ImageVerifierCode 换一换
格式:PDF , 页数:4 ,大小:72.69KB ,
资源ID:466899      下载积分:10000 积分
快捷下载
登录下载
邮箱/手机:
温馨提示:
快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。 如填写123,账号就是123,密码也是123。
特别说明:
请自助下载,系统不会自动发送文件的哦; 如果您已付费,想二次下载,请登录后访问:我的下载记录
支付方式: 支付宝扫码支付 微信扫码支付   
验证码:   换一换

加入VIP,免费下载
 

温馨提示:由于个人手机设置不同,如果发现不能下载,请复制以下地址【http://www.mydoc123.com/d-466899.html】到电脑端继续下载(重复下载不扣费)。

已注册用户请登录:
账号:
密码:
验证码:   换一换
  忘记密码?
三方登录: 微信登录  

下载须知

1: 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。
2: 试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。
3: 文件的所有权益归上传用户所有。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 本站仅提供交流平台,并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

版权提示 | 免责声明

本文(ASTM C511-2013 Standard Specification for Mixing Rooms Moist Cabinets Moist Rooms and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes《水硬水泥和混凝土试验用搅拌室、湿气箱、.pdf)为本站会员(syndromehi216)主动上传,麦多课文库仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文库(发送邮件至master@mydoc123.com或直接QQ联系客服),我们立即给予删除!

ASTM C511-2013 Standard Specification for Mixing Rooms Moist Cabinets Moist Rooms and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes《水硬水泥和混凝土试验用搅拌室、湿气箱、.pdf

1、Designation: C511 09C511 13Standard Specification forMixing Rooms, Moist Cabinets, Moist Rooms, and WaterStorage Tanks Used in the Testing of Hydraulic Cementsand Concretes1This standard is issued under the fixed designation C511; the number immediately following the designation indicates the year o

2、foriginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope*1.1 This specification includes requirements for mixing rooms

3、 where paste and mortar specimens are prepared; and for moistcabinets, moist rooms, and water storage tanks where paste, mortar, and concrete specimens are stored.1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.Values in S

4、I units shall be obtained by measurement in SI units or by appropriate conversion, using the Rules for Conversion androunding given in Standard IEEE/ASTM SI 10, of measurements made in other units.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its u

5、se. It is the responsibilityof the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatorylimitations prior to use.2. Referenced Documents2.1 ASTM Standards:2C51 Terminology Relating to Lime and Limestone (as used by the Industry)E77 T

6、est Method for Inspection and Verification of ThermometersIEEE/ASTM SI 10 Standard for Use of the International System of Units (SI): The Modern Metric System3. Terminology3.1 Definitions:3.1.1 mixing room, na room with controlled temperature and relative humidity where cement paste and mortar speci

7、mens areprepared.3.1.2 moist cabinet, na compartmented storage facility of moderate dimensions with controlled temperature and relativehumidity.3.1.3 moist room, na “walk-in” storage facility with controlled temperature and relative humidity, commonly called a fogroom when the prescribed relative hu

8、midity is achieved by the atomization of water.4. Requirements for Cement Mixing Rooms4.1 The temperature of the air in the vicinity of the mixing slab, molds, and base plates shall be maintained at 23.0 6 4.0 Cand at a relative humidity of not less than 50 %.4.2 The temperature of the mixing water

9、used to prepare cement paste and mortar specimens shall be 23.0 6 2.0 C.5. Temperature Measuring Devices5.1 Reference Temperature Measuring Deviceused to verify the temperature recorder, must be accurate and readable to 0.5C. A copy of the certificate or report which verifies the accuracy shall be a

10、vailable in the laboratory.1 This specification is under the jurisdiction of ASTM Committee C01 on Cement and is the direct responsibility of Subcommittee C01.95 on Coordination of Standards.Current edition approved June 1, 2009Dec. 1, 2013. Published July 2009January 2014. Originally approved in 19

11、68. Last previous edition approved in 20062009 asC51106.09. DOI: 10.1520/C0511-09.10.1520/C0511-13.2 For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at serviceastm.org. For Annual Book of ASTM Standardsvolume information, refer to the standards Docu

12、ment Summary page on the ASTM website.This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Becauseit may not be technically possible to adequately depict all changes accurately, ASTM r

13、ecommends that users consult prior editions as appropriate. In all cases only the current versionof the standard as published by ASTM is to be considered the official document.*A Summary of Changes section appears at the end of this standardCopyright ASTM International, 100 Barr Harbor Drive, PO Box

