ASME A112 19 2-2018 Ceramic plumbing fixtures.pdf

1、ASME A112.19.2-2018/CSA B45.1-18Ceramic plumbing fixturesLegal Notice for Harmonized Standard Jointly Developed by ASME and CSA GroupIntellectual property rights and ownershipAs between American Society of Mechanical Engineers (“ASME”) and Canadian Standards Association (Operating as “CSA Group”) (c

2、ollectively “ASME and CSA Group”) and the users of this document (whether it be in printed or electronic form), ASME and CSA Group are the joint owners of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and t

3、rade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. The unauthorized use, modification, copying, or disclosure of this document may violate laws that protect the intellectual property of ASME and

4、 CSA Group and may give rise to a right in ASME and CSA Group to seek legal redress for such use, modification, copying, or disclosure. ASME and CSA Group reserve all intellectual property rights in this document.Disclaimer and exclusion of liabilityThis document is provided without any representati

5、ons, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. ASME and C

6、SA Group do not warrant the accuracy, completeness, or currency of any of the information published in this document. ASME and CSA Group make no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation.IN NO EVENT SHALL ASME AND CSA GROUP, TH

7、EIR RESPECTIVE VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST RE

8、VENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF ASME OR CSA GROUP HAVE BEE

9、N ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, ASME and CSA Group are not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entit

10、y to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and ASME and CSA Group accept no responsibility whatsoever arising in any way from any and all use of or reliance on the information conta

11、ined in this document.ASME and CSA Group have no power, nor do they undertake, to enforce compliance with the contents of the standards or other documents they jointly publish.Authorized use of this documentThis document is being provided by ASME and CSA Group for informational and non-commercial us

12、e only. The user of this document is authorized to do only the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in

13、 print or paper form may be distributed only to persons who are authorized by ASME and CSA Group to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the at

14、tached standard; sell this document without authorization from ASME and CSA Group ; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, an

15、d if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Standards Update ServiceASME A112.19.2-2018/CSA B45.1-18July 2018Title: Ceramic plumbing fixturesTo register for e-mail notifi

16、cation about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2425956.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at

17、www.csagroup.org/legal to find out how we protect your personal information.ASME/CSA StandardASME A112.19.2-2018/CSA B45.1-18 Ceramic plumbing fixturesA trademark of the Canadian Standards Association and CSA America Inc., operating as “CSA Group”Published in July 2018 by CSA Group A not-for-profit

18、private sector organization178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R31-800-463-6727 416-747-4044Visit the CSA Group Online Store at shop.csa.caThe American Society of Mechanical Engineers (ASME) Three Park AvenueNew York, NY 10016-5990, USA1-800-843-2763Visit the ASME Online Store at ww

19、w.asme.orgCommitment for AmendmentsThis Standard is issued jointly by the American Society of Mechanical Engineers (ASME) and the Canadian Standards Association (Operating as “CSA Group”). Amendments to this Standard will be made only after processing according to the Standards writing procedures of

20、 both ASME and CSA Group. The American Society of Mechanical Engineers (ASME) Three Park Avenue New York, NY 10016-5990 USA 1-800-843-2763 Visit the ASME Online Store at www.asme.orgPublished in June 2018 by CSA Group A not-for-profit private sector organization 178 Rexdale Boulevard Toronto, Ontari

21、o, Canada M9W 1R3 1-800-463-6727 or 416-747-4044 Visit the CSA Group Online Store at shop.csa.caCopyright 2018 by The American Society of Mechanical Engineers (ASME)ISBN 978-1-4883-1274-8 2018 Canadian Standards AssociationThis Standard is available for public review on a continuous basis. This prov

22、ides an opportunity for additional public input from industry, academia, regulatory agencies, and the public at large.All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.ASME A112.19.2-2018/CSA B45.1-18 Ceramic plumb

23、ing fixturesJuly 2018 2018 Canadian Standards Association 1ContentsASME A112 Standards Committee on Plumbing Materials and Equipment 6ASME A112.19.2 Project Team on Vitreous China Plumbing Fixtures 10CSA Technical Committee on Plumbing Fixtures 12CSA/ASME Harmonization Task Group on Plumbing Fixture

24、s 17Preface 191 Scope 212 Reference publications 223 Definitions and abbreviations 233.1 Definitions 233.2 Abbreviations 274 General requirements 284.1 Dimensions and tolerances 284.1.1 Thickness 284.1.2 Tolerances 284.2 Glazing 284.3 Waste fitting openings, drainage, and overflows 294.3.1 Openings

