ASTM A957 A957M-2015 Standard Specification for Investment Castings Steel and Alloy Common Requirements for General Industrial Use《一般工业用途的通用要求钢及合金熔模铸件的标准规格》.pdf

1、Designation: A957/A957M 15Standard Specification forInvestment Castings, Steel and Alloy, CommonRequirements, for General Industrial Use1This standard is issued under the fixed designation A957/A957M; the number immediately following the designation indicates the yearof original adoption or, in the

2、case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.A superscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope*1.1 This specification covers a group of requirements thatare mandatory for castings produc

3、ed by the investment castingprocess to meet the metallurgical requirements of the followingsteel casting specifications issued by ASTM.ASTM Designation Title of SpecificationA27/A27M Steel Castings, Carbon, for General Ap-plicationA128/A128M Steel Castings, Austenitic ManganeseA148/A148M Steel Casti

4、ngs, High-Strength, for Struc-tural PurposesA297/A297M Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat-Resistant, forGeneral ApplicationA447/A447M Steel Castings, Chromium-Nickel-Iron Al-loy (25-12 Class), for High-TemperatureServiceA494/A494M Castings, Nickel and Nickel AlloyA560/A560M

5、 Castings, Chromium-Nickel AlloyA732/A732M Castings, Investment, Carbon and LowAlloy Steel for General Application, andCobalt Alloy for High Strength at ElevatedTemperaturesA743/A743M Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion-Resistant, for GeneralApplicationA744/A744M Castings, Iron-

6、Chromium-Nickel, Corro-sion Resistant, for Severe ServiceA747/A747M Steel Castings, Stainless, PrecipitationHardeningA890/A890M Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex(Austenitic/Ferritic) for General Applica-tionA915/A915M Steel Castings, Carbon and Alloy, Chemi-cal Re

7、quirements Similar to StandardWrought GradesA958 Steel Castings, Carbon and Alloy, withTensile Requirements, Chemical Require-ments Similar to Standard WroughtGradesA1002 Castings, Nickel-Aluminum Ordered Alloy1.2 This specification also covers a group of supplementaryrequirements that may be applie

8、d to the above specifications asindicated therein. These are provided for use when additionaltesting or inspection is desired and apply only when specifiedindividually by the purchaser in the order.1.3 When investment castings are ordered, the requirementsstated in this specification form an integra

9、l part of the materialspecification. In cases of conflict, the requirements of thisspecification shall take precedence over the individual materialspecification requirements.1.4 The values stated in either SI units or inch-pound unitsare to be regarded separately as standard. The values stated ineac

10、h system may not be exact equivalents; therefore, eachsystem shall be used independently of the other. Combiningvalues from the two systems may result in non-conformancewith the standard.2. Referenced Documents2.1 ASTM Standards:2A27/A27M Specification for Steel Castings, Carbon, forGeneral Applicat

11、ionA128/A128M Specification for Steel Castings, AusteniticManganeseA148/A148M Specification for Steel Castings, HighStrength, for Structural PurposesA297/A297M Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant,for General ApplicationA370 Test Methods and Defini

12、tions for Mechanical Testingof Steel ProductsA380 Practice for Cleaning, Descaling, and Passivation ofStainless Steel Parts, Equipment, and SystemsA447/A447M Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-TemperatureServiceA488/A488M Practice for Steel Castings,

13、 Welding, Qualifi-cations of Procedures and PersonnelA494/A494M Specification for Castings, Nickel and NickelAlloyA560/A560M Specification for Castings, Chromium-NickelAlloy1This specification is under the jurisdiction of ASTM Committee A01 on Steel,Stainless Steel and Related Alloys and is the dire

14、ct responsibility of SubcommitteeA01.18 on Castings.Current edition approved March 1, 2015. Published March 2015. Originallyapproved in 1996. Last previous edition approved in 2014 as A957/A957M 14.DOI: 10.1520/A0957_A0957M-15.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orc

15、ontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.*A Summary of Changes section appears at the end of this standardCopyright ASTM International, 100 Barr Harbor Drive, PO Box C700, Wes

16、t Conshohocken, PA 19428-2959. United States1A609/A609M Practice for Castings, Carbon, Low-Alloy,and Martensitic Stainless Steel, Ultrasonic ExaminationThereofA732/A732M Specification for Castings, Investment, Car-bon and Low Alloy Steel for General Application, andCobalt Alloy for High Strength at

17、Elevated TemperaturesA743/A743M Specification for Castings, Iron-Chromium,Iron-Chromium-Nickel, Corrosion Resistant, for GeneralApplicationA744/A744M Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe ServiceA747/A747M Specification for Steel Castings, Stainless,Precip

