ASTM C1547-2002 Standard Classification for Fusion-Cast Refractory Blocks and Shapes《熔铸耐火砖和型材标准分类》.pdf

1、Designation: C 1547 02Standard Classification forFusion-Cast Refractory Blocks and Shapes1This standard is issued under the fixed designation C 1547; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A numb

2、er in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This classification covers commercial fusion-cast refrac-tory blocks and shapes. Its purpose is to set forth the varioustypes and classes

3、of these materials according to their miner-alogical compositions. These compositions are important todetermining their suitability for use in specified applications.This standard is not intended to cover commercial fused grainsor beads.1.2 This standard does not purport to address all of thesafety

4、concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory requirements prior to use.2. Referenced Documents2.1 ASTM Standards:C 1118 Guide for Selecting Componen

5、ts for WavelengthDispersive X-ray Fluorescence (XRF) Systems2E 1479 Practice for Describing and Specifying InductivelyCoupled Plasma Atomic Emission Spectrometers22.2 Other Document:“A Practical Guide for the Preparation of Specimens forX-Ray Fluorescence and X-Ray Diffraction Analysis,”Victor E. Bu

6、hrke, Ron Jenkins and Deane K. Smith, eds.,John Wiley aluminosilicate; AZS; brick; chrome; classifi-cation; fusion cast; magnesia-chrome; refractories; zirconiaASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this stan

7、dard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be revie

8、wed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsibl

9、e technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Con

10、shohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).TABLE 1 Classificatio

11、n of Fused Alumina Refractories by Soda(Na2O) and Beta-Alumina ContentClass Soda Content (wt%) b-Alumina Content (vol%)Fused a-Alumina 95Fused b9-Alumina 4.5 (8 MgO) 95 as b9 (NaMg2Al15O25)TABLE 2 Classification of Fused Alumina-Zirconia-Silica (AZS)and Fused Zirconia Refractories by Zirconia Conten

12、tClass Zirconia Content (wt%) Zirconia Content (vol%)AZS 21 19-23 18.5-22.5AZS 33 31-34 30.5-33.5AZS 36 34.5-37.5 34-37AZS 40 38-41 37.5-41Zirconia 90 90TABLE 3 Classification of Fused Aluminosilicate Refractories byAlumina and Zirconia ContentClass Alumina Content (wt%) Alumina:Silica RatioMullite-

13、Corundum 67 3.6Mullite-Corundum-ZrO267 (3 Zirconia) 3.6TABLE 4 Classification of Fused Chrome-ContainingRefractories by Chromia (Cr2O3) Content and Mineral FormClass Chromia Content Mineral FormChrome 25 25-29-Alumina-Chrome Chromite spinel and Al2O3-Cr2O3solid solutions (ss.)-AZS-Chromia (AZSC) Al2

14、O3-Cr2O3ss.Chrome 70 70-77 Cr2O3-Al2O3ss. and Chromite spinelChrome 80 80-85 Cr2O3-Al2O3ss. and Chromite spinelTABLE 5 Classification of Magnesia-Containing Refractories byTypes and Content of MgO and SpinelClass Spinel Content (vol%) MgO Content (vol%)Magnesia-Spinel(46-50 wt% MgO)65-75 (as MgAl2O4) 25-35 (as MgO)Magnesia-Chromite(18-22 wt% Cr2O3)37-43 (as chromite spinel) 48-56 (as Mg1-xFexO)C1547022