ASME Y14 34-2008 Associated Lists《相关列表》.pdf

1、Associated ListsEngineering Drawing and Related Documentation PracticesAN AMERICAN NATIONAL STANDARDASME Y14.34-2008(Revision and Redesignation of ASME Y14.34M-1996)Copyright ASME International Provided by IHS under license with ASME Not for ResaleNo reproduction or networking permitted without lice

2、nse from IHS-,-,-ASME Y14.34ADOPTION NOTICEASME Y14.34, Associated Lists, was adopted on 1 August 2008 for use by the Department of Defense (DoD).Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, U.S. ArmyResearch, Development and Engineering Center (ARDEC

3、), ATTN: AMSRD-AAR-QES-E, Picatinny Arsenal, NJ07806-5000. Copies of this document may be purchased from The American Society of Mechanical Engineers(ASME), 22 Law Drive, P.O. Box 2900, Fairfield, NJ 07007-2900. http:/www.asme.org.Custodians: Adopting Activity:Army AR Army ARNavy SAAir Force 16 (Pro

4、jectDRPR-2008-005)Review Activities:Army CR, IE, MI, PT, TM2Navy AS, CG, CH, EC, MC, NP, TDAir Force 13, 99DLADHOSDSENSANSOther CM, MP, DC2NOTE: Theactivitieslistedabovewereinterestedinthisdocumentasofthedateofthisdocument.Sinceorganizationsandresponsibili-ties can change, you should verify the curr

5、ency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil.AMSC N/A AREA DRPRDISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Copyright ASME International Provided by IHS under license with ASME Not for ResaleNo reproduction or network

6、ing permitted without license from IHS-,-,-ASME Y14.34-2008(Revision and Redesignation of ASME Y14.34M-1996)Associated ListsEngineering Drawing and RelatedDocumentation PracticesAN AMERICAN NATIONAL STANDARDCopyright ASME International Provided by IHS under license with ASME Not for ResaleNo reprodu

7、ction or networking permitted without license from IHS-,-,-Date of Issuance: January 20, 2009This Standard will be revised when the Society approves the issuance of a new edition. There willbe no addenda or written interpretations of the requirements of this Standard issued to this edition.Periodica

8、lly certain actions of the ASME Y14 Committee may be published as Cases. Cases arepublished on the ASME Web site under the Committee Pages at http:/cstools.asme.org as they areissued.ASME is the registered trademark of The American Society of Mechanical Engineers.This code or standard was developed

9、under procedures accredited as meeting the criteria for American NationalStandards. The Standards Committee that approved the code or standard was balanced to assure that individuals fromcompetent and concerned interests have had an opportunity to participate. The proposed code or standard was madea

10、vailable for public review and comment that provides an opportunity for additional public input from industry, academia,regulatory agencies, and the public-at-large.ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.ASME does not take any position w

11、ith respect to the validity of any patent rights asserted in connection with anyitems mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability forinfringement of any applicable letters patent, nor assumes any such liability. Users of a code or standa

12、rd are expresslyadvised that determination of the validity of any such patent rights, and the risk of infringement of such rights, isentirely their own responsibility.Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted asgovernment or indu

13、stry endorsement of this code or standard.ASME accepts responsibility for only those interpretations of this document issued in accordance with the establishedASME procedures and policies, which precludes the issuance of interpretations by individuals.No part of this document may be reproduced in an

14、y form,in an electronic retrieval system or otherwise,without the prior written permission of the publisher.The American Society of Mechanical EngineersThree Park Avenue, New York, NY 10016-5990Copyright 2009 byTHE AMERICAN SOCIETY OF MECHANICAL ENGINEERSAll rights reservedPrinted in U.S.A.Copyright

15、 ASME International Provided by IHS under license with ASME Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-CONTENTSForeword ivCommittee Roster . vCorrespondence With the Y14 Committee viSummary of Changes vii1 Scope 12 Applicable Documents 13 Definitions . 14 Comm

16、on Requirements for Associated Lists 35 Parts List Preparation. 36 Application List Preparation . 47 Data List Preparation . 48 Index List Preparation 59 Wire List Preparation . 5Figures1 Separate List Heading . 62 Integral Parts List Graphic Sheet of Drawing 73 Integral Parts List Separate Sheet of

17、 Drawing 74 Parts List Column Entries . 85 Application List Column Entries . 106 Data List Column Entries 107 Index List Column Entries . 118 Wire List Column Entries 119A Separate Parts List Manually Generated Format . 129B Separate Parts List Digitally Generated Format 1310A Data List Manually Gen