14、 C700, West Conshohocken, PA 19428-2959. United States1NOTE 1The ice-point method described in Test Method E77 may be used to ensure that no damage to the reference thermometer has occurred duringshipping.5.2 Temperature Recordershall record temperatures every 15 min or less and shall be accurate an

15、d readable to 1 C. The datafrom the recorder shall be evaluated at a minimum of once each week. A record of this evaluation documenting the date checked,a confirmation that the data is within the required temperature range, and the name of the individual performing this evaluationshall be maintained

16、 in the laboratory. (Note 2)NOTE 2This requirement may be satisfied by an initialed and dated temperature recorder chart. Brief changes in the temperature due to door openingsshould be ignored.5.2.1 The temperature recorder shall be verified at least every six months or whenever there is a question

17、of accuracy.5.2.1.1 For moist cabinets and rooms, position the reference temperature measuring device in a readable position in air as nearas practical to the temperature recorder probe. Keep the door closed for at least 5 min prior to taking readings. Record thetemperature readings of both the temp

18、erature recorder and the reference temperature measuring device. When taking thesereadings, the reference temperature measuring device shall remain in the moist cabinet or room and read immediately upon openingthe door.5.2.1.2 For water storage tanks, position the reference temperature measuring dev

19、ice in a readable position in water as near aspractical to the temperature recorder probe. Without removing the reference temperature measuring device from the water, recordthe temperature readings of both the temperature recorder and the reference temperature measuring device after the temperatures

20、have stabilized.5.2.1.3 Verify the accuracy of the temperature recorder by comparing the reading of the temperature recorder with that of thereference temperature measuring device during the normal operation of the moist cabinet, moist room or water storage tanks. Ifthe difference between the temper

21、ature readings is greater than 1 C, the temperature recorder shall be adjusted to within 0.5 Cof the reference temperature measuring device.6. Requirements for Moist Cabinets and Moist Rooms6.1 GeneralExcept during those times when specimens are being placed into or removed from storage, maintain th

22、eatmosphere in a moist cabinet or moist room at a temperature of 23.0 6 2.0 C and a relative humidity of not less than 95 %.Maintain atmospheric conditions within a moist cabinet or moist room such that test specimens in storage are saturated withmoisture to the degree needed to ensure that the expo

23、sed surfaces of all specimens in storage both look moist and feel moist (SeeNote 5). Equip all moist cabinets and moist rooms with a temperature recorder. The use of humidity recording devices is optional.Keep shelves on which fresh specimens are placed level.6.1.1 The air temperature inside the moi

24、st cabinet or moist room shall be controlled with provisions made for heating or cooling,or both, as may be necessary. This shall be accomplished in one of two ways:6.1.1.1 Thermostatically control the air temperature within the moist cabinet or moist room when surrounding space is notconditioned. I

25、n this case the sensing element for the controls shall be located inside the moist cabinet or moist room.6.1.1.2 Thermostatically control the space surrounding the moist cabinet or moist room and manually control the temperaturewithin the moist cabinet or moist room.6.1.2 In either of the preceding

26、cases, the laboratory shall demonstrate the ability of the controls to maintain the requiredtemperature in the moist cabinet or moist room over an extended period of time. Data from the temperature recorder that indicatesthat the temperatures are within the temperature limits specified in 6.1 shall

27、be required as evidence of this ability.6.2 Moist CabinetsAmoist cabinet shall be constructed of durable materials and the doors shall be tight-fitting. The specifiedrelative humidity shall be maintained by the use of one or more fog sprays, water sprays, or curtains of water on the inner wallsthat

28、are so directed that the discharge will collect in a pool at or near the bottom of the moist storage section.C511 1326.3 Moist Rooms:6.3.1 GeneralThe walls of a moist room shall be constructed of durable materials, and all openings shall be provided withtight-fitting doors or windows (Note 3). The s

29、pecified relative humidity may be maintained in any convenient and suitable manner(Note 4).NOTE 3Well insulated walls will substantially help maintain necessary conditions.NOTE 4A fog spray found suitable for this purpose is shown in Fig. 1.6.3.2 Moist Rooms Used in Cement TestingDurable shelving th

30、at is properly shielded to prevent droplets of water from fallingon the surfaces of freshly molded specimens shall be available within each moist room.6.3.3 Moist Rooms Used in Concrete TestingMaintain atmospheric conditions within each moist room such that testspecimens in storage both look moist a

31、nd feel moist (See Note 5). Do not expose specimens to dripping or running water.NOTE 5Maintenance of adequate water spray(s) and adequate spray distribution in the moist room will result in stored specimens looking and feelingmoist and will maintain the required humidity. Inadequate numbers of spra

