1、Designation: B 601 07Standard Classification forTemper Designations for Copper and Copper AlloysWrought and Cast1This standard is issued under the fixed designation B 601; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of
2、 last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the Department of Defense.1. Scope*1.1 This classification establishes te
3、mper designations forcopper and copper alloyswrought and cast. The temperdesignations are classified by the process or processes used inmanufacturing the product involved and its resulting proper-ties. It is not a specification of copper and copper alloys.1.2 The property requirements for the temper
4、s are given inthe applicable product specification.2. Referenced Documents2.1 ASTM Standards:2B 846 Terminology for Copper and Copper Alloys3. Terminology3.1 For terminology related to copper and copper alloys,refer to Terminology B 846.4. Significance and Use4.1 SignificanceThis classification esta
5、blishes an alpha-numeric code of the tempers of copper and copper alloyproducts.4.2 UseAn alphanumeric code establishes a system bywhich product tempers in specifications and published data aredesignated.4.2.1 The letters in the code identify the type of processused to produce the product temper. Fo
6、r example, “H” indi-cates a temper resulting from cold working.NOTE 1These letters are frequently the same as those used in tempersystems of other metal products.NOTE 2Undefined letters, used in prior temper systems and includedin this system for reference, are defined in Appendix X1.5. Classificati
7、on of Tempers5.1 Annealed Tempers, OTempers produced by annealingto meet mechanical property requirements.5.2 Annealed Tempers, with Grain Size Prescribed, OSTempers produced by annealing to meet standard or specialgrain size requirements.5.3 As-Manufactured Tempers, MTempers produced inthe product
8、by the primary manufacturing operations of cast-ing, or casting and hot working, and controlled by the methodsemployed in the operations.5.4 Cold-Worked Tempers, HTempers produced by con-trolled amounts of cold work, by manufacturing process, or byuse.5.5 Cold-Worked (Drawn), and Stress-Relieved Tem
9、pers,HRTempers produced by controlled amounts of cold workfollowed by stress relief.5.5.1 Order-Strengthening Tempers, HTTempers pro-duced by controlled amounts of cold work followed by athermal treatment to produce order strengthening.5.5.2 End Annealed Temper, HETemper produced by coldwork followe
10、d by anneal of the ends of the product.5.6 Heat-Treated Tempers, TTempers that are based onsolution heat treatments followed by rapid cooling, with orwithout subsequent cold working or thermal treatments.5.6.1 Quench-Hardened Tempers, TQTempers producedby quench-hardening treatments.5.6.2 Solution H
11、eat-Treated Temper, TBTempers pro-duced by solution heat-treating precipitation hardenable orspinodal hardenable alloys.5.6.3 Solution Heat-Treated and Cold-Worked Tempers,TDTempers produced by controlled amounts of cold work ofsolution heat-treated precipitation hardenable or spinodal hard-enable a
12、lloys.5.6.4 Precipitation Heat-Treated Temper, TFTempersproduced by Solution Heat-Treatment and precipitation heattreatment of precipitation-hardenable alloys.1This classification is under the jurisdiction of ASTM Committee B05 onCopper and Copper Alloys and is the direct responsibility of Subcommit
13、tee B05.91on Editorial and Publications.Current edition approved April 1, 2007. Published May 2007. Originallyapproved in 1974. Last previous edition approved in 2002 as B 601 02.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org.
