ASHRAE 90 1-2013 I-P SUPP-2015 Energy Standard for Buildings Except Low-Rise Residential Buildings.pdf

1、ANSI/ASHRAE/IES Addenda a, c, d, e, g, h, j, k, m, n, o, p, q, r, s, z,aa, ac, ad, ae, ag, ak, bm, and dx toANSI/ASHRAE/IES Standard 90.1-2013Energy Standardfor BuildingsExcept Low-RiseResidential Buildings(I-P and SI)See Appendix A for approval dates.These addenda were approved by a Standing Standa

2、rd Project Committee (SSPC) for which the Standards Committee has estab-lished a documented program for regular publication of addenda or revisions, including procedures for timely, documented, con-sensus action on requests for change to any part of the standard. The change submittal form, instructi

3、ons, and deadlines may beobtained in electronic form from the ASHRAE website (www.ashrae.org) or in paper form from the Senior Manager of Standards. The latest edition of an ASHRAE Standard may be purchased on the ASHRAE website (www.ashrae.org) or from ASHRAE Cus-tomer Service, 1791 Tullie Circle,

4、NE, Atlanta, GA 30329-2305. E-mail: ordersashrae.org. Fax: 678-539-2129. Telephone: 404-636-8400 (worldwide), or toll free 1-800-527-4723 (for orders in US and Canada). For reprint permission, go towww.ashrae.org/permissions. 2015 ASHRAE ISSN 1041-23362015 SupplementASHRAE Standing Standard Project

5、Committee 90.1 for Addenda ak and dxCognizant TC: 7.6, Systems Energy UtilizationSPLS Liaison: Mark P. ModeraASHRAE Staff Liaison: Steven C. FergusonIESNA Liaison: Rita M. Harrold Stephen V. Skalko*, Chair Itzhak H. Maor* James BenneyDrake H. Erbe*, Vice-Chair James P. McClendon* Randall BlanchetteM

6、ichael D. Lane*, Vice-Chair Raymond F. McGowan* Kym CareySusan I. Anderson* Michael W. Mehl* Ernest A. ConradPeter A. Baselici* Harry P. Misuriello* Darryl DeAngelesJeffrey G. Boldt* Frank T. Morrison* James DouglasDonald M. Brundage* Timothy M. Peglow* Mike ErbesfeldRon Burton* Eric E. Richman* Ron

7、 GormanCharles C. Cottrell* Steven Rosenstock* Brian D. HahnlenThomas Culp* Leonard C. Sciarra* David HandworkS. Craig Drumheller* Maria Spinu* David HerronAllan B. Fraser* Frank A. Stanonik* Scott HintzJason J. Glazer* Wayne Stoppelmoor* Bjorn LondoDavid Grassl* Christian R. Taber* Merle F. McBride

8、Chad Groshart * Steven Taylor* Michael I. RosenbergPekka Hakkarainen* Michael Tillou* Robert RossSusanna Hanson* Martha G. VanGeem* Martha (Marty) G. SalzbergRichard Heinisch* McHenry Wallace, Jr.* Terry SmithNed B. Heminger* Richard D. Watson* Don SurrenaJohn F. Hogan Jerry W. White, Jr.* William J

9、. TalbertJonathan Humble* Jeremy Williams* Michael TillouHyman M. Kaplan* Steven Winkel*Richard Lord* Karim Amrane* Denotes members of voting status when the document was approved for publicationASHRAE Standing Standard Project Committee 90.1 for Addenda a, c, d, g, h, and acCognizant TC: 7.6, Syste

10、ms Energy UtilizationSPLS Liaison: Mark P. ModeraASHRAE Staff Liaison: Steven C. FergusonIESNA Liaison: Rita M. HarroldDrake Erbe,* Chair Itzhak H. Maor* Randall BlanchetteRichard Lord*, Vice-Chair Ray McGowan* Kym CareyMichael D. Lane*, Vice-Chair Michael W. Mehl* Jay CrandallPeter A. Baselici* Fra