25、and drainage 294.3.2 Overflows 294.4 Off-the-floor plumbing fixture supports 294.5 Non-vitreous china plumbing fixtures 304.5.1 Glazing 304.5.2 Integral traps 304.6 Additional requirements for water closets 304.6.1 Outlet dimensions 304.6.2 Non-standard outlets 304.6.3 Bolt hole spacing 304.6.4 Roug

26、hing-in details 304.6.5 Seat-mounting holes 304.6.6 Rim profiles 304.6.7 Water surface dimensions 304.6.8 Trap diameter 304.6.9 Spuds 314.6.10 Rim heights 314.7 Additional requirements for urinals 314.7.1 Integral trap diameter 314.7.2 Dimensions 314.7.3 Spuds 314.7.4 Materials and construction 314.

27、7.5 Non-water-consuming urinals 31ASME A112.19.2-2018/CSA B45.1-18 Ceramic plumbing fixturesJuly 2018 2018 Canadian Standards Association 24.8 Additional requirements for lavatories, sinks, and bidets 314.8.1 Openings and mounting surfaces for supply fittings 314.8.2 Wall-mounted commercial lavatori

28、es and sinks 324.8.3 Spuds for clinic sinks 324.9 Additional requirements for bathtubs and shower bases 324.9.1 Minimum dimensions for bathtubs 324.9.2 Slope to the waste outlet 324.9.3 Flanges 324.10 Additional requirements for drinking fountains 334.11 Accessible design fixtures 335 Flushing devic

29、es used with fixtures 335.1 General 335.2 Gravity flush tanks 335.2.1 General 335.2.2 Fill valve opening diameter and location 335.2.3 Critical level 335.2.4 Low-profile gravity tanks 345.2.5 Water closet fill valve 345.2.6 Water closet tank capacity 345.3 Pressurized flushing devices 345.3.1 Genera

30、l 345.3.2 Low-profile tanks with pressurized flushing devices 345.4 Plastic water closet tanks 345.5 Electrical components of electro-hydraulic water closets 345.5.1 Pump motor and impeller 345.5.2 Jet hose 345.5.3 Electrical supply cords 355.5.4 Wiring harnesses and electrical controls 355.6 Dual-f

31、lush water closets 356 Tests Materials, finishes, structural integrity, and seals 356.1 Water absorption test 356.1.1 Test specimen 356.1.2 Specimen preparation 356.1.3 Procedure 356.1.4 Report 356.1.5 Performance 366.2 Crazing test 366.2.1 Test specimen 366.2.2 Procedure 366.2.3 Performance 366.3 S

32、urface examination 366.3.1 Procedure 366.3.2 Evaluation 366.3.3 Performance 376.3.4 Other fixtures 376.4 Warpage test 376.4.1 Procedure 37ASME A112.19.2-2018/CSA B45.1-18 Ceramic plumbing fixturesJuly 2018 2018 Canadian Standards Association 36.4.2 Performance 376.5 Field-installed tiling-flange sea

33、l test 376.5.1 Procedure 376.5.2 Performance 386.6 Overflow test (lavatories, sinks, and bidets) 386.6.1 Procedure 386.6.2 Performance 386.7 Structural integrity tests for all wall-mounted plumbing fixtures and thin-wall lavatories 386.7.1 All wall-mounted fixtures and thin-wall lavatories 386.7.2 W

34、all-mounted water closets 396.7.3 Wall-mounted and thin-wall lavatories 396.7.4 Wall-mounted urinals 396.8 Structural integrity test for bathtubs, shower bases, and non-vitreous service sinks 396.8.1 Apparatus 396.8.2 Procedure 406.8.3 Performance 406.9 Joint seal test 406.10 Auger test 406.10.1 Pro

35、cedure 406.10.2 Performance 406.11 Condensation-free (insulated) tank test 406.11.1 Procedure 406.11.2 Performance 417 Water closet tests 417.1 General 417.1.1 All tests 417.1.2 Gravity flush tank water closets 417.1.3 Flushometer tank, electro-hydraulic, or other pressurized flushing device water c

36、losets 427.1.4 Flushometer valve water closets 427.1.5 Procedures for standardizing the water supply system 427.1.6 Test medium 437.1.7 Reports 437.2 Trap seal depth determination test 437.2.1 Apparatus 437.2.2 Procedure 437.2.3 Report 437.2.4 Performance 437.3 Water consumption test 437.3.1 General