18、itation HardeningA751 Test Methods, Practices, and Terminology for Chemi-cal Analysis of Steel ProductsA800/A800M Practice for Steel Casting, Austenitic Alloy,Estimating Ferrite Content ThereofA890/A890M Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex(Austenit

19、ic/Ferritic) for General ApplicationA903/A903M Specification for Steel Castings, Surface Ac-ceptance Standards, Magnetic Particle and Liquid Pen-etrant InspectionA915/A915M Specification for Steel Castings, Carbon, andAlloy, Chemical Requirements Similar to StandardWrought GradesA941 Terminology Rel

20、ating to Steel, Stainless Steel, RelatedAlloys, and FerroalloysA958 Specification for Steel Castings, Carbon and Alloy,with Tensile Requirements, Chemical Requirements Simi-lar to Standard Wrought GradesA967 Specification for Chemical Passivation Treatments forStainless Steel PartsA991/A991M Test Me

21、thod for Conducting TemperatureUniformity Surveys of Furnaces Used to Heat Treat SteelProductsA997 Practice for Investment Castings, Surface AcceptanceStandards, Visual ExaminationA1002 Specification for Castings, Nickel-Aluminum Or-dered AlloyA1058 Test Methods for Mechanical Testing of SteelProduc

22、tsMetricA1067 Specification for Test Coupons for Steel CastingsA1080 Practice for Hot Isostatic Pressing of Steel, StainlessSteel, and Related Alloy CastingsE29 Practice for Using Significant Digits in Test Data toDetermine Conformance with SpecificationsE94 Guide for Radiographic ExaminationE125 Re

23、ference Photographs for Magnetic Particle Indica-tions on Ferrous CastingsE165 Practice for Liquid Penetrant Examination for GeneralIndustryE186 Reference Radiographs for Heavy-Walled (2 to 412-in.(50.8 to 114-mm) Steel CastingsE192 Reference Radiographs of Investment Steel Castingsfor Aerospace App

24、licationsE280 Reference Radiographs for Heavy-Walled (412 to 12-in. (114 to 305-mm) Steel CastingsE340 Test Method for Macroetching Metals and AlloysE353 Test Methods for Chemical Analysis of Stainless,Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron AlloysE354 Test Methods for Chemi

25、cal Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron,Nickel, and Cobalt AlloysE446 Reference Radiographs for Steel Castings Up to 2 in.(50.8 mm) in ThicknessE709 Guide for Magnetic Particle TestingE2660 Digital Reference Images for Investment Steel Cast-ings for Aerospace A

26、pplications2.2 SAE Aerospace Recommended Practice:3ARP 1341 Determining Decarburization and Carburizationin Finished Parts of Carbon and Low-Alloy Steel3. Terminology3.1 Definitions:3.1.1 The definitions in Test Methods and Definitions A370,Test Methods, Practices, and Terminology A751, TerminologyA

27、941, and Test Methods A1058 are applicable to this specifi-cation and to those listed in 1.1.3.2 Definitions of Terms Specific to This Standard:3.2.1 investment casting, na metal casting that is producedin a mold obtained by investing (surrounding) an expendablepattern with a ceramic slurry that is

28、allowed to solidify. Theexpendable pattern may consist of wax, plastic, or othermaterial and is removed prior to filling the mold with liquidmetal.3.2.2 master heat, na quantity of metal processed in asingle furnace or refining vessel at one time in such a manneras to produce the desired composition

29、 and properties.3.2.3 sub-heat, na portion of a master heat remeltedwithout additional processing for pouring into castings. Syn-onyms: melt, production heat.4. Materials and Manufacture4.1 When the purchaser imposes the requirements of thisspecification, the manufacturer is responsible for complian

30、cewith the specification requirements during the production andprocessing of the casting by themselves and any of theirsubcontractors.4.2 Melting ProcessMaster heats shall be made by theelectric furnace process with or without separate refining suchas argon-oxygen-decarburization (AOD), vacuum-oxyge

31、n-degassing (VOD), vacuum-induction-melting (VIM), and soforth, unless otherwise specified in the individual specificationor agreed upon between the customer and producer. Masterheats may be used directly for producing castings or convertedinto ingot, bar, shot, or other suitable form, not including

32、 gatesand risers from casting production, for later remelting as asub-heat.4.3 Re-Melting ProcessSub-heats shall be produced frommaster heat metal in suitable batch sizes by electric induction3Available from Society of Automotive Engineers (SAE), 400 CommonwealthDr., Warrendale, PA 15096-0001, http:

33、/www.sae.org.A957/A957M 152furnace with or without atmosphere protection such as vacuumor inert gas unless otherwise specified in the individualspecification or agreed upon between the customer and pro-ducer. Revert (gates, sprues, risers, and rejected castings) shallnot be re-melted except in maste

