ASD-STAN PREN 9300-011-2006 Aerospace series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data Part 011 Reference proce.pdf

1、ASD STANDARD NORME ASD ASD NORM prEN 9300-011 Edition P 1 October 2006 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATIONGulledelle 94 - B-1200 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 763 3565 - www.asd-stan.orgICS: Descriptors: ENGLISH VERSION Aerospace

2、series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 011: Reference process description “Data preparation“ Srie arospatiale LOTAR Archivage Long Terme et rcupration des donnes techniques produits numriques, telles que CAD 3D et P

3、DM Partie 011 : Description du processus de rfrence “Prparation des donnes“ Luft- und Raumfahrt LOTAR Langzeitarchivierung und Bereitstellung digitaler technischer Produktdokumentationen, beispielsweise 3D CAD und PDM Daten Teil 011: Referenzprozessbescheibung “Daten Vorbereitung“ This “Aerospace Se

4、ries“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following

5、 member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-S

6、TAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard

7、 and by withdrawing any national standards conflicting with the EN. Edition approved for publication 31 October 2006 Comments should be sent within six months after the date of publication to ASD-STAN Engineering Procedures and Processes Domain Copyright 2006 by ASD-STAN prEN 9300-011:20062 Contents

8、 Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms, definitions and abbreviations4 4 Applicability4 5 Data preparation 5 6 Detailed process steps description .5 6.1 General5 6.2 Select data for archiving .6 6.3 Initiate quality agent 6 6.4 Data verification.6 6.5 Automatic creation of valida

9、tion properties?.7 6.6 Automatic creation of validation properties .7 6.7 Create PDI.7 6.8 Create Descriptive Information 8 6.9 Create SIP.8 6.10 Manual creation validation properties.9 6.11 Error handling for data preparation.9 7 Support process step: Preservation Planning .9 8 Data Descriptions 9

10、8.1 General9 8.2 Involved roles 10 8.3 Involved data. 10 9 Definition Transfer to Data Generation (Milestone) 11 Bibliography. 12 Figure Figure 1 Data preparation process.5 prEN 9300-011:20063 Foreword This standard was prepared jointly by ASD-STAN and the PROSTEP iViP Association. The PROSTEP iViP

11、Association is an international non-profit association in Europe. For establishing leadership in IT-based engineering it offers a moderated platform to its nearly 200 members from leading industries, system vendors and research institutions. Its product and process data standardization activities at

12、 European and worldwide levels are well known and accepted. The PROSTEP iViP Association sees this standard and the related parts as a milestone of product data technology. Users should note that all standards undergo revision from time to time and that any reference made herein to any other standar

13、d implies its latest edition, unless otherwise stated. prEN 9300-011:20064 1 Scope EN 9300-011 provides a detailed description for the recommended data preparation process for archiving of 3D and PDM data, as overviewed in EN 9300-010. 2 Normative references The following referenced documents are in

14、dispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 14721:2003, Space data and information transfer systems Open archival information syst

15、em Reference model OAIS. EN 9300-003, Aerospace series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 003: Fundamentals and concepts. 1)EN 9300-007, Aerospace series LOTAR LOng Term Archiving and Retrieval of digital technical pro

16、duct documentation such as 3D, CAD and PDM data Part 007: Terms and References. 1)EN 9300-010, Aerospace series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 010: Overview Data Flow. 2)3 Terms, definitions and abbreviations For t

17、he purposes of this standard, the terms, definitions and abbreviations given in EN 9300-007 shall apply. 4 Applicability This EN 9300-011 is applicable to new 3-D product data records and may be applicable to existing 3D product data records, on current and earlier products, produced using previous

18、regulations, standards and procedures. The current version is focused on product data as defined in the domain specific parts. 1) In preparation at the date of publication. 2) Published as ASD Prestandard at the date of publication of this standard. prEN 9300-011:20065 5 Data preparation See Figure

19、1. Figure 1 Data preparation process The data to be archived will be prepared by the producer. This includes a defined data verification, performed by a Quality Agent tool. The data verification will test the data against defined data quality requirements, and will provide a result report. Data prep

20、aration also includes the creation of validation properties. The sub process shall be certified. Output data: Submission Information Package (SIP) Reset archiving trigger information Process control data Error fixing report 6 Detailed process steps description 6.1 General Input and output data descr

21、ibed in this standard represent the minimal requirements for the fulfilment of the process steps. Additional data may be added, but must match at a minimum the requirements for the information package. (See EN 9300-003, section 5.3.2.1 “Definition of the core model”). prEN 9300-011:20066 6.2 Select

22、data for archiving The producer selects data for archiving during an e.g. domain depended release process (this is out of scope for EN 9300). As an example, the selection can be performed at a product structure viewer of a CAD/PDM system. The process step represents the initial trigger for the archi

23、ving process. The selected e.g. CAD or PDM information defines the Content Information (CI) of the future SIP. Input data: CI Error report for producer of process step number 10: error handling for data preparation Process control data Output data: CI 6.3 Initiate quality agent The producer will tri

24、gger the process manually. The system tool “quality agent“ automatically creates validation properties from the data and checks if the data meets with the recommended data quality criteria. It is recommended that the process step is synchronized with the Producers own release process. Input data: CI

25、 Output data: CI 6.4 Data verification Whereas the purpose of validation is to ensure that the right information has been captured, the intention of verification is to ensure that the data is correctly represented. Verification rules shall ensure that a data representation meet the quality requireme

