ASTM C119-2016 Standard Terminology Relating to Dimension Stone《有关规格石料的标准术语》.pdf

1、Designation: C119 16Standard Terminology Relating toDimension Stone1This standard is issued under the fixed designation C119; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indica

2、tes the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the U.S. Department of Defense.INTRODUCTIONDimension stone, as used here, is natural stone that has been selected and fa

3、bricated to specific sizesor shapes, with or without one or more mechanically dressed or finished surfaces, for use as buildingfacing, curbing, paving stone, monuments and memorials, and various industrial products. The termdimension stone is in contradistinction to crushed and broken stone, such as

4、 is used for aggregate,roadstone, fill, or chemical raw materials. Because all stone is a natural material, the definitionexcludes all manmade materials that simulate stone. In common practice, some dimension stones arereinforced, filled, or surface treated.Terms used in definitions and nomenclature

5、 shall be interpreted in accordance with commonlyaccepted scientific and technical terms of the geological sciences except as otherwise specificallynoted.Examples of such exceptions are the broader commercial definitions of granite and marble, whichhave become well established in the dimension stone

6、 industry and trade. Definitions and termsincluded in these definitions have been formulated in accordance with common industrial usage wherethis is not in conflict with current scientific usage.GENERAL TERMSanchorin general, a metal shape inserted into a slot or holein the stone that provides for t

7、he transfer of loads from thestone to the building structure, either directly or through anintermediate structure.anchoragethe system consisting of stone, anchor and pri-mary structure, secondary structure or back-up preventinglateral movement of the stone.arristhe junction of two planes of the same

8、 stone forming anexternal edge.ashlar(1) a squared block of building stone; (2) a masonryof such stones; (3) a thin-dressed rectangle of stone forfacing of walls (often called ashlar veneer).bearing checka slot, generally not continuous, cut into theback or bed of dimension stone to accommodate a su

9、pport-ing angle or clip (see Fig. 1.)building stonenatural rock of adequate quality to be quar-ried and cut as dimension stone as it exists in nature, as usedin the construction industry.chipan irregularly shaped fragment dislodged from a stonesurface.claddingnonload-bearing stone used as the facing

10、 materialin wall construction that contains other materials.copingdimension stone used as the top course of a masonrywall, often sloped to shed water.cracka partial break in the stone (see fracture, microcrack,seam).cubic stockin general, a thick dimension stone unit which isnot precisely defined in

11、 terms of thickness for every kind ofstone, particularly for limestone and sandstone. For marbleor granite, cubic stock is a unit that is greater than 50 mm inthickness. For limestone, cubic stock is a unit that is greaterthan 75 mm to 100 mm in thickness, and for sandstone, aunit that is greater th

12、an 150 mm to 200 mm in thickness. (Incontrast, see thin stone.)cut stonestone fabricated to specific dimensions.1This terminology is under the jurisdiction of ASTM Committee C18 onDimension Stone and is the direct responsibility of Subcommittee C18.91 onNomenclature and Definitions.Current edition a

13、pproved May 1, 2016. Published May 2016. Originallyapproved in 1926. Last previous edition approved in 2014 as C119 141. DOI:10.1520/C0119-16.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States1dimension stonenatural stone that has been s

14、elected andfabricated to specific sizes or shapes.DISCUSSIONThe term dimension stone is in contradistinction tocrushed and broken stone, such as is used for aggregate, roadstone, fill,or chemical raw materials. In common practice, some dimension stonesare reinforced, filled, or surface treated.dress

15、ed stoneSee cut stone, finished stone.durabilitythe measure of the ability of dimension stone toendure and to maintain its essential and distinctive charac-teristics of strength, resistance to decay, and appearance.Durability is based on the length of time that a stone canmaintain its innate charact

16、eristics in use. This time will varydepending on the environment, the use, and the finish of thestone in question (for example, outdoor versus indoor use).dry seama natural separation that has not been filled orbonded.fabricationwhen applied to dimension stone, any of theprocesses involved in changi

17、ng a raw stone piece to its finalend use form. This includes, but is not limited to cutting,splitting, grinding, drilling, or face-finishing.fading (slate)a slate that has a significant color changewithin the first year of exposure to weather, often the resultof chemical alteration of the iron miner

18、als.finished stonedimension stone with one or more mechani-cally exposed surfaces.fillingthe application of materials, often cements or syntheticresins, into natural voids in a stone during fabrication.fissurea naturally occurring separation which may or maynot affect the performance of the stone.fl