18、erated Format . 1410B Separate Data List Digitally Generated Format 1511A Index List Manually Generated Format 1611B Separate Index List Digitally Generated Format . 1712A Application List Manually Generated Format 1812B Application List Digitally Generated Format . 1913A Wire List Manually Generate

19、d Format . 2013B Wire List Digitally Generated Format . 21iiiCopyright ASME International Provided by IHS under license with ASME Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-FOREWORDThis Standard establishes the requirements for associated lists and ties them t

20、ogether with theengineering drawing and related documentation practices in the Y14 series. It is not the intentofthis Standardtobe astand-alonedocument. Anaccurateperception ofassociatedlists practicesis derived by treating ASME Y14.34, ASME Y14.100, ASME Y14.24, and ASME Y14.35M as acomposite set.T

21、his Standard is a revision of ASME Y14.34M-1996, Associated Lists. Changes contained inthis revision are intended to improve standardization and harmonize practices and methodologybetween industry and government. See the Summary of Changes page for a list of revisions inthis edition.The successful r

22、evision of this Standard is attributed to the subcommittee members and theirrespective companies, and the department and agencies of the U.S. government.Suggestions for improvement of this Standard are welcome. They should be sent to The Ameri-can Society of Mechanical Engineers, Secretary, Y14 Stan

23、dards Committee, Three Park Avenue,New York, NY 10016-5990.This revision was approved as an American National Standard on July 29, 2008.ivCopyright ASME International Provided by IHS under license with ASME Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-ASME Y14 C

24、OMMITTEEEngineering Drawing and Related DocumentationPractices(The following is the roster of the Committee at the time of approval of this Standard.)STANDARDS COMMITTEE OFFICERSF. Bakos, Jr., ChairK. E. Wiegandt, Vice ChairC. J. Gomez, SecretarySTANDARDS COMMITTEE PERSONNELA. R. Anderson, Dimension

25、al Control Systems, Inc.F. Bakos, Jr., ConsultantJ. V. Burleigh, ConsultantD. E. Day, TEC-EASE, Inc.K. Dobert, UGS PLM SolutionsC. W. Ferguson, WM Education ServicesC. J. Gomez, The American Society of Mechanical EngineersB. A. Harding, Purdue UniversityD. H. Honsinger, ConsultantW. A. Kaba, Spirit

26、AeroSystems, Inc.K. S. King, BAE SystemsA. Krulikowski, Effective Training, Inc.P. J. McCuistion, Ohio UniversityJ. D. Meadows, James D. Meadows OrderDepartment:22LawDrive,P.O.Box 2300, Fairfield, NJ 07007-23002.2 United States Government DocumentsCataloging Handbook H4/H8, Commercial andGovernment

27、Entity (CAGE)Publisher: DLIS-VSS Customer Contact Center, DefenseLogistics Information Service, 74 Washington AvenueNorth, Battle Creek, MI 49017-308412.3 FiguresThefiguresinthisStandardareintendedonlyasillus-trations to aid the user in understanding the practicesdescribed in the text. In some cases

28、, figures show a levelof detail as needed for emphasis; in other cases, figureswere deliberately left incomplete to illustrate a conceptorfacetthereof.Theabsenceoffigureshasnobearingonthe applicability of the stated requirements or practice.3 DEFINITIONS3.1 Alphanumeric Arrangementalphanumeric arran

29、gement: an ordered grouping of sym-bols,numbers,andlettersusedtoformanidentification.3.2 Application Dataapplication data: the next assembly(ies), and the modelnumber, nomenclature, or equivalent designator of theassembled unit(s), of which a part or assembly is acomponent.3.3 Application List (AL)a

30、pplication list (AL):applicationdatapresentedinasepa-rate list (see Figs. 12A and 12B).3.4 Approvalapproval: an indication that the document meets require-ments for preparation and content (see Fig. 1).3.4.1 Approval Indicatorapproval indicator: any symbol adopted by the designactivity to indicate a

31、pproval (see ASME Y14.42).3.5 Associated Listassociated list: a tabulation of engineering informationpertaining to an item depicted on an engineering draw-ing or by a set of drawings, e.g., application list, datalist, index list, parts list, and wire list.3.6 Bulk Itemsbulk items: those constituents

32、 of an assembly or part,such as oil, wax, solder, cement, ink, damping fluid,grease, flux, welding rod, twine, or chain, that satisfyone or more of the following criteria:(a) the quantity required cannot not readily be prede-termined(b) the physical nature of the material is such that itis not adapt

