ASTM D3475-2007 Standard Classification of Child-Resistant Packages《防儿童拆开的包装用标准分类》.pdf

1、Designation: D 3475 07Standard Classification ofChild-Resistant Packages1This standard is issued under the fixed designation D 3475; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses

2、 indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This classification covers various types of child-resistantpackages.1.2 The examples for each type of child-resistant packagingare not intended to be all-i

3、nclusive, but are included only as anaid in the understanding and comprehension of each type ofclassification.1.3 Listings are not to be considered endorsements orapproval of the package by ASTM.2. Terminology2.1 Definitions of Terms Specific to This Standard:2.1.1 child-resistant packageas defined

4、by the PoisonPrevention Packaging Act, packaging that is designed orconstructed to be significantly difficult for children under fiveyears of age to open or obtain a toxic or harmful amount of thesubstance contained therein within a reasonable time, and notdifficult for normal adults to use properly

5、 but does not meanpackaging which all such children cannot open or obtain atoxic or harmful amount within a reasonable time.22.1.2 unit dose packagean immediate product container/package designed and labeled in such a manner that eachindividual product package is intended to be opened or usedone ti

6、me in a generally non-reclosable or non-resealablemanner, separately from the other individual product units inthe package, or the entire contents of a single unit packageintended for use in one application.2.1.2.1 DiscussionNormally used for pharmaceutical, hu-man healthcare, and nutritional produc

7、ts in dry solid, topical,transdermal, or liquid form.Aunit of sale package may containone or more individual unit dose packages, that is, individuallywrapped transdermal patches, pre-filled syringes and syringecartridges, blister cards with multiple tablets or capsules, andso forth. Unit dose packag

8、es may or may not be child-resistantin accordance with the regulatory requirements of the packagecontents.2.1.3 unit use/single use packagean immediate productcontainer/package, which may include label directions for use,designed in such a manner that each individual productpackage is intended to be

9、 opened or used one time separatelyfrom the other individual product units in the package, or theentire contents of a single unit package intended for use in oneapplication.2.1.3.1 DiscussionThese packages are generally non-reclosable or non-reusable. A unit of sale package may consistof one or more

10、 non-reusable individual packages. Generallyused for household, automotive, chemical, pesticide, veteri-nary, garden and other products not intended for humaningestion. Package styles may include some aerosol, that is,foggers, soluble film, canisters, pouches, and so forth, filledwith liquids, drys,

11、 powders, and other product forms. Packagesmay or may not be child-resistant in accordance with theregulatory requirements of the package contents.3. Significance and Use3.1 This classification scheme defines the type of motions,skills, or tools required for a particular type of child-resistantpacka

12、ge and provides examples of current packaging withinthat type.3.2 Reference to a particular package in this classification isnot intended in any manner to denote endorsement or approvalof the package by ASTM.3.3 Packages have been included as examples based onmanufacturers claims of child-resistance

13、 Child-resistantpackage functionality for any specific product type must bedetermined by the packager/manufacturer following the guide-lines of the PPPA of 1970 and the most current version of theCFR Title 16 Part 1700 and Title 40 Part 157.2The listing ofa package in this classification is not an

14、indication of whetheror not it has been successfully tested in accordance with theaforementioned guidelines.3.4 Additions or deletions to the examples should be re-ported to Committee D10 on Packaging, for incorporation intothis classification during the next revision.4. Basis of Classification4.1 T

15、he basis for classification for child-resistant closure,and the classifications themselves, appear in Table 1.1This classification is under the jurisdiction of ASTM Committee D10 onPackaging and is the direct responsibility of Subcommittee D10.31 on ChildResistant Packaging and Closure Systems.Curre

16、nt edition approved April 1, 2007. Published April 2007. Originallyapproved in 1976. Last previous edition approved in 2006 as D 3475 06.2Code of Federal Regulations, Title 16, Part 1700 and Title 40, Part 157. A copymay be obtained through the Superintendent of Documents, U.S. GovernmentPrinting Of