11、nk T. Morrison* Darryl DeAngelesJeffrey G. Boldt* Harry Misuriello* James DouglasDonald M. Brundage* Frank Myers* Brian D. HahnlenErnest Conrad* Timothy M. Peglow* David HandworkCharles C. Cottrell* Eric E. Richman* Scott HintzThomas Culp* Steven Rosenstock* Michael IvanovichS. Craig Drumheller* Rob

12、ert Ross* Hy KaplanAllan B. Fraser* Leonard C. Sciarra* Merle F. McBrideJim Garrigus* Stephen Skalko* Ron NicksonJason J. Glazer* Frank A. Stanonik* Michael I. RosenbergDavid Grassl* Wayne Stoppelmoor* Ms Marty G. SalzbergChad Groshart * Christian R. Taber* Kenneth SeibertPekka Hakkarainen* William

13、Talbert Don SurrenaSusanna Hanson* Steven Taylor* William J. TalbertRichard Heinisch* McHenry Wallace, Jr.* Michael TillouNed B. Heminger* Jerry W. White, Jr.* Martha VanGeemDavid Herron* Jeremy Williams* Richard WatsonJohn F. Hogan* James Benney Steven WinkelJonathan Humble* Sean Bielman* Denotes m

14、embers of voting status when the document was approved for publication ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digital form is not permitted without ASHRAEs prior written permission.ASHRAE Standing Standard Project Com

15、mittee 90.1 for Addenda e, j, k, m, n, o, p, q, r, s, z, a, ad, ae, af, ag, bmCognizant TC: Systems Energy UtilizationSPLS Liaison: Mark ModeraASHRAE Staff Liaison: Steven C. FergusonIES Liaison: Rita M. HarroldDrake Erbe,* Chair Timothy M. Peglow* Gary AshMichael D. Lane,* Vice-Chair Eric E. Richma

16、n* Joseph BrooksRichard Lord*, Vice-Chair Robert Ross* Don BrundagePeter A. Baselici* Leonard C. Sciarra* Jay CrandallJeffrey G. Boldt* Wayne Stoppelmoor* James DouglasThomas Culp* Christian R. Taber* Antonio GiacobbeJim Garrigus* William Talbert* Stan HarbuckJason J. Glazer* Steven Taylor* Michael

17、IvanovichDavid Grassl* Martha VanGeem* Hy KaplanPekka Hakkarainen* McHenry Wallace, Jr.* Neil LeslieSusanna Hanson* Jerry W. White, Jr.* Merle F. McBrideRichard Heinisch* Ernest Conrad* Benjamin MeyerNed B. Heminger* Charles C. Cottrell* Ron NicksonScott Hintz* S. Craig Drumheller* Mark NowakJohn F.

18、 Hogan* Chad Groshart * Michael I. RosenbergJonathan Humble* Ray McGowan* Marty G. SalzbergItzhak H. Maor* Harry Misuriello* Amy SchmidtChris Mathis* Steven Rosenstock* Kelly SeegerMichael W. Mehl* Frank A. Stanonik* Don SurrenaFrank T. Morrison* Jeremy Williams* Michael TillouFrank Myers* Karim Amr

19、ane Richard Watson* Denotes members of voting status when the document was approved for publication ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digital form is not permitted without ASHRAEs prior written permission.ASHRAE

20、STANDARDS COMMITTEE 20152016Douglass T. Reindl, Chair Keith I. Emerson Heather L. PlattRita M. Harrold, Vice-Chair Steven J. Emmerich David RobinJoseph R. Anderson Julie M. Ferguson Peter SimmondsJames D. Aswegan Roger L. Hedrick Dennis A. StankeNiels Bidstrup Srinivas Katipamula Wayne H. Stoppelmoo

21、r, Jr.Donald M. Brundage Rick A. Larson Jack H. ZarourJohn A. Clark Lawrence C. Markel Julia A. Keen, BOD ExOWaller S. Clements Arsen K. Melikov James K. Vallort, COJohn F. Dunlap Mark P. ModeraJames W. Earley, Jr. Cyrus H. NasseriStephanie C. Reiniche, Senior Manager of StandardsSPECIAL NOTEThis Am

