ASME A112 19 1-2018 Enamelled cast iron and enamelled steel plumbing fixtures.pdf

1、ASME A112.19.1-2018/CSA B45.2-18Enamelled cast iron and enamelled steel plumbing fixturesLegal Notice for Harmonized Standard Jointly Developed by ASME and CSA GroupIntellectual property rights and ownershipAs between American Society of Mechanical Engineers (“ASME”) and Canadian Standards Associati

2、on (Operating as “CSA Group”) (collectively “ASME and CSA Group”) and the users of this document (whether it be in printed or electronic form), ASME and CSA Group are the joint owners of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the con

3、trary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. The unauthorized use, modification, copying, or disclosure of this document may violate laws that protect the i

4、ntellectual property of ASME and CSA Group and may give rise to a right in ASME and CSA Group to seek legal redress for such use, modification, copying, or disclosure. ASME and CSA Group reserve all intellectual property rights in this document.Disclaimer and exclusion of liabilityThis document is p

5、rovided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellec

6、tual property rights. ASME and CSA Group do not warrant the accuracy, completeness, or currency of any of the information published in this document. ASME and CSA Group make no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation.IN NO EV

7、ENT SHALL ASME AND CSA GROUP, THEIR RESPECTIVE VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL O

8、R CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EV

9、EN IF ASME OR CSA GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, ASME and CSA Group are not undertaking to render professional or other services for or on behalf of any person or entity or to perform any

10、duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and ASME and CSA Group accept no responsibility whatsoever arising in any way from any and all use of or r

11、eliance on the information contained in this document.ASME and CSA Group have no power, nor do they undertake, to enforce compliance with the contents of the standards or other documents they jointly publish.Authorized use of this documentThis document is being provided by ASME and CSA Group for inf

12、ormational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it; search and browse this document; and print this document if it is in PDF format.Li

13、mited copies of this document in print or paper form may be distributed only to persons who are authorized by ASME and CSA Group to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to alter this document in any way or remo

14、ve this Legal Notice from the attached standard; sell this document without authorization from ASME and CSA Group ; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any c

15、opies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Standards Update ServiceASME A112.19.1-2018/CSA B45.2-18July 2018Title: Enamelled cast iron an

16、d enamelled steel plumbing fixturesTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2425997.If you require assistance, please e-mail techsupportcsagroup

17、.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.ASME/CSA StandardASME A112.19.1-2018/CSA B45.2-18 Enamelled cast iron and enamelled steel plumbing fixturesA trademark of the Canadian Standards Association and

18、 CSA America Inc., operating as “CSA Group”Published in July 2018 by CSA Group A not-for-profit private sector organization178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R31-800-463-6727 416-747-4044Visit the CSA Group Online Store at shop.csa.caThe American Society of Mechanical Engineers (AS

19、ME) Three Park AvenueNew York, NY 10016-5990, USA1-800-843-2763Visit the ASME Online Store at www.asme.orgCommitment for AmendmentsThis Standard is issued jointly by the American Society of Mechanical Engineers (ASME) and the Canadian Standards Association (Operating as “CSA Group”). Amendments to t

20、his Standard will be made only after processing according to the Standards writing procedures of both ASME and CSA Group. The American Society of Mechanical Engineers (ASME) Three Park Avenue New York, NY 10016-5990 USA 1-800-843-2763 Visit the ASME Online Store at www.asme.orgPublished in June 2018

21、 by CSA Group A not-for-profit private sector organization 178 Rexdale Boulevard Toronto, Ontario, Canada M9W 1R3 1-800-463-6727 or 416-747-4044 Visit the CSA Group Online Store at shop.csa.caCopyright 2018 by The American Society of Mechanical Engineers (ASME)ISBN 978-1-4883-1308-0 2018 Canadian St

22、andards AssociationThis Standard is available for public review on a continuous basis. This provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public at large.All rights reserved. No part of this publication may be reproduced in any form whatsoe

23、ver without the prior permission of the publisher.ASME A112.19.1-2018/CSA B45.2-18 Enamelled cast iron and enamelled steel plumbing fixturesJuly 2018 2018 Canadian Standards Association 1ContentsASME A112 Standards Committee on Plumbing Materials and Equipment 3ASME A112.19.1 Project Team on Enamele

24、d Cast Iron Plumbing Fixtures 7CSA Technical Committee on Plumbing Fixtures 9CSA/ASME Harmonization Task Group on Plumbing Fixtures 14Preface 160 Introduction 181 Scope 182 Reference publications 193 Definitions 204 General requirements 224.1 General 224.1.1 Materials 224.1.2 Surface finish 224.1.3

25、Quality of work 224.1.4 Wall brackets 224.2 Cast iron thickness 224.3 Tolerances 224.3.1 General 224.3.2 Apron bathtubs 224.4 Enamel 234.4.1 General 234.4.2 Specular gloss 234.4.3 Reflectance 234.4.4 Enamel thickness 234.4.5 Surface treatments 234.5 Waste fitting openings, drainage, and overflows 23

26、4.5.1 Waste fitting openings and drainage 234.5.2 Overflows 244.6 Additional requirements for lavatories and sinks Openings and mounting surfaces for supply fittings 244.7 Additional requirements for bathtubs and shower bases 244.7.1 Minimum dimensions for bathtubs 244.7.2 Slope to the waste outlet

27、254.7.3 Flanges 254.7.4 Slip-resistant surfaces 254.8 Additional requirements for drinking fountains 254.9 Accessible design fixtures 25ASME A112.19.1-2018/CSA B45.2-18 Enamelled cast iron and enamelled steel plumbing fixturesJuly 2018 2018 Canadian Standards Association 25 Test methods 255.1 Acid r