34、r heats.4.4 Sampling:4.4.1 If castings are poured directly from one or moremaster heats, then the samples for chemical and other requiredtesting shall also be poured directly from each of the masterheats.4.4.2 If castings are poured from a sub-heat, then thesamples for chemical and other required te

35、sting shall also bepoured from a sub-heat of that same master heat, but notnecessarily from the same sub-heat as the castings. Thesub-heat used for the test samples shall be produced using thesame melting practices and additions as used to produce thecastings.4.4.3 Unless otherwise specified by the

36、purchaser, testspecimens may be taken from castings or from coupons castintegrally with the castings, in the same molds as the castings,or in separate molds.4.5 Heat Treatment:4.5.1 Castings shall be heat treated in the working zone of afurnace that has been surveyed in accordance with Test MethodA9

37、91/A991M.4.5.2 When castings are heat treated at temperatures above2000F (1100C), then the working zone shall have beenestablished by a survey performed at not more than 25F(15C) below nor more than 200F (110C) above the mini-mum heat treatment temperature specified for the grade. If aminimum heat t

38、reatment temperature is not specified for thegrade, then the survey temperature shall be not more than 50F(30C) below nor more than 175F (100C) above the furnaceset point used.4.5.3 The maximum variation in measured temperature asdetermined by the difference between the highest temperatureand the lo

39、west temperature shall be as agreed between thepurchaser and producer except that during production heattreatment, no portion of the furnace shall be below theminimum specified temperature nor above the maximumspecified temperature for the grade being processed.5. Chemical Composition5.1 Chemical An

40、alysisChemical analysis of materialscovered by this specification shall be in accordance with TestMethods, Practices, and Terminology A751.5.2 Heat AnalysisAn analysis of samples obtained inaccordance with 4.4 or Supplementary Requirement S20 asappropriate, shall be made by the manufacturer to deter

41、minethe percentages of the elements specified in the individualspecification for the grade being poured. When drillings areused, they shall be taken not less than116 in. 2 mm beneaththe surface. The chemical composition thus determined shallconform to the requirements in the individual specification

42、 forthe grade being poured.5.3 Product AnalysisA product analysis may be made bythe purchaser from material representing each master heat,sub-heat, lot, or casting. The analysis shall be made onrepresentative material. Samples for carbon analysis of carbonand alloy steel shall be taken no closer tha

43、n116 in. 2 mm toa cast surface, except that castings too thin for this shall beanalyzed on representative material. The chemical compositionthus determined shall meet the requirements specified in theapplicable specification for the grade involved, or shall besubject to rejection by the purchaser, e

44、xcept that the chemicalcomposition determined for carbon and low alloy steel castingsmay vary from the specified limits by the amounts shown inTable 1. The product analysis tolerances of Table 1 are notapplicable as acceptance criteria for heat analysis by thecasting manufacturer. When comparing pro

45、duct and heatanalysis for other than carbon and low alloy steels, thereproducibility Data R2, in Test Methods E353 or E354,asapplicable, shall be taken into consideration.5.4 Unspecified ElementsWhen chemical analysis for el-ements not specified for the grade ordered is desired, Supple-mentary Requi

46、rement S13 may be specified.NOTE 1All commercial metals contain small amounts of variouselements in addition to those that are specified. It is neither practical nornecessary to specify limits for every unspecified element that might bepresent, despite the fact that the presence of many of these ele

47、ments isoften routinely determined by the producer.5.5 Grade substitutionGrade substitution is not permitted.Grade substitution occurs when the material being suppliedTABLE 1 Product Analysis TolerancesElement Range, %ATolerancesB,COverMaximum or UnderMinimum Limit, %C upto0.65 0.03%CL+ 0.02above 0.

48、65 0.04Mn upto1 0.08%MnL+ 0.01above 1 0.09Si upto0.60 0.22%SiL 0.01above 0.60 0.15P all 0.13%PL+ 0.005S all 0.36%SL+ 0.001Ni upto2 0.10%NiL+ 0.03above 2 0.25Cr upto2 0.07%CrL+ 0.04above 2 0.18Mo upto0.6 0.04%MoL+ 0.03above 0.6 0.06V upto0.25 0.23%VL+ 0.004above 0.25 0.06W upto0.10 0.08%WL+ 0.02above

49、 0.10 0.02Cu upto0.15 0.18%CuL+ 0.02above 0.15 0.05Al up to 0.10 0.08 % AlL+ 0.02above 0.10 0.03AThe range denotes the composition limits up to which tolerances are computedby the equation, and above which the tolerances are given by a constant.BThe subscript L for the elements in each equation indicates that the limits of theelement specified by the applicable specification are to be inserted into theequation to calculate the tolerance for the upper limit and the lower limit (ifapplicable), respectively. Examples of computing tolerance