19、agstonenominally flat pieces of stone generally furnishedin irregular shapes with broken edges, typically used forpaving.fleuri-cut (cross-cut), adjdescribes stone that is cut parallelto the natural veining.flooringstone used as in interior pedestrian wearing surface.fracturea complete break in the

20、stone (see crack,microcrack, seam).freestonea stone having little or no preferential direction ofsplitting which may be cut freely in any direction withoutfracture or splitting.grain(1) a distinguishable rock constituent which itself hasa distinct identity, for example, a mineral crystal, an oolith,

21、a rock fragment (in sedimentary rocks), or clast.(2) a direction in a rock body along which it is more easilybroken, split, or cut. See rift.granularcomposed of particles visible to the unaided eye.For sedimentary stone, the predominant particle distributionis less than 4 mm in size.hysteresisthe re

22、sidual strain in stone after the stress causingsuch strain is changed.installationthe process of assembling dimension stone into astructure.kerf(1) a slot, either local or continuous, cut into the edge ofa stone, typically with a saw blade, for insertion of anchors.(2) the width of a cut when sawing

23、 through stone blocks orjointing slabs. (See Fig. 2.)laminationwhen applied to the processing of dimensionstone, refers to the adhesive bonding of multiple layers ofstone, or stone to other materials.linera small block of stone secured to the rear face of adimension stone panel with pins and adhesiv

24、e for thepurpose of providing a concealed horizontal bearing surface(see Fig. 3a and 3b in C1242).microcracka crack too small to be seen with the unaided eye(see crack, fracture, seam).microfissurea fissure that cannot be seen with the unaidedeye.monumental stonerock of adequate quality to be quarri

25、edand cut as dimension stone as it exists in nature, as used inthe monument and memorial industry.FIG. 1 Bearing CheckFIG. 2 KerfsC119 162open seamsunfilled fissures or naturally occurring cracks instone.panelcut stone with face dimensions large in relation to itsthickness, for placement in a buildi

26、ng structure or frameassembly.pavingstone used in an interior pedestrian wearing surfaceas in patios, walkways, driveways, and the like. (Seeflooring)pitssmall depressions, voids or pinholes in stone, especiallyon a finished surface.polished finisha surface that has high luster and strongreflection

27、of incident light.processingthe work involved in transforming quarry blocksinto dimension stone, including sawing, drilling, grinding,honing, polishing, carving, and all other operations neces-sary for installation.rebated kerfA kerf that includes a second cut at 90 degreesto the kerf axis to accomm

28、odate the anchor configuration andprevent the anchor from interfering with movement capabil-ity at the stone joint (see Fig. 3).resinationa cosmetic enhancement to stone slabs containingpits, fissures, cracks or other surface irregularities in whichan adhesive resin of epoxy, polyester, or acrylic b

29、ase hasbeen applied to the slab face and allowed to cure prior to thepolishing of the slab.ribbonin some slate, narrow bands of contrasting color orappearance differing in some degree in chemical composi-tion from the main body.rift(1) a consistent direction or trend in a rock body alongwhich the ro

30、ck is most easily split or broken.(2) The grain orientation in stone, particularly in sedimen-tary stones, showing more or less clearly how the stone wasoriginally bedded, and with or without color or grain-sizechanges or voids.rocka naturally occurring, consolidated aggregation of oneor more minera

31、ls constituting the crust of the Earth.rustication (or reveal)a continuous groove cut within theface or along the edge of a dimension stone panel, usuallyfor the purpose of visually imitating or accentuating a jointlocation (see Fig. 4).samplea small part or quantity of stone, usually a slab,panel,

32、or ashlar, that is cut from a larger block of stone.seama naturally filled or bonded feature in the stone, such asa streak or a vein, which may or may not adversely affect thestrength of a stone (see crack, fracture, microcrack).shaped stonedimension stone processed by carving,grinding, sawing, or o

33、ther means into specific nonplanarconfigurations.shop drawingswhen applied to dimension stone, a highlydetailed drawing that shows the net dimensions, jointdimensions, anchor locations and orientations, of the dimen-sion stone and the relationship with the other buildingmaterials being used.slaba pi