28、esistance test 255.1.1 Procedure 255.1.2 Performance 265.2 Surface examination 265.2.1 Procedure 265.2.2 Performance 265.3 Warpage test 265.3.1 Procedure 265.3.2 Performance 265.4 Field-installed tiling-flange seal test 265.4.1 Procedure 265.4.2 Performance 275.5 Overflow test (lavatories and sinks)

29、 275.5.1 Procedure 275.5.2 Performance 275.6 Structural integrity tests for enamelled steel bathtubs, lavatories, and sinks 275.6.1 Bathtubs 275.6.2 Lavatories and sinks 295.6.3 Surface examination 306 Markings, packaging, and literature 306.1 General 306.2 Non-standard fixtures 306.3 Field-installe

30、d flanges 306.4 Packaging 31Annex A (informative) Unit conversion criteria 38ASME A112.19.1-2018/CSA B45.2-18 Enamelled cast iron and enamelled steel plumbing fixturesJuly 2018 2018 Canadian Standards Association 3ASME A112 Standards Committee on Plumbing Materials and EquipmentW. M. Smith American

31、Society of Plumbing Engineers, Montgomery, Alabama, USA ChairS. Rawalpindiwala Kohler Co., Kohler, Wisconsin, USA Vice-ChairM. R. Gibeault Kohler Co., Kohler, Wisconsin, USA Alternate to: S. RawalpindiwalaAlternateR. K. Adler City of San Jose, San Jose, California, USA J. A. Ballanco JB Engineering

32、however, they should not contain proprietary names or information.ASME procedures provide for reconsideration of any interpretation when or if additional information that might affect an interpretation is available. Further, persons aggrieved by an interpretation may appeal to the cognizant ASME Com

33、mittee.Interpretations are published on the ASME Web site under the Committee Pages at http:/www.asme.org/codes/ as they are issued.CSA Notes:1) Use of the singular does not exclude the plural (and vice versa) when the sense allows.2) Although the intended primary application of this Standard is sta

34、ted in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose.3) This publication was developed by consensus, which is defined by CSA Policy governing standardization Code of good practice for standardi

35、zation as “substantial agreement. Consensus implies much more than a simple majority, but not necessarily unanimity”. It is consistent with this definition that a member may be included in the Technical Committee list and yet not be in full agreement with all clauses of this Standard.4) This Standar

36、d is subject to review within five years from the date of publication. Suggestions for its improvement will be referred to the appropriate committee.5) To submit a request for interpretation of this Standard, please send the following information to inquiriescsagroup.org and include “Request for int

37、erpretation” in the subject line: a) define the problem, making reference to the specific clause, and, where appropriate, include an illustrative sketch;b) provide an explanation of circumstances surrounding the actual field condition; andc) where possible, phrase the request in such a way that a sp

38、ecific “yes” or “no” answer will address the issue.Committee interpretations are processed in accordance with the CSA Directives and guidelines governing standardization and are available on the Current Standards Activities page at standardsactivities.csa.ca.Attention is drawn to the possibility tha

39、t some of the elements of this Standard may be the subject of patent rights. CSA is not to be held responsible for identifying any or all such patent rights. Users of this Standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility

40、.ASME A112.19.1-2018/CSA B45.2-18 Enamelled cast iron and enamelled steel plumbing fixturesJuly 2018 2018 Canadian Standards Association 18ASME A112.19.1-2018/CSA B45.2-18Enamelled cast iron and enamelled steel plumbing fixtures0 Introduction0.1 This harmonized Standard was developed in response to

41、an industry request for a Standard for evaluation of plumbing fixtures that would be acceptable for use in both Canada and the United States. Harmonized standards for plumbing fixtures made of other materials are also available or under development.0.2 Harmonization activities for plumbing fixtures

42、standards were undertaken in 2004 by a Joint Harmonization Task Group (JHTG) on Plumbing Fixtures, in which the ASME and CSA plumbing fixtures committees were equally represented. The responsibility for procedural matters and final approval of technical content was assumed by technical committees at

43、 higher levels within each SDO.1 Scope1.1 This Standard covers enamelled cast iron and enamelled steel plumbing fixtures, and specifies requirements for materials, construction, performance, testing, and markings.1.2 This Standard covers the following plumbing fixtures:a) bathtubs;b) drinking founta

44、ins and water coolers;c) lavatories;d) shower bases; ande) sinks: i) bar sinks;ii) clinic sinks;iii) kitchen sinks;iv) laboratory sinks;v) laundry sinks;vi) service sinks; andvii) utility sinks.1.3 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged

45、 to satisfy in order to comply with the standard; “should” is used to express a recommendation or that ASME A112.19.1-2018/CSA B45.2-18 Enamelled cast iron and enamelled steel plumbing fixturesJuly 2018 2018 Canadian Standards Association 19which is advised but not required; “may” is used to express

46、 an option or that which is permissible within the limits of the standard; and “can” is used to express possibility or capability.Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory o

47、r informative material.Notes to tables and figures are considered part of the table or figure and may be written as requirements.Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.1.4 SI units are the units of record in Canada. In this Standard, t

48、he yard/pound units are shown in parentheses. The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard.All references to gallons are

49、 to U.S. gallons.For information on the unit conversion criteria used in this Standard, see Annex A.2 Reference publicationsThis Standard refers to the following publications, and where such reference is made, it shall be to the edition listed below, including all amendments published thereto.ASME (American Society of Mechanical Engineers)/CSA GroupASME A112.18.1-2012/ CSA B125.1-12 Plumbing supply fittingsASME A112.18.2-2015/ CSA B125.2-15 Plumbing waste fittingsASME A112.19.2-2018/CSA B45.1-18 Ceramic plumbing fixturesCSA GroupB125.3-12 Plumbing f