ASTM D5394-2002(2007) Standard Specification for Reclaimed 1 1 1-Trichloroethane《回收的1 1 1-三氯乙烷的标准规范》.pdf

1、Designation: D 5394 02 (Reapproved 2007)Standard Specification forReclaimed 1,1,1-Trichloroethane1This standard is issued under the fixed designation D 5394; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision

2、. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification defines Type I (high quality reclaimed1,1,1-trichloroethane, approximating MIL Specification), TypeII (good qua

3、lity reclaimed solvent), Type III (minimal accept-able reclaimed solvent).1.2 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine

4、 the applica-bility of regulatory limitations prior to use. For a specifichazards statement see Section 4.1.3 1,1,1-trichloroethane also is known commercially asmethyl chloroform.2. Referenced Documents2.1 ASTM Standards:2D 2106 Test Methods for Determination of Amine AcidAcceptance (Alkalinity) of

5、Halogenated Organic SolventsD 2108 Test Method for Color of Halogenated OrganicSolvents and Their Admixtures (Platinum-Cobalt Scale)D 2109 Test Methods for Nonvolatile Matter in Haloge-nated Organic Solvents and Their AdmixturesD 2942 Test Method for Total Acid Acceptance of Haloge-nated Organic Sol

6、vents (Nonreflux Methods)D 2943 Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine StabilityD 2988 Test Methods for Water-Soluble Halide Ion inHalogenated Organic Solvents and Their AdmixturesD 2989 Test Method for Acidity-Alkalinity of HalogenatedOrganic Solvents and Their Admix

7、turesD 3401 Test Methods for Water in Halogenated OrganicSolvents and Their AdmixturesD 3741 Test Methods for Appearance of Admixtures Con-taining Halogenated Organic SolventsD 6806 Practice for Analysis of Halogenated Organic Sol-vents and Their Admixtures by Gas Chromatography2.2 Other Documents:S

8、TP-310A Handbook of Vapor Degreasing3STP-403A Cold Cleaning with Halogenated Solvents43. Properties3.1 Reclaimed 1,1,1-trichloroethane, Type I, shall conformto the requirements of Table 1.3.2 Reclaimed 1,1,1-trichloroethane, Type II, shall conformto the requirements of Table 2. See STP-310A.3.3 Recl

9、aimed 1,1,1-trichloroethane, Type III, shall con-form to the requirements of Table 3. See STP-403A.3.4 This specification does not address the possibility ofproduct flash points due to the presence of flammable constitu-ents. However, flash point must be determined for properlabeling and shipment. T

10、he Tag closed-cup procedure isrecommended.3.5 Specific gravity for these grades typically will bebetween 1.25 and 1.37.4. Hazards4.1 Due to the possible presence of low level foreigncontaminants in reclaimed 1,1,1-trichloroethane, the user iscautioned to use due care in determining the effects of th

11、esecontaminants.1This specification is under the jurisdiction of ASTM Committee D26 onHalogenated Organic Solvents and Fire Extinguishing Agents and is the directresponsibility of Subcommittee D26.02 on Vapor Degreasing.Current edition approved Feb. 1, 2007. Published March 2007. Originallyapproved

12、in 1993. Last previous edition approved in 2002 as D 5394-02.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.

13、3Symposium on Vapor Degreasing, ASTM STP 310A, ASTM.4Symposium on Cold Cleaning With Halogenated Solvents, ASTM STP 403A,ASTM.TABLE 1 Properties, Type IProperty Specification Test MethodAppearance Free of turbidity andsuspended matterD 37411,1,1-trichloroethane, weight %,min92 D 6806Nonvolatile resi

14、due, weight%, max0.0040 D 2109Color, Pt-Co, max 25 D 2108Water, weight %, max 0.015 D 3401Acid acceptance as NaOH, weight%, min0.20 D 2942Aluminum scratch test PassesAD 2943Acidity as HCl, weight %, max 0.001 D 2989Alkalinity as NaOH, weight %, max 0.020 D 2106Halide as Cl, weight %, max 0.0005 D 29

15、88ADistill 100 mL solvent, collect 50 mL distillate, and conduct scratch test ondistillate and portion remaining in distillation flask.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.4.2 1,1,1-trichloroethane should not be handled, s

16、tored,pumped, metered, etc., in aluminum equipment or with alumi-num components. Mixtures with finely divided aluminum orzinc powders should be avoided.5. Keywords5.1 1,1,1-trichloroethane; Types I, II, and III; halogenatedsolvent; methyl chloroform; reclaimedASTM International takes no position res

17、pecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This

18、standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM Intern

19、ational Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown be

20、low.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555

21、 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).TABLE 2 Properties, Type IIProperty Specification Test MethodAppearance Free of turbidity andsuspended matterD 37411,1,1-trichloroethane, weight %,min90 D 6806Nonvolatile residue (NVR), weight%, max0.010 D 2109Color, Pt-C

22、o, max 30 D 2108Water, weight %, max 0.015 D 3401Acid acceptance as NaOH, weight%, min0.20 D 2942Aluminum scratch test PassesAD 2943Acidity as HCl, weight %, max 0.001 D 2989Alkalinity as NaOH, weight %, max 0.020 D 2106Halide as Cl, weight %, max 0.0005 D 2988ADistill 100 mL solvent, collect 50 mL

23、distillate, and conduct scratch test on distillate and portion remaining in distillation flask.TABLE 3 Properties, Type IIIAProperty Specification Test MethodAppearance Free of turbidity andsuspended matterD 37411,1,1-trichloroethane, weight %,min88 D 6806Nonvolatile residue, weight%, max0.020 D 210

24、9Color, Pt-Co, max 50 D 2108Water, weight %, max 0.020 D 3401Acid acceptance as NaOH, weight%, min0.20 D 2942Aluminum scratch test PassesBD 2943Acidity as HCl, weight %, max 0.002 D 2989Alkalinity as NaOH, weight %, max 0.020 D 2106AType III reclaimed 1,1,1-trichloroethane is not recommended for use in precision cleaning or vapor degreasing applications.BDistill 100 mL solvent, collect 50 mL distillate, and conduct scratch test on distillate and portion remaining in distillation flask.D 5394 02 (2007)2