ASTM D4899-1999(2009) Standard Practice for Analysis of Vegetable Tanning Materials-General《植物性鞣皮材料分析的标准实施规程 总则》.pdf

1、Designation: D 4899 99 (Reapproved 2009)Standard Practice forAnalysis of Vegetable Tanning MaterialsGeneral1This standard is issued under the fixed designation D 4899; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of las

2、t revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This practice is intended for use in the chemical analysisof all vegetable tanning materials.1.2 The values stated in SI

3、units are to be regarded asstandard. No other units of measurement are included in thisstandard.1.3 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health p

4、ractices and determine the applica-bility of regulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards:2D 4900 Test Method for Lignosulfonates (Sulfite Cellulose)in Tanning ExtractsD 4901 Practice for Preparation of Solution of Liquid Veg-etable Tannin ExtractsD 4902 Test Method

5、for Evaporation and Drying of Ana-lytical SolutionsD 4903 Test Method for Total Solids and Water in VegetableTanning Material ExtractsD 4904 Practice for Cooling of Analytical SolutionsD 4905 Practice for Preparation of Solution of Solid, Pastyand Powdered Vegetable Tannin ExtractsD 6401 Test Method

6、 for Determining Non-Tannins andTannin in Extracts of Vegetable Tanning MaterialsD 6402 Test Method for Determining Soluble Solids andInsolubles in Extracts of Vegetable Tanning MaterialsD 6403 Test Method for Determining Moisture in Raw andSpent MaterialsD 6404 Practice for Sampling Vegetable Mater

7、ials Contain-ing TanninD 6405 Practice for Extraction of Tannins from Raw andSpent MaterialsD 6406 Test Method for Analysis of Sugar in VegetableTanning MaterialsD 6407 Test Method for Analysis of Iron and Copper inVegetable Tanning MaterialsD 6408 Test Method for Analysis of Tannery LiquorsD 6409 P

8、ractice for Color Tests with Sheepskin SkiverD 6410 Test Method for Determining Acidity of VegetableTanning Liquors2.2 ALCA Methods:A1 Analysis of Vegetable Tanning MaterialsGeneral3A5 Extraction of Raw and Spent Materials3A6 Moisture in Raw and Spent Materials3A10 Preparation of Solution of Liquid

9、Extracts3A11 Preparation of Solution of Solid, Pasty, and PowderedExtracts3A12 Cooling of Analytical Solutions3A13 Evaporation and Drying of Analytical Solutions3A20 Total Solids and Water3A21 Soluble Solids and Insolubles3A22 Non-Tannins and Tannin3A25 Analysis of Tannery Liquors3A30 Sugar in Tanni

10、ng Materials3A31 Copper and Iron in Tanning Materials3A40 Color Tests with Sheepskin Skiver3A50 Lignosulfates (Sulfite Cellulose)3A60 Official Certification3J10 Sampling of Vegetable Materials Containing Tannin32.3 Federal SpecificationDD-V-582 Volumetric Apparatus, Glass43. Significance and Use3.1

11、Vegetable tanning materials are natural products con-taining various substances of varying composition, concentra-tion and quality.3.2 The methods referenced are useful for analyzing andtesting vegetable tanning materials for moisture, water-extractable substances, cold-soluble fractions, tannins, n

12、on-tannins, acidity, tanning properties, the color of tanned leather,and the presence or absence of certain admixtures.1This practice is under the jurisdiction ofASTM Committee D31 on Leather andis the direct responsibility of Subcommittee D31.01 on Vegetable Leather Thispractice has been adapted fr

13、om and is a replacement for Method A1 of the OfficialMethods of the American Leather Chemists Association.Current edition approved April 1, 2009. Published July 2009. Originallyapproved in 1989. Last previous edition approved in 1999 as D 489999.2For referenced ASTM standards, visit the ASTM website

14、, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3Official Methods of the American Leather Chemists Association. Availablefrom theAmerican Leather ChemistsAssociati

15、on (ALCA), University of Cincinnati,P.O. Box 210014, Cincinnati, OH 452210014.4Available from Standardization Documents Order Desk, Bldg. 4 Section D, 700Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19

16、428-2959, United States.4. Samples and Specimens4.1 The preparation of the composite sample of a vegetabletanning material for analysis purposes shall be as described inALCA Method J10.5. Apparatus and Reagents5.1 All volumetric glassware shall comply with FederalSpecification DD-V-582.5.2 Unless ot

17、herwise specified, all reagents used in thechemical analyses shall be of certified ACS purity grade andcomply with the specifications recommended by the Commit-tee onAnalytical Reagents of theAmerican Chemical Society.55.3 The distilled water used in the chemical analysis shallhave a pH of not less

18、than 5.5 nor more than 7.0 and shall givea residue of not more than 0.0005 g when 100 mLis evaporatedand dried in a platinum dish.5.4 General laboratory apparatus and reagents shall beavailable. (Special apparatus and reagents are described in theindividual methods.)6. Procedure6.1 Cover all funnels

19、, collecting dishes, and other apparatusused during the analysis so as to prevent, or reduce to aminimum, any change in the concentration of solutions byevaporation of water.6.2 Measure all aliquots of analytical solutions, pipetted forthe determination of total solids, soluble solids, non-tannins,

20、orother, at the same temperature within the range 23 to 25C asspecified in ALCA Methods A21 and A22.7. General Analytical Procedure for the Analysis ofVegetable Tanning Materials7.1 The following ASTM standards are applicable: TestMethods D 4900, D 4902, D 4903, D 6401, D 6402, D 6403,D 6406, D 6407

21、, D 6408, and D 6410, and Practices D 4901,D 4904, D 4905, D 6404, D 6405, and D 6409.7.2 The following ALCA Methods are applicable: A5, A6,A10, A11, A12, A13, A20, A21, A22, A25, A30, A31, A40,A50, A60, J10.8. Keywords8.1 tannin; tannin analysis; vegetable tannin analysis; veg-etable tanninsASTM In

22、ternational takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entire

23、ly their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand s

24、hould be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on S

25、tandards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).5American Chemical Society, 1155 16th St. NW, Washington, DC 20036.D 4899 99 (2009)2