ASTM D4485-2011 Standard Specification for Performance of Engine Oils《发动机润滑油性能的标准规范》.pdf

1、Designation: D4485 11Standard Specification forPerformance of Engine Oils1This standard is issued under the fixed designation D4485; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses

2、 indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the Department of Defense.INTRODUCTIONThis specification covers all the currently active American Petroleum Insti

3、tute (API) engine oilperformance categories that have been defined in accordance with theASTM consensus process.Thereare organizations with specifications not subject to the ASTM consensus process, such as theInternational Lubricant Standardization and Approval Committee (ILSAC), American PetroleumI

4、nstitute (API SM Specification), and the Association des Constructeurs Europeans dAutomobiles(ACEA). Certain of these specifications, which have been defined primarily by the use of currentASTM test methods, have also been included in the Appendix of this document for information.In the ASTM system,

5、 a specific API designation is assigned to each category. The system isopen-ended, that is, new designations are assigned for use with new categories as each new set of oilperformance characteristics are defined. Oil categories may be referenced by engine builders inmaking lubricant recommendations,

6、 and used by lubricant suppliers and customers in identifyingproducts for specific applications. Where applicable, candidate oil programs are conducted inaccordance with theAmerican Chemistry Council (ACC) PetroleumAdditives ProductApproval Codeof Practice.Other service categories not shown in this

7、document have historically been used to describe engineoil performance (SA, SB, SC, SD, SE, SF, SG and CA, CB, CC, CD, CD-II, CE, CF, CF-2, CF-4,CG-4) (see 3.1.2). SA is not included because it does not have specified engine performancerequirements. SG is not included because it was a category that

8、could not be licensed for use in theAPI Service Symbol after Dec. 31, 1995. The others are not included because they are based on testmethods for which engine parts, test fuel, or reference oils, or a combination thereof, are no longeravailable. Also, the ASTM 5-Car and Sequence VI Procedures are ob

9、solete and have been deletedfrom the category Energy Conserving and Energy Conserving II (defined by Sequence VI).Information on excluded older categories and obsolete test requirements can be found in SAE J183.1. Scope1.1 This specification covers engine oils for light-duty andheavy-duty internal c

10、ombustion engines used under a variety ofoperating conditions in automobiles, trucks, vans, buses, andoff-highway farm, industrial, and construction equipment.1.2 This specification is not intended to cover engine oilapplications such as outboard motors, snowmobiles, lawnmowers, motorcycles, railroa

11、d locomotives, or oceangoingvessels.1.3 This specification is based on engine test results thatgenerally have been correlated with results obtained on refer-ence oils in actual service engines operating with gasoline ordiesel fuel. As it pertains to the API SL engine oil category, itis based on engi

12、ne test results that generally have beencorrelated with results obtained on reference oils run ingasoline engine Sequence Tests that defined engine oil catego-ries prior to 2000. It should be recognized that not all aspectsof engine oil performance are evaluated by the engine tests inthis specificat

13、ion. In addition, when assessing oil performance,it is desirable that the oil be evaluated under actual operatingconditions.1.4 This specification includes bench and chemical tests thathelp evaluate some aspects of engine oil performance notcovered by the engine tests in this specification.1This spe

14、cification is under the jurisdiction of ASTM Committee D02 onPetroleum Products and Lubricants and is the direct responsibility of SubcommitteeD02.B0 on Automotive Lubricants.Current edition approved May 1, 2011. Published May 2011. Originallyapproved in 1985. Last previous edition approved in 2010

15、as D448510a. DOI:10.1520/D4485-11.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.1.5 The values stated in SI units are to be regarded asstandard. No other units of measurement are included in thisstandard.1.5.1 ExceptionsThe roller

16、follower shaft wear in TestMethod D5966 is in mils. Appendix X2 descriptions areverbatim API language, which contains a few non-SI units.2. Referenced Documents2.1 ASTM Standards:2D92 Test Method for Flash and Fire Points by ClevelandOpen Cup TesterD93 Test Methods for Flash Point by Pensky-MartensC

17、losed Cup TesterD130 Test Method for Corrosiveness to Copper from Pe-troleum Products by Copper Strip TestD874 Test Method for Sulfated Ash from Lubricating Oilsand AdditivesD892 Test Method for Foaming Characteristics of Lubricat-ing OilsD2622 Test Method for Sulfur in Petroleum Products byWaveleng

18、th Dispersive X-ray Fluorescence SpectrometryD2887 Test Method for Boiling Range Distribution ofPetroleum Fractions by Gas ChromatographyD3244 Practice for Utilization of Test Data to DetermineConformance with SpecificationsD4171 Specification for Fuel System Icing InhibitorsD4683 Test Method for Me

19、asuring Viscosity of New andUsed Engine Oils at High Shear Rate and High Tempera-ture by Tapered Bearing Simulator Viscometer at 150 CD4684 Test Method for Determination of Yield Stress andApparent Viscosity of Engine Oils at Low TemperatureD4951 Test Method for Determination of Additive Ele-ments i

