[计算机类试卷]微软认证70-215模拟试卷4及答案与解析.doc

1、微软认证 70-215模拟试卷 4及答案与解析 1 You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers. You want to install Windows 2000 Server on a new computer. You want the

2、new computer to act as domain controller in the existing domain. What should you do? （ A） On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server. （ B） On

3、 the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain contr

4、ollers. （ C） Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows

5、 NT domain. Restart the Windows NT PDC on the network and demote it to a BDC. （ D） Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in

6、 the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC. 2 You are installing Windows 2000 Server on a multiprocessor computer. The manufacturer has provided a customized Hardware abstraction layer (HAL) to use

7、with the computer. The customized HAL is on a floppy disk. You want to install the customized HAL designed for the computer. What should you do? （ A） During the text mode portion of the Windows 2000 setup, install the customized HAL. （ B） After the text mode portion of Windows 2000 Setup is complete

8、, use the Recovery Console to copy the customized HAL to the system32 folder on the boot partition, and then continue Windows 2000 Setup （ C） After the text mode portion of windows 2000 Setup is complete, use the Emergency Repair process to replace the existing HAL with the customized HAL, and then

9、continue the windows 2000 Setup. （ D） After the Windows 2000 Setup is complete, use Device Manager to scan for Hardware changes. When prompted, install the customized HAL. 3 You are the network administrator for Ezonexam. The network includes a Windows 2000 Server computer that contains a single 36-

10、GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 4 GB in size and contains the operating system files. Partition D is 32 GB in size and contains user data that is updated frequently. Both partitions are formatted as NTFS. Both partitions are backed up to a

11、 tape every evening at 11:00 P.M.You have a current Emergency Repair Disk (ERD) for the computer, and Recovery Console is installed on the computer. One day at2:00 P.M., the server fails. You attempt to restart the computer, but you receive the following error message: “Boot disk or operating system

12、 not found.“ You use Recovery Console to discover that the files on partition C are corrupted. You want to recover the server from the failure as quickly as possible. You also want to recover as much user data as possible. What should you do? （ A） Start the computer by using a Windows 2000 Server co

13、mpact disc. Select the Repair option in Setup. （ B） Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk. （ C） Use a Windows 2000 Server boot floppy disk to start the computer. Replace the corrupted files on

14、 partition C by copying them from the Emergency Repair Disk. （ D） Boot to the Recovery Console. Copy any files that have changed since 11:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server. 4 You are the administra

15、tor of a Windows 2000 Server computer at Blue sky Airlines. You onfigure a server named print10.marketing.blueskyairlines.local as a print server at the Los Angeles site. You create and share a variety of printers on the server for use by employees in the arketing.blueskyairlines.local domain. You w

16、ant to review the configured properties of all the shared printers on the rint10.marketing.blueskyairlines.local server. You want to perform this review from a Windows 2000 Professional computer at theLondon site of Blue sky Airlines. What should you do? （ A） Use your web browser to connect to http:

17、/print10.marketing.blueskyairlines.local/printers. （ B） Use your web browser to connect to http:/print10.blueskyairlines.local/printers. （ C） Run the net viewprint 10 command. （ D） Run the net viewprint command. 5 One of the file servers in the domain is a Windows 2000 Server computer named Ezonexa

18、mfiles.Ezonexamfiles contains a shared folder named Accounting, which is used to store data for the companys accounts payable department.The permissions on the Accounting folder are configured as shown in the following table. Mr. King is an employee in the operations department. He uses a Windows 20

19、00 Professional client computer. His manager requests that King be granted access to the files in the Accounting folder.You add Kings user account to the AcctPay domain local group, but he still cannot access the files in the Accounting folder.You need to ensure that King can access the files. What

20、should you do? （ A） Instruct King to log off his computer and log on again. （ B） Move Kings user account to the same Active Directory organizational unit (OU) as Ezonexamfiles. （ C） Modify the NTFS permissions on the Accounting folder to grant King Full Control permissions. （ D） Modify the NTFS perm

