ASTM D3735-2007 Standard Specification for VMP Naphthas《VMP石油脑的标准规范》.pdf

1、Designation: D 3735 07Standard Specification forVM the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an edit

2、orial change since the last revision or reapproval.1. Scope*1.1 This specification covers four types of moderatelyvolatile hydrocarbon solvents, mainly aliphatic in compositionand normally petroleum distillates. These solvents are usedprimarily by the coatings industry and are commonly referredto as

3、 VM for purposes of determining conformance with thisstandard, an observed value or a calculated value shall berounded-off “to the nearest unit” in the last right-hand digitused in expressing the specification limit, in accordance withthe rounding-off method of Practice E 29.1.4 For specific hazard

4、information and guidance, see thesuppliers Material Safety Data Sheet for materials listed in thisspecification.2. Referenced Documents2.1 ASTM Standards:2D56 Test Method for Flash Point by Tag Closed Cup TesterD86 Test Method for Distillation of Petroleum Products atAtmospheric PressureD 130 Test M

5、ethod for Corrosiveness to Copper fromPetroleum Products by Copper Strip TestD 156 Test Method for Saybolt Color of Petroleum Prod-ucts (Saybolt Chromometer Method)D 268 Guide for Sampling and Testing Volatile Solventsand Chemical Intermediates for Use in Paint and RelatedCoatings and MaterialD 1133

6、 Test Method for Kauri-Butanol Value of Hydrocar-bon SolventsD 1159 Test Method for Bromine Numbers of PetroleumDistillates and Commercial Aliphatic Olefins by Electro-metric TitrationD 1209 Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)D 1296 Test Method for Odor of Volatile Solvent

7、s andDiluentsD 1319 Test Method for Hydrocarbon Types in LiquidPetroleum Products by Fluorescent Indicator AdsorptionD 3257 Test Methods for Aromatics in Mineral Spirits byGas ChromatographyD 3278 Test Methods for Flash Point of Liquids by SmallScale Closed-Cup ApparatusD 4052 Test Method for Densit

8、y and Relative Density ofLiquids by Digital Density MeterD 5386 Test Method for Color of Liquids Using TristimulusColorimetryE29 Practice for Using Significant Digits in Test Data toDetermine Conformance with SpecificationsE 300 Practice for Sampling Industrial Chemicals2.2 U.S. Federal Specification:PPP-C-2020 Chemicals, Liquid, Dry, and Paste: Packagingof33. Classification3.1 VM naphthas; solvents; VM or through the ASTM website(www.astm.org).D3735073