20、n Lubricating Oils by Inductively Coupled PlasmaAtomic Emission SpectrometryD5119 Test Method for Evaluation of Automotive EngineOils in the CRC L-38 Spark-Ignition Engine3D5133 Test Method for Low Temperature, Low Shear Rate,Viscosity/Temperature Dependence of Lubricating OilsUsing a Temperature-Sc

21、anning TechniqueD5185 Test Method for Determination of Additive Ele-ments, Wear Metals, and Contaminants in Used Lubricat-ing Oils and Determination of Selected Elements in BaseOils by Inductively Coupled Plasma Atomic EmissionSpectrometry (ICP-AES)D5293 Test Method for Apparent Viscosity of Engine

22、Oilsand Base Stocks Between 5 and 35C Using Cold-Cranking SimulatorD5302 Test Method for Evaluation of Automotive EngineOils for Inhibition of Deposit Formation and Wear in aSpark-Ignition Internal Combustion Engine Fueled withGasoline and Operated Under Low-Temperature, Light-Duty Conditions3D5480

23、Test Method for Engine Oil Volatility by Gas Chro-matography3D5481 Test Method for Measuring Apparent Viscosity atHigh-Temperature and High-Shear Rate by Multicell Cap-illary ViscometerD5533 Test Method for Evaluation of Automotive EngineOils in the Sequence IIIE, Spark-Ignition Engine3D5800 Test Me

24、thod for Evaporation Loss of LubricatingOils by the Noack MethodD5844 Test Method for Evaluation of Automotive EngineOils for Inhibition of Rusting (Sequence IID)3D5966 Test Method for Evaluation of Engine Oils forRoller Follower Wear in Light-Duty Diesel EngineD5967 Test Method for Evaluation of Di

25、esel Engine Oils inT-8 Diesel EngineD6082 Test Method for High Temperature Foaming Char-acteristics of Lubricating OilsD6202 Test Method forAutomotive Engine Oils on the FuelEconomy of Passenger Cars and Light-Duty Trucks in theSequence VIA Spark Ignition Engine3D6278 Test Method for Shear Stability

26、 of Polymer Contain-ing Fluids Using a European Diesel Injector ApparatusD6335 Test Method for Determination of High TemperatureDeposits byThermo-Oxidation Engine Oil SimulationTestD6417 Test Method for Estimation of Engine Oil Volatilityby Capillary Gas ChromatographyD6483 Test Method for Evaluatio

27、n of Diesel Engine Oils inT-9 Diesel Engine3D6557 Test Method for Evaluation of Rust PreventiveCharacteristics of Automotive Engine OilsD6593 Test Method for Evaluation of Automotive EngineOils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasolineand

28、 Operated Under Low-Temperature, Light-Duty Con-ditionsD6594 Test Method for Evaluation of Corrosiveness ofDiesel Engine Oil at 135CD6681 Test Method for Evaluation of Engine Oils in a HighSpeed, Single-Cylinder Diesel EngineCaterpillar 1PTest ProcedureD6709 Test Method for Evaluation of Automotive

29、EngineOils in the Sequence VIII Spark-Ignition Engine (CLR OilTest Engine)D6750 Test Methods for Evaluation of Engine Oils in aHigh-Speed, Single-Cylinder Diesel Engine1K Proce-dure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % FuelSulfur)D6794 Test Method for Measuring the Effect on Filterabil-ity o

30、f Engine Oils After Treatment with Various Amountsof Water and a Long (6-h) Heating TimeD6795 Test Method for Measuring the Effect on Filterabil-ity of Engine OilsAfter Treatment with Water and Dry Iceand a Short (30-min) Heating TimeD6837 Test Method for Measurement of Effects of Auto-motive Engine

31、 Oils on Fuel Economy of Passenger Carsand Light-Duty Trucks in Sequence VIB Spark IgnitionEngineD6838 Test Method for Cummins M11 High Soot Test2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards

32、volume information, refer to the standards Document Summary page onthe ASTM website.3Withdrawn. The last approved version of this historical standard is referencedon www.astm.org.D4485 112D6891 Test Method for Evaluation of Automotive EngineOils in the Sequence IVA Spark-Ignition EngineD6894 Test Me

33、thod for Evaluation of Aeration Resistanceof Engine Oils in Direct-Injected Turbocharged Automo-tive Diesel EngineD6896 Test Method for Determination of Yield Stress andApparent Viscosity of Used Engine Oils at Low Tempera-tureD6922 Test Method for Determination of Homogeneity andMiscibility in Auto

34、motive Engine OilsD6923 Test Method for Evaluation of Engine Oils in a HighSpeed, Single-Cylinder Diesel EngineCaterpillar 1RTest ProcedureD6975 Test Method for Cummins M11 EGR TestD6984 Test Method for Evaluation of Automotive EngineOils in the Sequence IIIF, Spark-Ignition EngineD6987/D6987M Test