22、erican National Standard (ANS) is a national voluntary consensus Standard developed under the auspices of ASHRAE. Consensus is defined by theAmerican National Standards Institute (ANSI), of which ASHRAE is a member and which has approved this Standard as an ANS, as “substantial agreementreached by d

23、irectly and materially affected interest categories. This signifies the concurrence of more than a simple majority, but not necessarily unanimity.Consensus requires that all views and objections be considered, and that an effort be made toward their resolution.” Compliance with this Standard isvolun

24、tary until and unless a legal jurisdiction makes compliance mandatory through legislation. ASHRAE obtains consensus through participation of its national and international members, associated societies, and public review.ASHRAE Standards are prepared by a Project Committee appointed specifically for

25、 the purpose of writing the Standard. The Project CommitteeChair and Vice-Chair must be members of ASHRAE; while other committee members may or may not be ASHRAE members, all must be technicallyqualified in the subject area of the Standard. Every effort is made to balance the concerned interests on

26、all Project Committees. The Senior Manager of Standards of ASHRAE should be contacted fora. interpretation of the contents of this Standard,b. participation in the next review of the Standard,c. offering constructive criticism for improving the Standard, ord. permission to reprint portions of the St

27、andard.DISCLAIMERASHRAE uses its best efforts to promulgate Standards and Guidelines for the benefit of the public in light of available information and accepted industrypractices. However, ASHRAE does not guarantee, certify, or assure the safety or performance of any products, components, or system

28、s tested, installed,or operated in accordance with ASHRAEs Standards or Guidelines or that any tests conducted under its Standards or Guidelines will be nonhazardous orfree from risk.ASHRAE INDUSTRIAL ADVERTISING POLICY ON STANDARDSASHRAE Standards and Guidelines are established to assist industry a

29、nd the public by offering a uniform method of testing for rating purposes, by suggestingsafe practices in designing and installing equipment, by providing proper definitions of this equipment, and by providing other information that may serve toguide the industry. The creation of ASHRAE Standards an

30、d Guidelines is determined by the need for them, and conformance to them is completely voluntary.In referring to this Standard or Guideline and in marking of equipment and in advertising, no claim shall be made, either stated or implied, that the product has been approved by ASHRAE. ASHRAE (www.ashr

31、ae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digital form is not permitted without ASHRAEs prior written permission.CONTENTSANSI/ASHRAE/IES 2015 Addenda Supplement to ANSI/ASHRAE/IES Standard 90.1-2013,Energy Standard for Buildings Except

32、Low-Rise Residential BuildingsSECTION PAGEAddendum a 2Addendum c 3Addendum d 4Addendum e 6Addendum g 7Addendum h 9Addendum j. 10Addendum k 11Addendum m. 12Addendum n 13Addendum o 18Addendum p 19Addendum q 23Addendum r 24Addendum s 25Addendum z 26Addendum aa 27Addendum ab 29Addendum ac 30Addendum ad

33、35Addendum ae 36Addendum ag 37Addendum ak 38Addendum bm. 40Addendum dx 76Informative Appendix A2015 Addenda Supplement to ANSI/ASHRAE/IES Standard 90.1-2013. 78NOTEApproved addenda, errata, or interpretations for this standard can be downloaded free of charge from the ASHRAEWeb site at www.ashrae.or

34、g/technology. 2015 ASHRAE1791Tullie Circle NE Atlanta, GA 30329 www.ashrae.org All rights reserved.ASHRAE is a registered trademark of the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.ANSI is a registered trademark of the American National Standards Institute. ASHRA

35、E (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digital form is not permitted without ASHRAEs prior written permission.2 ANSI/ASHRAE/IES Addendum a to ANSI/ASHRAE/IES Standard 90.1-2013(This foreword is not part of this standard. I

36、t is merelyinformative and does not contain requirements necessaryfor conformance to the standard. It has not been pro-cessed according to the ANSI requirements for a standardand may contain material that has not been subject topublic review or a consensus process. Unresolved objec-tors on informati