26、nts within defined tolerances. Verification is successful if no verification rule is violated. The verification rules are domain specific and are defined within EN 9300 (for example, verification rules for CAD are described in the 100 series parts of EN 9300). Only verification rules belonging to th

27、e core models are part of EN 9300. The down stream processes and the data outputs are determined by the result of the “data verification”. Input data: CI Data quality rules Output data: If data verification is successful: CI Reference to Results report (The integration of this information into the D

28、escriptive Information is optional) Results Report If data verification fails: Data preparation error report prEN 9300-011:20067 6.5 Automatic creation of validation properties? The producer has to decide if a manual or automatic creation of validation properties is possible. Input data: CI Output d

29、ata: CI 6.6 Automatic creation of validation properties The Producer initiates the source system to calculate validation properties automatically. The Validation properties are used later for validation within the process step “INGEST Generate AIP“. Possible validation properties are: Validation pro

30、perties for 3D CAD Data, e.g. weight, centre of gravity, . Validation properties for PDM product structure information (future: Validation properties for CAx and electric harness, .) It is recommended that validation properties shall be extracted from the Content Information directly. Alternatively

31、validation properties can be generated manually and saved within the Preservation Description Information (PDI). The sub processes detailing the specific actions in case of failure or success of the creation of validation properties are not represented. Where needed, it will be detailed in the recom

32、mended practises associated to the part 11. Input data: CI Validation property rules data Output data: CI Validation properties 6.7 Create PDI The producer creates the Preservation Description Information (PDI). The PDI is the information which is necessary for adequate preservation of the Content I

33、nformation and which can be categorized as Provenance, Reference, Fixity, and Context information. As an addition for EN 9300, the producer shall integrate validation properties information into the PDI to ensure the existence of Validation Properties for later automatic validation processes. A furt

34、her addition belongs to the Proprietary Rights: Product data may be covered by proprietary rights that shall be protected. All information that the Producer wishes to declare as proprietary shall be identified as proprietary. Information regarding proprietary rights shall be associated with the prod

35、uct data to assure the information is appropriately marked to provide the protection warranted such product data. Sean will provide a new sentence. prEN 9300-011:20068 PDI is categorized as: Provenance: the integrity of an information object is partly embodied in tracing from where it came. To prese

36、rve the integrity of an information object, digital archives must preserve a record of its origin and chain of custody. Reference: provides one or more identifiers, or systems of identifiers, by which the Content Information may be uniquely identified. Fixity: If an object is not fixed, and the cont

37、ent is subject to change or withdrawal without notice, then its integrity may be compromised. Fixity information prevents such change. Context: Context describes how the Content Information relates to other information outside the Information Package. For example, it would describe why the Content I

38、nformation was produced, and it may include a description of how it relates to another Content Information object. Input data: Validation properties Results report Output data: If creation of PDI is successful: PDI If creation of PDI fails: Reset archiving trigger information 6.8 Create Descriptive

39、Information The producer creates a set of Descriptive Information (DI), which includes archive meta data meeting the archives requirements (according to ISO 14721:2003 OAIS). The descriptive information includes a reference to the data verification results report. Input data: Results report, as refe

40、rence information Output data: DI 6.9 Create SIP The producer creates a SIP by combining the DI, PDI and CI into one package. The SIP contains also Packaging Information (PI. The PI is that information which, either actually or logically, binds, identifies and relates the CI and PDI. The SIP will be

41、 transferred to the archive. The formats of the packages are defined in a submission agreement between the producer and the archive. Input data: CI PDI DI PI Output data: SIP prEN 9300-011:20069 6.10 Manual creation validation properties The producer shall be able to create a set of predefined valid

42、ation properties manually, in the case that the producing system is not able to calculate the needed validation properties. The manual creation of validation properties must be documented within the archiving process for of traceability reasons. This includes the basis data for the validation proper

43、ties and the expected results. Input data: CI Output data: Validation properties CI 6.11 Error handling for data preparation Within this process the Producer has to perform an error handling procedure. This contains the decision if data is still usable or has to be generated newly. Input data: Error

44、 report data preparation Output data: Process control data Error fixing report CI 7 Support process step: Preservation Planning The process provides services and functions for monitoring the environment of the archive and recommendations to ensure that the information stored in the archive remains a

45、ccessible to the consumer over the long term, even if the original computing environment becomes obsolete. Preservation Planning functions include developing recommendations for archive standards and policies and monitoring changes in the technology environment, archiving format and the addressed co

46、nsumer. Output data: Quality rules data Validation property rules data 8 Data Descriptions 8.1 General The descriptions here are informative; the definitions are found in the part EN 9300-007. prEN 9300-011:200610 8.2 Involved roles 8.2.1 Producer The producer is an organization, person, or client s

47、ystem, which provides the information to be preserved. This can include other archives or internal archive personnel or system components. Typical roles of type “producer“ may be. System Designers, Design Engineers, Subcontractors, Manufactures or Test Engineers. 8.2.2 Quality agent It is recommende

48、d that the Quality Agent is a system (tool set), but it may be an organization or a person which is responsible for completeness, quality and consistency of the data to be retain according a defined list of quality criteria. 8.3 Involved data 8.3.1 Content Information (CI) The Content Information in

49、cludes the set of information that is the original target of preservation. 8.3.2 Descriptive information (DI) The set of information, consisting primarily of Package Descriptions, which is provided to Data Management to support the finding, ordering, and retrieving by Consumers of archived information holdings. The descriptive information will be extended with the storage information and additionally with reference information for the CAD m