17、fice, Washington, DC 20402.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.TABLE 1 Classification of Child-Resistant PackagesDescription ExampleTYPE I RECLOSABLE PACKAGINGCONTINUOUS THREAD CLOSUREA Random push down while turning; no

18、orientation of the push down forcenecessaryKerr CR-I, II, III, IV and CRTE; O-I Clic-Loc I, II, and III, Argus-Loc I and II andChem-Loc; Alcoa Tot-Gard III; Van Blarcom metal-on-metal, Saf-Cap I, II, III,and IIIA; Ferdinand Gutman; Poly Seal Corp.; Reliable Products; Rexam F.G.(Final Generation), Ca

19、row-Turnloc; Comar-Secure Cap; Reike-FS652; CCLContainer Corporaton (tube) O-I Inc. Ultra-Loc; Van Blarcom Closures Inc. Dropper Closure, Saf-CapConvertible, 1-1/8 Beta Closure; Bericap North America, Bericap SK28/26 CRSlitband; Sanner of America, Child Resistant Screw CapB Localized squeeze force w

20、hile turning; the force must be applied to adesignated location on the closure skirtRexam Squeeze-Lok, Snap-Lok, Econo-Lok, Tip Lok, DOT, DoughertyBrothers; Fastex; O-I Squeeze and Turn, Tab-Loc; Berry Plastics-Squeeze Weatherchem-Top Squeeze; Kerr-Tab II Squeeze Rieke FS633, HZ43CR, HZ24CR; US Can-

21、Screw top; O-I Inc. DrainBack System; Rexam Closures Rieke Corporation Stolz HZ32CR; Val-Pak Products, 63-400Squeeze CapC Random squeeze while turning; no orientation of the squeeze force isnecessaryO-ID Holding a fitment while turning; two-handed operation is normally required Thomas Closure Moldcr

22、aft; M Berry Plastics,Lite-TouchE Key or device required to open Research and Devices; Ben King Associates Baby Safe; TredegarF Random lift while turning; no orientation of the lift force is necessaryG Localized lift of cap skirt or tab on closure while turning Charles A. Breskin; Alcoa Tot Gard IIH

23、 Localized push down while turning; force must be applied to a designatedplace on the top of the closureMack Wayne Plastics; Anchor Hocking Mold Craft; O-II Set combination before turning None at this timeJ Pull tab then turn Intermova Gate Lok, Lefty LokK Align arrows, then push tab down, then turn

24、 O-I Cognitive ClosureL Turn closure until stops, then lift and continue trying to open Berry Plastics Corp.-pail; Berry Plastics Corporation ZH05SQM Localized push in while turning, force must be applied to designated place onclosureU S Can Company-pailN Localized push back lever while turning, for

25、ce must be applied to designatedplace on closureNone at this timeO Turn the top cap until stops, then push down and turn M Pac-Tec Inc.-Palm-N-Turn; O-I Screw Loc; Kerr CR-V Thornton Plastics Tot-Lok; Child Related Research, Inc.Push-Palm; Design Consultant Plastics; Iventive Packaging Corp., Clarke

26、Container Push Cebal Americas (tube) O-I Inc. Purse Pak; O-I, Spring-LocB Hold fitment down while turning closure Rexam Snap-Lok, Econo-Lok, Tip Lok; O-I-1-ClikC Unlock outer ring to release lugs Thornton PlasticsD Depress fitment and slide to one side Plastic box with sliding lug lock (manufacturer

27、 unknown); Creative PackagingLok-PakE Holding of fitment while turning; two-handed operation is normally requiredand no orientation of holding force is specifiedNone at this timeTYPE III RECLOSABLE PACKAGINGSNAP CLOSUREA(1) Align two points then push up on tab or lip Bristol-Myers; Calmar Snap Safe;