37、ve material are not offered the right toappeal at ASHRAE or ANSI.)FOREWORDAddendum a revises the definition of conditioned space inSection 3.2. The revised definition reflects the reduction inloads due to greater energy efficiency in Section 5.The revision to Section 5.1.2.1 makes the text consisten

38、twith the definitions in Section 3.2.Note: In this addendum, changes to the current standardare indicated in the text by underlining (for additions) andstrikethrough (for deletions) unless the instructions specifi-cally mention some other means of indicating the changes.space: an enclosed space with

39、in a building. The classifica-tions of spaces are as follows for the purpose of determiningbuilding envelope requirements:conditioned space: a cooled space, heated space,orindi-rectly conditioned space defined as follows:a. cooledspace:anenclosedspacewithinabuildingthatis cooled by a cooling system

40、whose sensible outputcapacity is greater than or equal to exceeds 5 3.4 Btu/hft2(15 10 W/m2) of floor area.b. heatedspace:anenclosedspacewithinabuildingthatis heated by a heating system whose output capacityrelative to the floor area is greater than or equal to thecriteria in Table 3.2.c. indirectly

41、 conditioned space: an enclosed spacewithin a building that is not a heated space or a cooledspace, which is heated or cooled indirectly by beingconnected to adjacent space(s) provided:1. the product of the U-factor(s) and surface area(s)of the space adjacent to connected space(s)exceeds the combine

42、d sum of the product of theU-factor(s) and surface area(s) of the spaceadjoining the outdoors, unconditioned spaces,and to or from semiheated spaces (e.g., corri-dors) or2. that air from heated or cooled spaces is intention-ally transferred (naturally or mechanically) intothe space at a rate exceedi

43、ng 3 ach (e.g., atria).semiheated space: an enclosed space within a buildingthat is heated by a heating system whose output capacityis greater than or equal to 3.4 Btu/hft2(10 W/m2)offloor area but is not a conditioned space.unconditioned space: an enclosed space within a build-ing that is not a con

44、ditioned space or a semiheated space.Crawlspaces, attics, and parking garages with natural ormechanical ventilation are not considered enclosedspaces.5.1.2.1 Separate exterior building envelope requirementsare specified for each of three categories of conditionedspace: (a) nonresidential conditioned

45、 space, (b) residentialconditioned space, and (c) semiheated space.Addendum a to Standard 90.1-2013Revise the definitions in Section 3.2 as follows; delete Table3.2 and replace with the following (I-P and SI units).TABLE 3.2 Heated Space Criteria (I-P Units)Climate Zone Heating Output (W/m2)1 152 15

46、3A, 3B 273C 214A, 4B 304C 245 366 427 488 57TABLE 3.2 Heated Space Criteria (SI Units)Climate Zone Heating Output (W/m2)1 152 153A, 3B 273C 214A, 4B 304C 245 366 427 488 57Revise Section 5.1.2.1 as follows. ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or tra

47、nsmission in either print or digital form is not permitted without ASHRAEs prior written permission.ANSI/ASHRAE/IES Addendum c to ANSI/ASHRAE/IES Standard 90.1-2013 3(This foreword is not part of this standard. It is merelyinformative and does not contain requirements necessaryfor conformance to the

48、 standard. It has not been pro-cessed according to the ANSI requirements for a standardand may contain material that has not been subject topublic review or a consensus process. Unresolved objec-tors on informative material are not offered the right toappeal at ASHRAE or ANSI.)FOREWORDSection 8.4.1

49、previously separated feeder conductorsfrom branch circuits when limiting voltage drop. By specify-ing the same combined voltage drop over the combination ofcomponents, this addendum reduces first costs in certain proj-ects while remaining neutral on energy costs.Note: In this addendum, changes to the current standardare indicated in the text by underlining (for additions) andstrikethrough (for deletions) unless the instructions specifi-cally mention some other means of indicating the changes.8.4 Mandatory Provisions8.4.1 Voltage DropException: Feeder conductors