33、able to pictorial representation(08)(08)Copyright ASME International Provided by IHS under license with ASME Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-ASME Y14.34-2008(c) the finished size is obtainable through use of suchtoolsasshears,pliers,orknives,without

34、furthermachin-ing operation(d) the final configuration is such that it can bedescribed in writing without the necessity of pictorialrepresentation (see ASME Y14.100).3.7 Commercial and Government Entity (CAGE) Codecommercial and government entity (CAGE) code: a five-character code that provides a un

35、ique activity identifierused by the government for activity identification. Thismethod of activity identification has also been widelyadopted by industry. Refer to Cataloging HandbookH4/H8 (see ASME Y14.100).3.8 Data List (DL)data list (DL): a tabulation of all engineering drawings,associated lists,

36、 specifications, standards, and subordi-nate data lists pertaining to the item(s) to which thedata list applies, and essential in-house documents nec-essary to meet the technical design disclosure require-ments, except for those in-house documents referencedparenthetically (see Figs. 10A and 10B).3.

37、9 Design Activitydesign activity: an organization that has, or has had,responsibility for the design of an item (see ASMEY14.100).3.9.1 Current Design Activitycurrent design activity: the design activity currentlyresponsible for the design of an item. This may be theoriginal design activity or a des

38、ign activity to which thedesign responsibility has been transferred (see ASMEY14.100).3.9.2 Original Design Activityoriginal design activity: the design activity originallyresponsible for the design and identification of an item,whose drawing number and activity identification isshown in the title b

39、lock of the drawings and associateddocuments (see ASME Y14.100).3.10 Design Activity Identification (DAI)design activity identification (DAI): the application of auniqueidentifierthatdistinguishesanactivityororgani-zation from another activity or organization. Examplesof activity identification incl

40、ude activity name, activityname and address, or CAGE code (see ASME Y14.100).3.11 Digital Datadigital data: data stored on a computer system thatemploys a display on which the user and the computerinteract to create or alter entities for the production oflayouts, drawings, numerical control tapes, o

41、r otherengineering data (see ASME Y14.100).23.12 Documentdocument: a term applicable to the specifications, draw-ings, lists, standards, pamphlets, reports, and printed,typewritten, or otherwise created information relatingto the design, procurement, manufacture, testing, oracceptance inspection of

42、items or services (see ASMEY14.100).3.13 Drawingdrawing: an engineering document or digital file(s) thatdiscloses, directly or by reference, the physical or func-tional requirements of an item by means of graphic ortextual presentations, or by combinations of both (seeASME Y14.100).3.14 Engineering

43、Dataengineering data: engineering documents such as draw-ings, associatedlists, accompanyingdocuments, specifi-cations, standards, or other information prepared orused by a design activity and relating to the design,manufacture, procurement, testing, or inspection ofitems (see ASME Y14.100).3.15 Fin

44、d Number or Item Numberfind number or item number: a reference number assignedto designate an item on the field of the drawing, inlieu of using the items part or identifying number. It isentered as a cross-reference to the line of the parts listwhere the items actual part or identifying number andde

45、scription are given.NOTE: Reference designations for electrical and electronic partsand equipment, in accordance with ASME Y14.44, may be usedas find numbers or item numbers.3.16 Flag Noteflag note: a note whose text is prefixed by a note identifi-cationenclosedwithinasymbol(flag).Thenoteiscross-ref

46、erenced to a specific area on a drawing or associatedlist by entering the flag at the point of application.3.17 Identification Cross-Reference Drawingidentification cross-reference drawing: an administrative-type drawing that assigns unique identifiers to providea cross-reference to the original inc

47、ompatible identifiers(see ASME Y14.24).3.18 Index List (IL)index list (IL): a tabulation of data lists and subordinateindex lists pertaining to the item(s) to which the indexlist applies (see Figs. 11A and 11B).3.19 Itemitem:anonspecifictermusedtodenoteanyunitorprod-uct, including materials, parts,

48、assemblies, equipment,accessories,andcomputersoftware(seeASMEY14.100).Copyright ASME International Provided by IHS under license with ASME Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-(08)ASME Y14.34-20083.20 Parts List (PL)parts list (PL):atabulationofallpartsa

49、ndbulkmaterialsused in the item(s), except those materials that supporta process and are not retained, such as cleaning solventsand masking materials.3.20.1 Integral Parts Listintegral parts list: a parts list prepared and revised aspart of an engineering drawing (see Fig. 4).3.20.2 Separate Parts Listseparate parts