28、 Stull; Plastic Research; Henlopen Snap Cap;Lermer CR Snap; O-I Snaploc; Central States Can Co.;Boyle Midway; Clarke Container Snap Lok; VH Technologies-virtual hinge(2) Rotate then lift Continental Carlisle Co. Unikon; Magenta Corp.-PillpackB Localized downward pressure to open Polymold; Basic Prod

29、ucts Poly MoldC Downward pressure on top with simultaneous upward pull on edges Versatile Ind. ProductsD(1) Press to release and then lift hinged tab (dispensing cap) Magenta Corp.; Lumlite PopLok; Polytop ToggLoc Dispensing Closure(2) Press to release, follow by lifting force on tab (removable cap)

30、 Wheaton Industries Ryles Closure; O-I hood type, Magenta Corp. Pop-Lok Plug(3) Push up to release Stull Easy Flip 2008 captive hinge; Stull Technologies, Pry Open Closure(4) Push in or up, or both, to release Shellvick Industries, Inc.(5) Pull to release and lift hinged lid (dispensing cap) Stull T

31、echnologies: StullSUREE(1) Squeeze and lift two specific points simultaneously Pennwalt-Lye; J. L. Clark(2) Squeeze and lift one specific point simultaneously(3) Squeeze two points simultaneously to open MAC Closures Inc.; FTCR 19000, FTCR 19100, FTCR 19500; Philips RxPackaging LLC, Rx Squeeze VialF

32、 Squeeze two specific points simultaneously to unlock sides, then squeezespecific point on third side while lifting lidShaw-Clayton Press N Pop; Norman J. LarusG Requires key device or fingernail or coin or other tool to open Skilcraft; Continental Plastics Med Guard; Plastic Container Corp. Prex Co

33、n;Polytop Corp. LokTop; Myco Corp. Surelock, Vicap; Rexam Snap Cap;Pin Lock, Inc. Pin Lock; Kerr Glass Pry Off; Genpak Corp. Pry Off;Cin-Made Corporation (container) CMI (closure) Tec Loc; Continental FibreDrum Leverpak; Berry Plastics; Plastican, Inc. Lever/Toggle Band on Pail;Container Products In

34、c. Lever Lok; Cin Made Corp. Friction Fit Plug; SilganPlastics Corporation 28MM-410 CR Dispensing Nozzle ClosureH Lift locking tab then push up Internova Corp. Flap LokD3475072TABLE 1 ContinuedDescription ExampleI Random squeeze while turning and pulling up Stull Snap On/Twist OffJ Align two points,

35、 push down outer ring, then push up tab or lip Robert Linkletter AssociatesK Rotate cap to a first index, then counterrotate cap to a second index, thenlift capYellowstone Environmental Science, Inc. WiseCapTYPE IV UNIT NON-RECLOSABLE PACKAGINGFLEXIBLE (STRIP/POUCH)A Internal (hidden) tear notch Sha

36、rp; Reynolds Aluminum (Safety Pak 101); PCM Corp.; Cardinal Health;West Pharma-Services; Reed-Lane, Inc.B Oriented tear Schering Corp.; Sharp; American National Can Co.; Reed-Lane, Inc.C Requires tool Hargo Flexible Packaging (Pos-I-Pak); Sharp; Hach Chemical Co.;American National Can Co.; Cardinal

37、Health;Paco; Reed-Lane, Inc.; PactechTYPE V UNIT NON-RECLOSABLE PACKAGINGRIGIDA Requires tool All metal canB Requires localized force None at this timeC Peelable backing or coating Standard PackagingPackage is not opened or activated to expose contents-1. One piece plastic unitwith multiple holes to

38、 allow use of product without human contact; and 2. Twopiece plastic unit with multiple holes to allow use of product without humancontactTYPE VI UNIT RECLOSABLE PACKAGEA Metered device None at this timeTYPE VII AEROSOL PACKAGESA Localized squeeze while lifting removes overcap (actuates normally) Kn

