASD-STAN reviews each standard and technical report at least every five years at which time it may be revised, reaffirmed, stabilized or cancelled. ASD-STAN invites you to send your written comments

8、or any suggestions that may arise. All rights reserved. No parts of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of ASD-STAN. Order details

9、: E-mail: salesasd-stan.org Web address: http:/www.asd-stan.org/ Edition approved for publication 1st June 2016 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2016 ASD-STAN prEN 4652-002:2016 (E) 2 Contents Page Foreword 2 1 Scope 3 2

10、Normative references 3 3 List of product standards . 3 4 Required characteristics 4 5 Technical specification . 5 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN def

11、ined in ASD-STANs General Process Manual, this standard has received approval for Publication. prEN 4652-002:2016 (E) 3 1 Scope This standard specifies the list of product standards and common characteristics of connectors coaxial radio frequency for use in electrical systems of aircraft. 2 Normativ

12、e references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) app

13、lies. EN 4652-001, Aerospace series Connectors, coaxial, radio frequency Part 001: Technical specification 3 List of product standards EN 4652-110, Aerospace series Connectors, coaxial, radio frequency Part 110: Type 1, BNC interface Clamp nut assembly version Straight plug Product standard EN 4652-

14、111, Aerospace series Connectors, coaxial, radio frequency Part 111: Type 1, BNC interface Clamp nut assembly version Right angle plug Product standard EN 4652-112, Aerospace series Connectors, coaxial, radio frequency Part 112: Type 1, BNC interface Clamp nut assembly version Square flange receptac

15、le Product standard EN 4652-113, Aerospace series Connectors, coaxial, radio frequency Part 113: Type 1, BNC interface Clamp nut assembly version Bulkhead receptacle Product standard EN 4652-210, Aerospace series Connectors, coaxial, radio frequency Part 210: Type 2, TNC interface Clamp nut assembly

16、 version Straight plug Product standard EN 4652-211, Aerospace series Connectors, coaxial, radio frequency Part 211: Type 2, TNC interface Clamp nut assembly version Right angle plug Product standard EN 4652-212, Aerospace series Connectors, coaxial, radio frequency Part 212: Type 2, TNC interface C

17、lamp nut assembly version Square flange receptacle Product standard EN 4652-213, Aerospace series Connectors, coaxial, radio frequency Part 213: Type 2, TNC interface Clamp nut assembly version Bulkhead receptacle Product standard EN 4652-220, Aerospace series Connectors, coaxial, radio frequency Pa

18、rt 220: Type 2, crimp version, TNC interface Straight plug Product standard 1) EN 4652-221, Aerospace series Connectors, coaxial, radio frequency Part 221: Type 2, TNC interface Crimp version Right angle plug Product standard 1) EN 4652-222, Aerospace series Connectors, coaxial, radio frequency Part

19、 222: Type 2, TNC interface Crimp version Square flange receptacle Product standard 2) 1) Published as ASD-STAN Prestandard at the date of publication of this standard. (http:/www.asd-stan.org/) 2) In preparation at the date of publication of this standard. prEN 4652-002:2016 (E) 4 EN 4652-310, Aero

20、space series Connectors, coaxial, radio frequency Part 310: Type 3, N interface Clamp nut assembly version Straight plug Product standard EN 4652-311, Aerospace series Connectors, coaxial, radio frequency Part 311: Type 3, N interface Clamp nut assembly version Right angle plug Product standard EN 4

21、652-312, Aerospace series Connectors, coaxial, radio frequency Part 312: Type 3, N interface Clamp nut assembly version Square flange receptacle Product standard EN 4652-313, Aerospace series Connectors, coaxial, radio frequency Part 313: Type 3, N interface Clamp nut assembly version Bulkhead recep

22、tacle Product standard EN 4652-320, Aerospace series Connectors, coaxial, radio frequency Part 320: Type 3, N interface Crimp version Straight plug Product standard 2) EN 4652-321, Aerospace series Connectors, coaxial, radio frequency Part 321: Type 3, N interface Crimp assembly version Right angle

23、plug Product standard 1) EN 4652-322, Aerospace series Connectors, coaxial, radio frequency Part 322: Type 3, N interface Crimp version Square flange receptacle Product standard 1) EN 4652-410, Aerospace series Connectors, coaxial, radio frequency Part 410: Type 4, C interface Clamp nut assembly ver

24、sion Straight plug Product standard EN 4652-411, Aerospace series Connectors, coaxial, radio frequency Part 411: Type 4, C interface Clamp nut assembly version Right angle plug Product standard EN 4652-412, Aerospace series Connectors, coaxial, radio frequency Part 412: Type 4, C interface Clamp nut

25、 assembly version Square flange receptacle Product standard EN 4652-413, Aerospace series Connectors, coaxial, radio frequency Part 413: Type 4, C interface Clamp nut assembly version Bulkhead receptacle Product standard EN 4652-420, Aerospace series Connectors, coaxial, radio frequency Part 420: Ty

26、pe 4, C interface Crimp assembly version Straight plug Product standard 1) EN 4652-421, Aerospace series Connectors, coaxial, radio frequency Part 421: Type 4, C interface Crimp assembly version Right angle plug Product standard 1) 4 Required characteristics 4.1 Configuration, dimension and mass See

27、 product standard. 4.2 Material and finish See product standard. 4.3 Temperature Operating temperature shall be between 65 C and 165 C. prEN 4652-002:2016 (E) 5 4.4 Electrical characteristics See product standard. 4.5 General characteristics Tightening torque of cap shall be in accordance with product standard. 4.6 Delivery condition At the time of delivery and during storage the connectors must be equipped with a plastic cap for contact protection. 4.6.1 Tool and stripping lengths See product standard. 4.6.2 Admissible cables See product standard. 5 Technical specification See EN 4652-001.