21、issions on the Accounting folder to grant the AcctPay domain local group Full Control permission. 6 You are the administrator of a Windows 2000 Server computer. A folder named HR-Data on the system partition of the server is shared on the network as HR-Data. The owner of the HR-Data folder is Admini

22、strators. The shared permissions and NTFS permissions are shown in the following table. Share permissions: Everyone: FULL Control NTFS permissions Domain Admins: Read Katrin: Full Control Katrin creates a file in the HR-Data folder. She sets the NTFS permissions for the file to list only herself on

23、the access control list, with Full Control permission. Katrin then leaves on vacation and cannot be contacted. Later, you discover that the file contains sensitive information and must be removed from the server as soon as possible. You want to delete the file without modifying any of the permission

24、s for other files in the HR-Data folder. You want your actions to have least possible impact on users who may be using other files in the HR-Data folder. You want to use the minimum amount of authority necessary to delete the file. What should you do? （ A） Grant yourself Full Control permission for

25、only the HR-data folder and not its subobjects. Delete the file. Then remove Full Control permission for HR-Data folder. （ B） Take ownership of the HR-Data folder. When prompted, take ownership of the existing files. Grant yourself Full Control permission for the file. Delete the file. （ C） Take own

26、ership of the file. Grant yourself Modify permission for the file. Delete the file. （ D） Grant yourself Modify permission for the HR-Data folder and its subobjects. Delete the file. Then remove Modify permission for the HR-Data folder. 7 You are the network administrator for E. You need to upgrade a

27、 computer from Windows NT Server 4.0 to Windows 2000 server. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the installation of the Windows 2000 Server operating system. During the text portion

28、of the installation, you receive the following error message: “Stop 0x00000078 Inaccessible_boot_device.“ You want to successfully upgrade the computer. What should you do? (Each answer presents part of the solution. Choose two) （ A） Start the computer by using a DOS disk and run FDISK. （ B） Update

29、the firmware on the RAID controller. （ C） Restart the installation. During the text-mode setup-mode setup, press F6. （ D） Restart the installation. During the text-mode setup, create a new partition. （ E） Insert a floppy disk containing the OEM SCSI driver and specify the additional driver. 微软认证 70-

30、215模拟试卷 4答案与解析 1 【正确答案】 A 【试题解析】 Explanation: To install a Windows 2000 computer as a domain controller in a Windows NT 4.0 domain, we must first install Windows NT 4.0 the computer as a BDC in the Windows NT 4.0 domain and then promote the BDC to PDC. We must then upgrade the machine to Windows 200

31、0 Server. When upgrading the domain controllers in a Windows NT domain to Windows 2000, we must upgrade the primary domain controller first. Incorrect answers: B: The computer must be installed as BDC and then later promoted to PDC. C: The computer must first be installed as a Windows NT 4.0 BDC and

32、 then promoted to PDC. D: The computer must first be installed as a Windows NT 4.0 BDC and then promoted to PDC. 2 【正确答案】 A 【试题解析】 Explanation: The hardware abstraction layer (HAL) is installed during the installation of the operating system. Usually the operating system will detect the HAL and inst

33、all a standard HAL. To install the customized hardware abstraction layer (HAL) designed for the computer that the manufacturer has provided we must press F6 when the Windows 2000 setup prompts us to do so. This will allow us to supply the setup program with the customized HAL that should be installe

34、d. To supply a HAL file to Setup, we should press F5 and specify the type of custom Hardware Abstraction Layer (HAL) to be loaded by the Setup Loader and installed by text-mode Setup. Incorrect answers: B: The Recovery Console is not used to install the HAL. C: The Emergency Repair process is not us

