ASTM D4391-1993a(2013)e2 Standard Terminology Relating to The Burning Behavior of Textiles《有关纺织品燃烧特性的标准术语》.pdf

1、Designation: D4391 93a (Reapproved 2013)2Standard Terminology Relating toThe Burning Behavior of Textiles1This standard is issued under the fixed designation D4391; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last r

2、evision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.The definitions in this standard have been approved by the Society and are included in D123 “Terminology Relating to Textiles”. Theyare

3、published as a separate collection for the convenience of persons interested in the burning behavior of textiles. A bibliography ofrelated literature is given in Appendix X1.1NOTEThe term “exposure energy to thermal end point” was added editorially in May 2013.2NOTEThe terms “critical sewn seams” an

4、d “retained sewn seam strength” were added editorially in September 2014.afterflame, npersistent flaming of a material after the igni-tion source has been removed. D13.92 D4391after-flame time, nthe length of time for which a materialcontinues to flame after the ignition source has beenremoved. D13.

5、92 D4391afterglow, nglow in material after the removal of an externalignition source or after the cessation (natural or induced) offlaming of the material. (See also flame, glow, and smol-dering.)afterglow time, nthe time afterglow continues after thecessation of flaming or after removal of the igni

6、tion source.D13.92 D4391burning behavior, nall the changes that take place whenmaterials or products are exposed to a specified ignitionsource.charring, nthe formation of carbonaceous residue as theresult of pyrolysis or incomplete bustible textile, na textile that will ignite and burn orthat will g

7、ive off vapors that will ignite and burn whensubjected to external sources of ignition. (Compare flam-mable textile, noncombustible textile.)combustion, na chemical process of oxidation that occurs ata rate fast enough to produce heat and usually light either asglow or flames.DISCUSSIONSome oxidatio

8、n such as that of hydrogen emits radia-tion outside the visible spectrum.critical sewn seams, nin assembly of flame resistant textiles,those sewn junctions where failure would result in immedi-ate danger or injury.dangerously flammable textile, n not defined. This term isimplied in the Standard for

9、the Flammability of ClothingTextiles (16 CFR Part 1610) under the Flammable FabricsAct (15 USC 1191, et seq.) from which a meaning can beinferred. (See also flammable textile.)embrittlement, nthe formation of a brittle residue as theresult of pyrolysis or incomplete combustion.exposure energy to the

10、rmal end point, nthe thermal energytransferred through a specimen that is sufficient to causeignition of contiguous materials. D13.92 D7140fire, nas related to textile flammability, an uncontrolledconflagration in which materials are destroyed by burning asevidenced by flames of varying size and sha

11、pe, and a highintensity heat source of 5 kw or greater, such as a burningwaste basket, grease-fire on a stove, burning building orforest fire.flame, nas related to textile flammability, a hot luminouszone of gas or matter in gaseous suspension, or both, that isundergoing combustion, that is relative

12、ly constant in sizeand shape, and that produces a relatively low heat flux.(Compare fire.)DISCUSSIONExamples are a match flame, candle flame, or a Bunsenburner gas flame.flame resistance, nthe property of a material wherebyflaming combustion is prevented, terminated, or inhibitedfollowing applicatio

13、n of a flaming or nonflaming source ofignition, with or without subsequent removal of the ignitionsource.DISCUSSIONFlame resistance can be an inherent property of thebasic material or product, or it may be imparted by specific treatment.The degree of flame resistance exhibited by a specific material

14、 duringtesting may vary with different test conditions.flame resistant, adjhaving flame resistance.DISCUSSION“Flame resistant” is the government mandated descrip-tion for certain products that meet established governmental confor-mance standards or specifications when the product is tested by a1This

15、 terminology is under the jurisdiction ofASTM Committee D13 on Textilesand is the direct responsibility of Subcommittee D13.92 on Terminology.Current edition approved Jan. 1, 2013. Published January 2013. Originallyapproved in 1984. Last previous edition approved in 2006 as D4391 93(2006)1.DOI: 10.1

16、520/D4391-93AR13E02.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States1specific method. Where no conformance standards exist, “flame resis-tant” is a relative term and is used to compare one material to another.flame retardant, adjnot de

17、fined. This term should not beused as an adjective except in the terms “flame-retardant-treated” and “flame-retardant treatment”.flame retardant, na chemical used to impart flame resis-tance.flame-retardant-treated, adjhaving received a flame-retardant treatment.DISCUSSIONThe term “flame-retardant-t