34、ece of stone produced by shaving or splitting in thefirst milling or quarrying operation. A slab has two parallelsurfaces.snipthe area of a stone surface from which a chip has beendislodged.sound stonestone which is free of cracks, fissures, or otherphysical defects.spalls(1) fragments or chips from

35、 a piece of dimensionstone. (2) waste stone usually of small size from thequarrying and milling of dimension limestone.FIG. 3 Rebated Kerf FIG. 4 RusticationC119 163specifying authorityparty requiring testing of dimensionstone material.specimenan individual piece of stone that is cut from asample to

36、 be used for physical or mechanical testing.stickinga method of repairing the butt edge of a brokenpiece of stone, generally done with dowels, cements, orepoxies. The pieces are “stuck” together, thus “sticking”.stonea naturally-consolidated substance formed fromminerals, geologically synonymous wit

37、h rock (see rock, seedimension stone if selected or fabricated).DISCUSSIONThis term does not include any manufactured stone-likeproducts or manmade materials that simulate stone.texture(1) a modified appearance of dimension stone resultingfrom one or several mechanical surface treatments. Untreateds

38、tone surfaces have textural characteristics described under (2).(2) that aspect of the physical appearance of a rock that isdetermined by size, shape, and mutual relations of the compo-nent grains or crystals. Textures related to dimension stoneinclude equigranular (grains of approximately the same

39、size);inequigranular (grains of markedly unequal sizes); porphyritic(see Note 2 under Granite Group); interlocking (in whichgrains with irregular boundaries interlock by mutual penetra-tion); interlocking and porphyritic textures are characteristic ofgranites and marbles; clastic (naturally cemented

40、 fragmentalgrains but without mosaic or interlocking relations; this textureis typical of sandstones and some limestones); mosaic (closelypacked grains with smooth to moderately irregular, noninter-locking mutual boundaries); granoblastic (a megascopicallygranular mosaic texture in which the grains

41、are tightly com-pacted and the minerals are dominantly equidimensional andpresent irregular mutual boundaries; mosaic and granoblastictextures are characteristic of metamorphic rocks).thermal hysteresisthe permanent, incremental deformationof certain stones due to thermal cycling, usually associated

42、with loss of strength.thin stone/thin veneera cladding under 50 mm (2-in.) thick.tilea thin modular stone unit.unfading (slate)a slate that shows no significant colorchange within the first year of exposure.vein-cut, adjdescribes stone that is cut perpendicular to thenatural veining.veiningthe prese

43、nce in an otherwise homogeneous stone ofbands, streaks or irregular bodies of a contrasting color orappearance, and frequently having a different mineralogicalcomposition to the predominant material. “Veining” does notapply to gneiss, commercial granite types, and slate (seeribbon).veneera nonload-b

44、earing facing of stone attached to abacking for the purpose of ornamentation, protection, orinsulation.DISCUSSIONVeneer shall support no vertical load other than its ownweight and possibly the vertical dead load of veneer above.walls, veneeredSee veneer.waxingthe practice of filling minor surface vo

45、ids in stonewith certain polyester compounds, cabinetmakers wax, ormelted shellac. (It does not refer to the application of pastewax to make the surface shinier.)wearthe removal of material or impairment of surface finishthrough friction or impact.DISCUSSIONWear is an artificial process. The rate of

46、 wear may beaffected by chemical action.weatheringnatural alteration by either chemical or mechani-cal processes due to the action of constituents of theatmosphere, surface water or ground water, or to temperaturechange.DISCUSSIONChanges by weathering are not necessarily undesirableor harmful; rathe

47、r they may enhance the texture and color of the stone.STONE FINISHESBY FAMILYEvery material used in construction has a finish or surface;dimension stone has a plethora of finishes. This section de-scribes common finishes and classifies them into a numberof families by relief or roughness. The finish

48、es in each fam-ily are also arranged from the least relief to the most relief.Stone finishes are a complex matter for a number of rea-sons. New manufacturing or finishing methods or variationsor combinations of other methods of finishing stone are con-tinually being developed. Stone finish names som

49、etimesoverlap or are variations of other finishes.Finish options for any kind of stone vary by the geologiccategory of the stone (whether igneous, metamorphic, orsedimentary) and the unique combination of geological orphysical properties of the stone type. This means that anyparticular finish cannot be put on every type of stone (seeApplicability of Finishes for Various Stone Types Table inGuide C1528 for Selection of Dimension Stone for ExteriorUse). The individual definitions are sometimes nonspecific