35、ed to install the HAL. D: Device manager could be used to upgrade the HAL for multiprocessor support. However, the HAL is configured during the Windows 2000 installation phase. 3 【正确答案】 A 【试题解析】 Explanation: There are four ways to perform an attended installation: 1. Boot to a CD-ROM, thereby invoki

36、ng the setup routine. 2. Boot to a current operating system with CD-ROM support and manually invoke the setup routine. 3. Boot to a set of four setup disks and then provide the CD-ROM when prompted. 4. Boot to a network-aware operating system and invoke setup over the network. If you have a computer

37、 whose BIOS supports booting from a CD-ROM, you can set up Windows 2000 Server without installing an operating system on your hard drive and without requiring network support. To do so, configure your computer to boot to the CD-ROM in the BIOS. In the above scenario the server failed and for you to

38、recover the server as quickly as possible and recovering as much data as possible you need to use the Windows 2000 Server CD and select the Repair option in Setup. Incorrect answers: B: This option will not be the best to follow if the server is to be recovered within the shortest possible time. You

39、 will also lose some data since re-creating the shared folders on the first hard disk would already have data missing since Partition C is corrupted. C: Emergency Repair Disk enables you to recover from Registry settings that render your system inoperable. This might be misconfiguration that could n

40、ot be caught with the Last Known Good Configuration, or it might be deleted user accounts or other Registry changes. This is not a registry problem. The Emergency Repair Disk can be used to facilitate some system repairs on your Windows 2000 server. Essentially, the disk can be used to repair startu

41、p problems, like when essential startup files are not present and your Server refuses to boot. However, this problem needs to be addresses as quickly as possible and making use of the Repair option in Setup from the Windows 2000 Server CD would be the quicker method. D: The Recovery console is a pow

42、erful text-based boot alternative for Windows 2000 Server. If your system becomes so corrupt that it will not boot and no other repair process will help, you can boot to the Recovery console and copy files to or from your server. In addition, you can stop and start services, if a service that you ha

43、ve installed causes problems with booting. This option does not represent the quickest way to address the problem at hand. 4 【正确答案】 A 【试题解析】 Explanation: It is possible to administer the printers with Internet Explorer but we will have to specify the full name of the print server in the URL. In this

44、 scenario it is: print10.marketing.blueskyairlines.local. Incorrect answers: B: The printer name is print10.marketing.blueskyairlines.local not print10.blueskyairlines.local. Therefore print10.marketing.blueskyairlines.local must be specified as the URL. C: The printer name is print10.marketing.blue

45、skyairlines.local not print10. Therefore print10.marketing.blueskyairlines.local must be specified as the URL. D: The printer name is print10.marketing.blueskyairlines.local not print10.blueskyairlines.local. Therefore print10.marketing.blueskyairlines.local must be specified as the URL. 5 【正确答案】 A

46、【试题 解析】 Explanation: You have given King access to the files by adding him to a group that has access to the files (the AcctPay group). King will need to log off and log on again to reflect his new group membership. Incorrect Answers: B: Kings account does not need to be in the same OU as the server

47、 (Corpfiles). C: King has been added to a group that has Full Control permission on the files. This is sufficient to give him access to the files. You do not need to give Kings account explicit permissions to the files. D: The AcctPay domain local group already has Full Control NTFS permissions on t

48、he accounting folder. 6 【正确答案】 C 【试题解析】 Explanation: To be able to delete the file a user with administrative rights has to take the ownership of the file and then grant them self enough permission to delete it. Incorrect answers: A: The administrator is not listed on the DACL of the file. To change

49、 the permissions on the file, we must first take ownership of the file. B: We should only take ownership of the file, not the folder. D: We should only change the permissions of the file, not the folder. 7 【正确答案】 C,E 【试题解析】 Explanation: As soon as your machine boots into the text-based portion of Setup, you may notice a prompt at the bottom of the screen that tells you to press F6 if you need to install additional SCSI or RAID drivers. If you dont want these additional drivers, just wait a few seconds and it will go away. But if your system has a SC