14、 For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.1*A Summary of Changes section appears at the end of this standard.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.5
15、.6.5 Spinodal Heat Treated Temper, TXTempers pro-duced by Solution Heat-Treatment and spinodal heat treatmentof spinodal hardenable alloys.5.6.6 Cold-Worked and Precipitation Heat-Treated Tem-pers, THTempers produced in alloys that have been solutionheat treated, cold worked, and precipitation heat
16、treated.5.6.7 Cold-Worked and Spinodal Heat-Treated Tempers,TSTempers produced in alloys that have been solution heattreated, cold worked, and spinodal heat treated.5.6.8 Mill-Hardened Tempers, TMTempers of heat-treated materials as supplied by the mill resulting fromcombinations of cold work and pr
17、ecipitation heat treatment orspinodal heat treatment.5.6.9 Precipitation Heat-Treated or Spinodal Heat-Treatedand Cold-Worked Tempers, TLTempers produced by coldworking the precipitation heat-treated or spinodal heat-treatedalloys.5.6.10 Precipitation Heat-Treated or Spinodal Heat-Treated, Cold-Work
18、ed, and Thermal Stress-Relieved Tempers,TRTempers produced in the cold-worked precipitation heat-treated or spinodal heat-treated alloys by thermal stress relief.5.7 Tempers of Welded Tubes, W(Welded tubes are pro-duced from strip of various tempers and essentially have thetemper of the strip except
19、 in the heat-affected zone.)5.7.1 Tube, As-Welded Tempers, WMTempers that resultfrom forming and welding when producing tube.5.7.2 Tube, Welded and Annealed Temper, WOTemperthat results from forming, welding, and annealing when pro-ducing tube.5.7.3 Tube, Welded and Cold-Worked Tempers, WHTempers th
20、at result from forming, welding, and cold workingwhen producing tube.5.7.4 Tube, Welded, Cold-Worked and Stress-Relieved Tem-pers, WRTempers that result from forming, welding, coldworking, and stress relieving when producing tube.5.7.5 Tube, Welded, and Fully Finished Tempers, O, OS,HTempers that re
21、sult from both annealing a welded andcold-worked tube, or cold working, a welded cold-worked andannealed tube. With these treatments, the weld area has beentransformed into a wrought structure, and the usual temperdesignations apply.6. Temper Designation Codes and Names6.1 Annealed Tempers, O:6.1.1
22、Annealed to Meet Mechanical Properties, O:Temper Codes Temper NamesO10 Cast and Annealed (Homogenized)O11 As Cast and Precipitation Heat TreatedO20 Hot Forged and AnnealedO25 Hot Rolled and AnnealedO30 Hot Extruded and AnnealedO31 Hot Extruded and Precipitation Heat TreatedO32 Hot Extruded and Tempe
23、r AnnealedO40 Hot Pierced and AnnealedO50 Light AnnealO60 Soft AnnealO61 AnnealedO65 Drawing AnnealO68 Deep Drawing AnnealO70 Dead Soft AnnealO80 Annealed to Temper18 HardO81 Annealed to Temper14 HardO82 Annealed to Temper12 Hard6.1.2 Annealed Tempers, with Grain Size PrescribedOSTemper Codes Temper
24、 Designations NominalAvg Grain Size, mmOS005 0.005OS010 0.010OS015 0.015OS025 0.025OS035 0.035OS045 0.045OS050 0.050OS060 0.060OS065 0.065OS070 0.070OS100 0.100OS120 0.120OS150 0.150OS200 0.2006.2 Cold-Worked Tempers, H:6.2.1 Cold-Worked Tempers to Meet Standard RequirementsBased on Cold Rolling or
25、Cold Drawing, H:Temper Codes Temper NamesH0018 HardH0114 HardH0212 HardH0334 HardH04 HardH06 Extra HardH08 SpringH10 Extra SpringH12 Special SpringH13 Ultra SpringH14 Super Spring6.2.2 Cold-Worked Tempers to Meet Standard RequirementsBased on Temper Names Applicable to Particular Products, H:Temper