18、reated” does not apply totextiles that are inherently-flame-resistant due to the intrinsic propertiesof the material or the fiber-forming polymer.flame-retardant treatment, na process for incorporating oradding flame retardant(s) to a material or product.DISCUSSIONThe term “flame-retardant treatment

19、” does not apply totextiles that are inherently flame resistant due to the intrinsic propertiesof the material or the fiber-forming polymer.flame spread, nthe propagation of a flame away from thesource of ignition. D13.92 D4391flame spread time, nthe time taken by a flame on a burningmaterial to tra

20、vel a specified distance under specifiedconditions. D13.92 D4391flammability, nthose characteristics of a material that per-tain to its relative ease of ignition and relative ability tosustain combustion.flammable textile, nany combustible textile that burns witha flame. (See also flammability. ) (C

21、ompare combustibletextile, noncombustible textile.)flaming debris, nmaterial which continues to flame as itseparates and moves away from the flaming source.D13.92 D4391glow, nvisible, flameless combustion of the solid phase of amaterial. (See also afterglow and smoldering.)DISCUSSIONA solid may both

22、 glow and give off combustibles thatburn in the gas phase (that is, flame) but the two are not necessarilyinterdependent. Aspects of glow not involving combustion are definedin dictionaries of general terms.heat durability, nthe extent to which a material retains itsuseful properties at ambient air

23、conditions, following itsexposure to a specified temperature and environment for aspecified time and its return to the ambient air conditions.(Compare heat resistance.)heat durable, adjhaving heat durability.heat flux, nthe thermal intensity indicated by the amount ofpower per unit area.DISCUSSIONTh

24、e SI unit for heat flux is watts per square meter(W/m2).heat resistance, nthe extent to which a material retainsuseful properties as measured during exposure of the mate-rial to a specified temperature and environment for aspecified time. (Compare heat durability.)heat resistant, adjhaving heat resi

25、stance.ignition, nthe initiation of combustion.inherent flame-resistance, nas applied to textiles, flameresistance that derives from an essential characteristic of thefiber from which the textile is made. (Compare flameresistance.)inherently-flame-resistant, adjhaving inherent flame-resistance.melti

26、ng, nthe liquefaction of material under the influence ofheat. D13.92 D4391noncombustible textile, na textile that will neither ignite norgive off vapors that will ignite when subjected to externalsources of ignition. (Compare combustible textile.)nonflammable textile, nany combustible textile that b

27、urnswithout a flame. (See also glow, smoldering.) (Compareflammable textile, combustible textile, noncombustibletextile.)retained sewn seam strength(RSS 50), nfor testing of flameresistant textiles, the mean value of force that results in thefailure of a sewn seam assembly after exposure to high hea

28、t,open flame, or both.self-extinguishing, nnot defined. The Board of Directors ofASTM has ruled that the term “self-extinguishing” shall notbe used in ASTM standards. It has no meaning except inassociation with a specific test method or specific conditionsof burning.shrinkage, na decrease in one or

29、more dimensions of anobject or material.smoldering, nthe combustion of a solid material withoutaccompaniment of flame but generally with the productionof smoke. (See also afterglow and glow.)DISCUSSIONSmoldering can be initiated by small or low tempera-ture sources of ignition, especially in loose m

30、aterials, and may bepresent for an extended period of time after which a flame might beproduced.wall and top material, nany pliable planar structure used asa nonbase surface in camping tentage including roofs, sides,windows, screens, door, awnings, flies, and canopies.D13.92 D4391INDEXING TERMSThis

31、standard is indexed under the following terms: burning behavior, flammability, and terminology.D4391 93a (2013)22APPENDIX(Nonmandatory Information)X1. RELATED LITERATURE(1) “Establishing World Flammability Terms”, TextileWorld Vol 126 No. 6, June 1975, pp. 107109.(2) ASTM Standard E176“ Terminology

32、Relating to FireStandards.”(3) Gaskill, James R., “Concept of Smoke and Fire Gases,”Standardization News Vol 7 No. 12, December 1979, pp.2324.(4) “Burning Behavior of Textiles and Textile ProductsVocabulary: Part 1” Draft International Standard ISO/DIS4880/1.(5) “Burning Behavior of Textiles and Tex

33、tile ProductsVocabulary: Part 2” Draft International Standard ISO/DIS4880/2.(6) Warren Y. Kimbal, Fire Department Terminology, 4th ed.,National Fire Protection Association, Boston (1970).(7) Kuvshinoff, B. W., Fire Sciences Dictionary, John Wileyor through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the Copyright Clearance Center, 222Rosewood Drive, Danvers, MA 01923, Tel: (978) 646-2600; http:/ 93a (2013)23