35、Method for Evaluation of Diesel En-gine Oils in T-10 Exhaust Gas Recirculation Diesel EngineD7097 Test Method for Determination of Moderately HighTemperature Piston Deposits byThermo-Oxidation EngineOil Simulation TestTEOST MHTD7109 Test Method for Shear Stability of Polymer Contain-ing Fluids Using

36、 a European Diesel Injector Apparatus at30 and 90 CyclesD7156 Test Method for Evaluation of Diesel Engine Oils inthe T-11 Exhaust Gas Recirculation Diesel EngineD7216 Test Method for Determining Automotive EngineOil Compatibility with Typical Seal ElastomersD7320 Test Method for Evaluation of Automo

37、tive EngineOils in the Sequence IIIG, Spark-Ignition EngineD7422 Test Method for Evaluation of Diesel Engine Oils inT-12 Exhaust Gas Recirculation Diesel EngineD7468 Test Method for Cummins ISM TestD7484 Test Method for Evaluation of Automotive EngineOils for Valve-Train Wear Performance in Cummins

38、ISBMedium-Duty Diesel EngineD7549 Test Method for Evaluation of Heavy-Duty EngineOils under High Output ConditionsCaterpillar C13 TestProcedureE29 Practice for Using Significant Digits in Test Data toDetermine Conformance with SpecificationsE178 Practice for Dealing With Outlying Observations2.2 Soc

39、iety of Automotive Engineers Standards:4SAE J183 Engine Oil Performance and Engine ServiceClassificationSAE J300 Engine Oil ClassificationSAE J1423 Passenger Car and Light-Duty Truck Energy-Conserving Engine Oil ClassificationSAE J2643 Standard Reference Elastomers (SRE) for Char-acterizing the Effe

40、cts on Vulcanized Rubber2.3 American Petroleum Institute Publication:5API 1509 Engine Oil Licensing and Certification System(EOLCS)2.4 Government Standard:6DOD CID A-A-52039A (SAE 5W-30, 10W-30, and 15W-40)2.5 American Chemical Council Code:7ACC Petroleum Additives Product Approval Code ofPractice3.

41、 Terminology3.1 Definitions:3.1.1 automotive, adjdescriptive of equipment associatedwith self-propelled machinery, usually vehicles driven byinternal combustion engines.3.1.2 category, nin engine oils, a designation such as SH,SJ, SL, SM, CH-4, CI-4, CJ-4, Energy Conserving, and soforth, for a given

42、 level of performance in specified engine andbench tests.3.1.3 classification, nin engine oils, the systematic ar-rangement into categories in accordance with different levels ofperformance in specified engine and bench tests.3.1.4 engine oil, na liquid that reduces friction or wear, orboth, between

43、 the moving parts within an engine; removesheat, particularly from the underside of pistons; and serves asa combustion gas sealant for piston rings.3.1.4.1 DiscussionIt may contain additives to enhancecertain properties. Inhibition of engine rusting, deposit forma-tion, valve train wear, oil oxidati

44、on, and foaming are examples.D67503.1.5 heavy duty, adjin internal combustion engine op-eration, characterized by average speeds, power output, andinternal temperatures that are generally close to the potentialmaximums.3.1.6 heavy-duty engine, nin internal combustion enginetypes, one that is designe

45、d to allow operation continuous at orclose to its peak output.3.1.7 light-duty, adjin internal combustion engine opera-tion, characterized by average speeds, power output, andinternal temperatures that are generally much lower than thepotential maximums.3.1.8 light-duty engine, nin internal combusti

46、on enginetypes, one that is designed to be normally operated at substan-tially less than its peak output.3.1.8.1 DiscussionThis type of engine is typically in-stalled in automobiles and small trucks, vans, and buses.3.1.9 lugging, adjin internal combustion engine opera-tion, characterized by a combi

47、ned mode of relatively low-speed and high-power output.3.2 Definitions of Terms Specific to This Standard:3.2.1 C category, nthe group of engine oils that areintended primarily for use in diesel and certain gasoline-powered vehicles.4Available from Society of Automotive Engineers (SAE), 400 Commonwe

48、althDr., Warrendale, PA 150960001.5Available from American Petroleum Institute (API), 1220 L. St., NW, Wash-ington, DC 20005-4070, http:/www.api.org.6Available from U.S. Government Printing Office Superintendent of Documents,732 N. Capitol St., NW, Mail Stop: SDE, Washington, DC 20401.7Available fro

49、mAmerican Chemical Council, 1300 Wilson Blvd.,Arlington, VA22209.D4485 1133.2.2 Energy Conserving category, nthe group of engineoils that have demonstrated fuel economy benefits and areintended primarily for use in automotive gasoline engineapplications, such as passenger cars, light-duty trucks, andvans.3.2.3 S category, nthe group of engine oils that areintended primarily for use in automotive gasoline engineapplications, such as passenger cars, light-duty trucks, andvans.4. Performance Classification4.1 Automotive engine oils are classified in three