26、Codes Temper NamesH50 Hot Extruded and DrawnH52 Hot Pierced and DrawnH55 Light Drawn, Light Cold-WorkedH58 Drawn General PurposeH60 Cold Heading, FormingH63 RivetH64 ScrewH66 BoltH70 BendingH80 Hard DrawnH85 Medium Hard-Drawn ElectricalWireH86 Hard-Drawn Electrical WireH90 As-finned6.3 Cold-Worked T
27、empers with Added Treatments:6.3.1 Cold Worked and Stress Relieved, HR:B601072Temper Codes Temper NamesHR0114 Hard and Stress RelievedHR0212 Hard and Stress RelievedHR04 Hard and Stress RelievedHR06 Extra Hard and Stress RelievedHR08 Spring and Stress RelievedHR10 Extra Spring and Stress RelievedHR1
28、2 Special Spring and Stress RelievedHR20 As-finned and Stress RelievedHR50 Drawn and Stress Relieved6.3.2 Cold Rolled and Order Strengthened, HT:Temper Codes Temper NamesHT04 Hard Temper and TreatedHT08 Spring Temper and Treated6.3.3 Hard Drawn End Annealed, HE:Temper Codes Temper NameHE80 Hard Draw
29、n and End Annealed6.4 As-Manufactured Tempers, M:Temper Codes Temper NamesM01 As Sand CastM02 As Centrifugal CastM03 As Plaster CastM04 As Pressure Die CastM05 As Permanent Mold CastM06 As Investment CastM07 As Continuous CastM10 As Hot ForgedAir CooledM11 As Hot ForgedQuenchedM20 As Hot RolledM25 A
30、s Hot Rolled and RerolledM30 As Hot ExtrudedM40 As Hot PiercedM45 As Hot Pierced and Rerolled6.5 Heat-Treated Tempers, T:6.5.1 Quench Hardened, TQ:Temper Codes Temper NamesTQ00 Quench HardenedTQ30 Quench Hardened and TemperedTQ50 Quenched Hardened and Temper AnnealedTQ55 Quench Hardened and Temper A
31、nnealed, ColdDrawn and Stress RelievedTQ75 Interrupted Quench6.5.2 Solution Heat Treated, TB:Temper Codes Temper NameTB00 Solution Heat Treated (A)6.5.3 Solution Heat Treated and Cold Worked, TD:Temper Codes Temper NamesTD00 SolutionHeat Treatedand ColdWorked:18HardTD01 SolutionHeat Treatedand ColdW
32、orked:14Hard (14 H)TD02 SolutionHeat Treatedand ColdWorked:12Hard (12 H)TD03 SolutionHeat Treatedand ColdWorked:34Hard (34 H)TD04 SolutionHeat Treatedand ColdWorked: Hard(H)6.5.4 Solution Heat Treated and Precipitation Heat Treated,TF:Temper Codes Temper NameTF00 Precipitation Hardened (AT)TF01 Prec
33、ipitation Heat-Treated PlateLowHardness (ATLH)TF02 Precipitation Heat-Treated PlateHighHardness (ATHH)6.5.5 Solution Heat Treated and Spinodal Heat Treated, TX:Temper Codes Temper NameTX00 Spinodal Hardened (AT)6.5.6 Solution Heat Treated, Cold Worked, and Precipita-tion Heat Treated, TH:Temper Code
34、s Temper NamesTH0114 Hard and Precipitation Heat Treated (14 HT)TH0212 Hard and Precipitation Heat Treated (12 HT)TH0334 Hard and Precipitation Heat Treated (34 HT)TH04 Hard and Precipitation Heat Treated (HT)6.5.7 Cold-Worked Tempers and Spinodal Heat Treated toMeet Standard Requirements Based on C
35、old Rolling or ColdDrawing, TS:Temper Codes Temper NamesTS0018 Hard and Spinodal Hardened (18 TS)TS0114 Hard and Spinodal Hardened (14 TS)TS0212 Hard and Spinodal Hardened (12 TS)TS0334 Hard and Spinodal Hardened (34 TS)TS04 Hard and Spinodal HardenedTS06 Extra Hard and Spinodal HardenedTS08 Spring
36、and Spinodal HardenedTS10 Extra Spring and Spinodal HardenedB601073TS12 Special Spring and Spinodal HardenedTS13 Ultra Spring and Spinodal HardenedTS14 Super Spring and Spinodal Hardened6.5.8 Mill Hardened, TM:Temper Codes Manufacturing DesignationsTM00 AMTM0114 HMTM0212 HMTM0334 HMTM04 HMTM05 SHMTM