32、y nozzles, partially obstructed spray nozzles, or disturbances in the moist airsystem such as open doors, air-conditioning or heating drafts, or overly crowded shelf space may result in relative dry spots. Specimen surface textureand age can influence the surface appearance and should be considered

33、when specimens in localized areas do not look and feel moist.7. Requirements for Water Storage Tanks7.1 GeneralTanks shall be constructed of non-corroding materials. Maintain storage water temperature at 23.0 6 2.0 C,except for those times when specimens are being placed into or removed from storage

34、, or tank maintenance is being performed.7.1.1 Tank Temperature ControlsProvision for automatic control of water temperature at 23.0 6 2.0 C shall be made wherea tank is located in a room not having temperature controlled within the specified range and in any other instance where difficultyin mainta

35、ining temperatures within the specified range is encountered. With the exception of water storage tanks located in a moistroom or moist cabinet, all water storage tanks shall be equipped with a temperature recorder with its sensing element in the storagewater. For the purpose of temperature recordin

36、g, a group of water storage tanks may be considered one tank if the following threeconditions are met: (1) all the tanks are interconnected with tubing that allows the water to flow between the tanks, (2) some meansof circulation is provided between tanks, and (3) temperature variation between the t

37、anks must not exceed 1.0 C when checkedand recorded weekly.7.2 GeneralTank Storage WaterTanks shall be constructed of non-corroding materials. Provision for automatic control ofwater temperature at 23.0 6 2.0 C shall be made where a tank is located in a room not having temperature controlled within

38、thatrange and in any other instance where difficulty in maintaining temperatures within the specified range is encountered. With theexception of water storage tanks located in a moist room or moist cabinet, all water storage tanks shall be equipped with atemperature recorder with its sensing element

39、 in the storage water. For the purpose of temperature recording, a group of waterstorage tanks may be considered one tank if the following three conditions are met: (1) all the tanks are interconnected with tubingthat allows the water to flow between the tanks, (2) some means of circulation is provi

40、ded between tanks, and (3) temperaturevariation between the tanks must not exceed 1.0 C when checked and recorded weekly. The water in a storage tank shall besaturated with calcium hydroxide to prevent leaching of calcium hydroxide from the specimens (Note 6). Water not saturated withcalcium hydroxi

41、de (high-calcium hydrated lime) may affect test results due to leaching of lime from the test specimens and shallnot be used in storage tanks. To maintain saturation with calcium hydroxide, excess calcium hydroxide shall be present. For thepurposes of lime saturation to prevent leaching, lime means

42、high-calcium hydrated lime, not calcium carbonate (limestone)seeNOTE 1Cut three horizontal air slots around circumference of hollow sphere using a 0.20 mm thick diamond lapidary saw covering 120 to 150 eachand spaced approximately 5 mm apart.Air passing through these slots strikes the water (which i

43、s flowing over the outer surface of the sphere) to producea spray.FIG. 1 Example of a Fog Spray for Maintaining Relative Humidity in Moist Rooms (Full Scale)C511 133Terminology C51. The water in the storage tank shall be thoroughly stirred at intervals not to exceed one month to help replacecalcium

44、ions that have depleted. Tanks shall be cleaned and refilled with water containing 3 g/L of calcium hydroxide at intervalsnot to exceed 24 months (Note 7).NOTE 6pH is not a reliable indicator of lime saturation in storage tank water since severe reductions in dissolved calcium ions can occur before

45、pHvalues are significantly reduced.NOTE 7The 3 g/L level is intended to provide a quantity of calcium hydroxide approximately two times that required for initial saturation.7.2.1 Do not use continuously running fresh water or demineralized water in storage tanks because it may affect test results du

46、eto excessive leaching. A closed system, circulating the saturated lime water between or among storage tanks, may be used.7.2 Do not use continuously running fresh water or demineralized water in storage tanks because it may effect test results dueto excessive leaching. A closed system, circulating

47、the saturated lime water between or among storage tanks, may be used.8. Keywords8.1 cement paste; concrete; mixing room; moist cabinets; moist rooms; mortar; water storage tanksSUMMARY OF CHANGESCommittee C01 has identified the location of selected changes to this specificationstandard since the las

48、tissue,issue C51106,(C51109) that may impact the use of this specification.standard. (Approved Dec. 1,2013June 1, 2009).)(1) Revised 6.1.(1) Revised Section 7.(2) Deleted old 6.1.1 and renumbered subsequent sections(3) Revised 6.3.3.(4) Added new Note 5 and renumbered subsequent notes.ASTM Internati

49、onal takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn.Your comments are invited either for revision o

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1