39、ight Engineering; Berry Plastics; Cobra Plastics Inc. 65 mm NICRB Hold fitment still while turning (actuates normally) Thomas ClosureC Hold fitment still while lifting (actuates normally) None at this timeD Requires use of a key or device to open (actuates normally) Newman Green, Shellvick Answer Cu

40、p 200 TR/CRE Directional overcap-actuator must be oriented, then pressed O-IF Directional overcap-actuator requires sequential simultaneous pushing oflocking device and actuatorUnion Carbide; Seaquist; Rexam CR AerosolG Directional overcap-actuator which requires a finger longer than that of a child

41、 Shell ChemicalH Press to release, lift hinged tab at center of the closure followed by an upwardforce on the tab to remove overcap (actuates normally)None at this timeI Directional overcap-actuator that requires the lifting of a hinged tab to revealthe actuatorNone at this timeJ Random push down wh

42、ile turning; no orientation of the downward force isnecessaryITL (Hayes-Albion)K Localized press down then pull up at arrow Berry Plastics Corp.L Localized push up to remove Berry Plastics Corp.M Line-up arrows on the overcap and ring to remove Magenta Corporation (design by Innopak) Airsafe; Pierso

43、n Industries Inc.(Contact Technimark Associates) Hold Collar Line up Arrows Safety Closure,Universally Adaptable Safety ClosureTYPE VIII NON-RECLOSABLE PACKAGINGSEMI-RIGID (BLISTER)A Remove a portion(1) Remove portion (tab) and peel back Sharp; Merial Ltd., Child-Resistant Blister Pack(2) Remove por

44、tion (tab), peel back, and push out Sharp(3) Remove portion (tab) and push out Meadwestvaco, PerfPak; Howell Packaging, Howel-CR-III(4) Remove portion (tab), rotate the blister to orient, push through Colbert, PharmaDial(5) Push to expose tab, peel back tab, push out Keystone Folding Box Co., Key-Pa

45、k F1; Sharp Corporation AdvantagePak(6) Zipper card-pull back card strip behind tablet and push out Sharp Ivers-LeeB Peel(1) Peel back Sharp(2) Peel back and push out Sharp; Proclinical, Pick and PeelC Bend(1) Center bend Sharp(2) Bend, Peel off, peel back, and push out Sharp(3) Bend, peel back, pus

46、h out Intini Marketing, Bend Cardinal Health, E-Z tear(2) Internal tear notch (visible) Sharp Ivers-LeeE Push Out(1) Push out Sharp; Cardinal Health RxBarrier Pack(2) Press-in and push-out MeadWestvaco, PIPO PackF Requires ToolRequires tool SharpATYPE IX DISPENSERS (NOT INTENDED TO BE REMOVED)BA Fin

47、ger pumpD3475073TABLE 1 ContinuedDescription Example(1) Directional pump must be oriented (by rotation to a second stop position)then pumped with fingerO-I(2) Push tab while rotating directional pump to spray position, then pump withfingerPackaging Concepts Association, LLC CR Mpak; Packaging Concep

48、ts Assoc.,LLC, Snap-on Dispensing System(3) Line-up arrows on the overcap and ring to remove Duerr (design by Innopak), AirsafeB Trigger pump(1) Press down on a point to release lock, rotate orifice to spraying position,and squeeze triggerO-I; Continental AFA Dispensing Co., 0176 CR; Saint-Gobain Ca

49、lmar, MixorHP; Guala Dispensing S.p.A., TS3 CRP Screw and Snap-on Versions(2) Press in and up on orifice (lock cover) and squeeze trigger AFA Corp.(3) Push down on a point and slide it back to release lock, then rotate theorifice to the spraying position, and squeeze triggerSpray Plast S.P.A. Vela CR(4) Press in and pull down to release lock and squeeze trigger Guala Dispensing S.p.A., TS1 CRPC Line up arrows, squeeze and turn dispensing unit where the dispensing capis permanently attached to the bottleVan BlarcomD Line up arrows, and pull apart to open dispensing slot of a