37、06 XHMTM08 XHMS6.5.9 Precipitation Heat Treated or Spinodal Heat Treatedand Cold Worked, TL:Temper Codes Temper NamesTL00 Precipitation Heat Treated or Spinodal HeatTreated and18 HardTL01 Precipitation Heat Treated or Spinodal HeatTreated and14 HardTL02 Precipitation Heat Treated or Spinodal HeatTre
38、ated and12 HardTL04 Precipitation Heat Treated or Spinodal HeatTreated and HardTL08 Precipitation Heat Treated or Spinodal HeatTreated and SpringTL10 Precipitation Heat Treated or Spinodal HeatTreated and Extra Spring6.5.10 Precipitation Heat Treated or Spinodal Heat Treated,Cold Worked, and Thermal
39、 Stress Relieved, TR:Temper Codes Temper NamesTR01 Precipitation Heat Treated or Spinodal Heat Treated,14 Hard and Stress RelievedTR02 Precipitation Heat Treated or Spinodal Heat Treated,12 Hard and Stress RelievedTR04 Precipitation Heat Treated or Spinodal Heat Treated,Hard and Stress Relieved6.6 T
40、empers of Welded Tube, W:6.6.1 As-Welded, WM:Temper Codes Temper NamesWM50 As-Welded from Annealed StripWM00 As-Welded from18 Hard StripWM01 As-Welded from14 Hard StripWM02 As-Welded from12 Hard StripWM03 As-Welded from34 Hard StripWM04 As-Welded from Hard StripWM06 As-Welded from Extra Hard StripWM
41、08 As-Welded from Spring StripWM10 As-Welded from Extra Spring StripWM15 As-Welded from Annealed Strip, Thermal StressRelievedWM20 As-Welded from18 Hard Strip, Thermal Stress RelievedWM21 As-Welded from14 Hard Strip, Thermal Stress RelievedWM22 As-Welded from12 Hard Strip, Thermal Stress RelievedWM2
42、4 As-Welded from 3/4 Hard Strip, Thermal Stress Relieved6.6.2 Welded Tube and Annealed, WO:Temper Codes Temper NamesWO50 Welded and Light AnnealedWO60 Welded and Soft AnnealedWO61 Welded and Annealed6.6.3 Welded Tube and Light Cold-Worked, WC:Temper NameWC55 Welded and Light Cold-Worked6.6.4 Welded
43、Tube and Cold Drawn, WH:Temper Codes Temper NamesWH00 Welded and Drawn: Eighth HardWH01 Welded and Drawn: Quarter HardWH02 Welded and Drawn: Half HardWH03 Welded and Drawn: Three Quarter HardWH04 Welded and Drawn: HardWH06 Welded and Drawn: Extra HardWH55 Welded and Cold Reduced or Light DrawnWH58 W
44、elded and Cold Reduced or Drawn, GeneralPurposeWH80 Welded and Reduced or Hard Drawn6.6.5 Welded Tube, Cold Drawn, and Stress Relieved, WR:Temper Codes Temper NamesWR00 Welded, Drawn, and Stress Relieved from: Eighth HardWR01 Welded, Drawn, and Stress Relieved from: Quarter HardWR02 Welded, Drawn, a
45、nd Stress Relieved from: Half HardWR03 Welded, Drawn, and Stress Relieved from: ThreeQuarter HardWR04 Welded, Drawn, and Stress Relieved from: HardWR06 Welded, Drawn, and Stress Relieved from: Extra Hard6.6.6 Welded Tube, Fully Finished, O, OS, H:6.6.6.1 Fully Finished Tube, Annealed to Meet Propert
46、yRequirements:Temper Codes Temper NamesO temper designation; tempercodes; temper namesB601074APPENDIX(Nonmandatory Information)X1. DATA (See Section 4, Note 2.)X1.1 For information associated with B 601 tempers, seeTable X1.1.SUMMARY OF CHANGESCommittee B05 has identified the location of selected ch
47、anges to this standard since the last issue (B 601 - 02)that may impact the use of this standard:(1) Temper WM24 was added to 6.6.1(2) Temper HR20 name was corrected to include “and StressRelieved” in 6.3.1.(3) Temper codes and temper names (in Section 6) werecoordinated with classification definiti
48、ons (in Section 5).(4) Added Appendix X1.ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and th
49、e riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, w
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1