37、 437.3.2 Apparatus 447.3.3 Procedure 447.3.4 Report 447.3.5 Performance 447.4 Trap seal restoration test 447.4.1 Apparatus 447.4.2 Procedure 447.4.3 Report 457.4.4 Performance 45ASME A112.19.2-2018/CSA B45.1-18 Ceramic plumbing fixturesJuly 2018 2018 Canadian Standards Association 47.5 Granule and b

38、all test 457.5.1 Test media 457.5.2 Procedure 457.5.3 Report 457.5.4 Performance 467.6 Surface wash test 467.6.1 Test medium 467.6.2 Procedure 467.6.3 Report 467.6.4 Performance 467.7 Drain line transport characterization test 467.7.1 Test medium 467.7.2 Apparatus 467.7.3 Procedure 477.7.4 Report 47

39、7.7.5 Performance 477.8 Overflow test for gravity flush tanks 487.8.1 Apparatus 487.8.2 Procedure 487.8.3 Report 487.8.4 Performance 487.9 Waste extraction test 487.9.1 Apparatus 487.9.3 Procedure 507.9.4 Performance and report 507.9.5 Performance 507.10 Consistent water level test 517.10.1 Procedur

40、e 517.10.2 Performance 517.11 Fill valve shutoff integrity test with increased water pressure 517.11.1 Procedure 517.11.2 Performance 517.12 Adjustability test for tank-type gravity water closets with original equipment 517.12.1 Procedure 517.12.2 Report 527.12.3 Performance 527.13 Adjustability tes

41、t for tank-type gravity water closets with aftermarket closure seals 527.13.1 Procedure 527.13.2 Report 537.13.3 Performance 538 Urinal tests 538.1 General 538.2 Test apparatus and general instructions 548.3 Trap seal depth determination test 548.3.1 Apparatus 548.3.2 Procedure 548.3.3 Report 558.3.

42、4 Performance 55ASME A112.19.2-2018/CSA B45.1-18 Ceramic plumbing fixturesJuly 2018 2018 Canadian Standards Association58.4 Surface wash test 558.4.1 Test medium 558.4.2 Procedure 558.4.3 Report 558.4.4 Performance 558.5 Dye test 568.5.1 Test medium and apparatus 568.5.2 Procedure 568.5.3 Report 568

43、.5.4 Performance 568.6 Water consumption test 568.6.1 Apparatus 568.6.2 Procedure 568.6.3 Report 578.6.4 Performance 578.7 Tests for non-water-consuming urinals 579 Markings, packaging, and installation instructions and other literature 579.1 General 579.2 Non-standard fixtures 579.3 Additional mark

44、ings for water closets and urinals 589.3.1 Close-coupled water closets 589.3.2 Water consumption 589.3.3 Water level mark in gravity flush tank water closets 589.3.4 Water closet tank repair parts 589.4 Field-installed flanges 589.5 Packaging 589.5.1 General 589.5.2 Water closets and urinals 599.6 I

45、nstallation instructions and other literature 599.6.1 General 599.6.2 Water closets 599.6.3 Urinals 599.6.4 Field-installed flange kits 59Annex A (informative) Suggested formats for reporting test results 80Annex B (informative) Unit conversion criteria 86ASME A112.19.2-2018/CSA B45.1-18 Ceramic plu

46、mbing fixturesJuly 2018 2018 Canadian Standards Association 6ASME A112 Standards Committee on Plumbing Materials and EquipmentW. M. Smith American Society of Plumbing Engineers, Montgomery, Alabama, USA ChairS. Rawalpindiwala Kohler Co., Kohler, Wisconsin, USA Vice-ChairM. R. Gibeault Kohler Co., Ko

47、hler, Wisconsin, USA Alternate to: S. RawalpindiwalaAlternateR. K. Adler City of San Jose, San Jose, California, USA J. A. Ballanco JB Engineering b) the addition of the WaterSense test protocol, but allows both cased and uncased media;c) updated test pressures for urinals;d) an update to water cons

48、umption markings;e) an updated test medium size for the drain line characterization test, including the removal of the density requirement;f) an updated pressure requirement for the joint seal test;g) the addition of shower outlet dimensions;h) the warpage test has been amended for clarity;i) the fl

49、ange test has been amended to make it consistent with other standards; andj) other editorial changes were made for better clarification.This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard.This Standard was prepared by the ASME/CSA Joint Harmonization Task Group on Plumbing Fixtures, under the jurisdiction of the ASME Standards Committee on Plumbing Materials and Equipment and the CSA Technical Committee on Plumbing Fixtures. The CSA Technical Committee operates under the jurisdiction of the