ImageVerifierCode 换一换
格式:PDF , 页数:4 ,大小:81.68KB ,
资源ID:520414      下载积分:10000 积分
快捷下载
登录下载
邮箱/手机:
温馨提示:
快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。 如填写123,账号就是123,密码也是123。
特别说明:
请自助下载,系统不会自动发送文件的哦; 如果您已付费,想二次下载,请登录后访问:我的下载记录
支付方式: 支付宝扫码支付 微信扫码支付   
验证码:   换一换

加入VIP,免费下载
 

温馨提示:由于个人手机设置不同,如果发现不能下载,请复制以下地址【http://www.mydoc123.com/d-520414.html】到电脑端继续下载(重复下载不扣费)。

已注册用户请登录:
账号:
密码:
验证码:   换一换
  忘记密码?
三方登录: 微信登录  

下载须知

1: 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。
2: 试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。
3: 文件的所有权益归上传用户所有。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 本站仅提供交流平台,并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

版权提示 | 免责声明

本文(ASTM D5675-2013 0000 Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders《低分子量PTFE和FEP微粒粉末的标准分类》.pdf)为本站会员(unhappyhay135)主动上传,麦多课文库仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文库(发送邮件至master@mydoc123.com或直接QQ联系客服),我们立即给予删除!

ASTM D5675-2013 0000 Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders《低分子量PTFE和FEP微粒粉末的标准分类》.pdf

1、Designation: D5675 13Standard Classification forLow Molecular Weight PTFE and FEP Micronized Powders1This standard is issued under the fixed designation D5675; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revisi

2、on. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope*1.1 This classification system provides a method of ad-equately identifying low molecular weight polytetrafluoroeth-ylene (PTFE) and

3、 fluorinated ethylene propylene (FEP) mi-cronized powders using a system consistent with that ofClassification System D4000. It further provides a means forspecifying these materials by the use of a simple line calloutdesignation. This classification covers fluoropolymer micron-ized powders that are

4、 used as lubricants and as additives toother materials in order to improve lubricity or to control othercharacteristics of the base material.1.2 These powders are sometimes known as lubricant pow-ders. The powders usually have a much smaller particle sizethan those used for molding or extrusion, and

5、 they generallyare not processed alone. The test methods and propertiesincluded are those required to identify and specify the varioustypes of fluoropolymer micronized powders. Recycled fluo-ropolymer materials meeting the detailed requirements of thisclassification are included (see Guide D7209).1.

6、3 These fluoropolymer micronized powders and the ma-terials designated as filler powders (F) in ISO 12086-1 andISO 12086-2 are equivalent.21.4 The values stated in SI units as detailed in IEEE/ASTMSI-10 are to be regarded as the standard.1.5 This standard does not purport to address all of thesafety

7、 concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use. Specific precau-tionary statements are given in 7.1.2.2. Referenced Document

8、s2.1 ASTM Standards:3D854 Test Methods for Specific Gravity of Soil Solids byWater PycnometerD883 Terminology Relating to PlasticsD1238 Test Method for Melt Flow Rates of Thermoplasticsby Extrusion PlastometerD1600 Terminology forAbbreviated Terms Relating to Plas-ticsD3892 Practice for Packaging/Pa

9、cking of PlasticsD4000 Classification System for Specifying Plastic Materi-alsD4464 Test Method for Particle Size Distribution of Cata-lytic Material by Laser Light ScatteringD4567 Test Method for Single-Point Determination of Spe-cific SurfaceArea of Catalysts and Catalyst Carriers UsingNitrogen Ad

10、sorption by Continuous Flow MethodD4591 Test Method for Determining Temperatures andHeats of Transitions of Fluoropolymers by DifferentialScanning CalorimetryD4895 Specification for Polytetrafluoroethylene (PTFE)Resin Produced From DispersionD7209 Guide for Waste Reduction, Resource Recovery, andUse

11、 of Recycled Polymeric Materials and ProductsD5740 Guide for Writing Material Standards in the Classi-fication FormatIEEE/ASTM SI-10 Standard for Use of the InternationalSystem of Units (SI): The Modern Metric System2.2 ISO Standards:4ISO 12086-1 Plastics-Fluoropolymer Dispersions andMoulding and Ex

12、trusion Materials Part 1: Designation andSystem and Basis for SpecificationISO 12086-2 Plastics-Fluoropolymer Dispersions and1This classification is under the jurisdiction of ASTM Committee D20 onPlastics and is the direct responsibility of Subcommittee D20.15 on ThermoplasticMaterials.Current editi

13、on approved Sept. 1, 2013. Published September 2013. Originallyapproved 1995. Last previous edition approved 2010 as D5675 - 04(2010). DOI:10.1520/D5675-13.2Designations, specifications, and test methods are included in ISO 12086-1 and12086-2.3For referenced ASTM standards, visit the ASTM website, w

14、ww.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.4Available from American National Standards Institute (ANSI), 25 W. 43rd St.,4th Floor, New York, NY 10036, http:/www.

15、ansi.org.*A Summary of Changes section appears at the end of this standardCopyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States1Moulding and Extrusion Materials Part 2: Preparation ofTest Specimens and Determination of Properties3. Terminol

16、ogy3.1 DefinitionsThe terminology given in TerminologyD883 is applicable to this classification unless otherwisespecified.3.1.1 bulk density, nthe mass per unit volume, in gramsper litre of a loosely packed material, such as a moldingpowder. D48953.1.2 lot, none production run or uniform blend of tw

17、o ormore production runs. D48953.2 Definitions of Terms Specific to This Standard:3.2.1 direct polymerization powder, nfluoropolymer ma-terial based on polymerizations designed to produce lowmolecular weight PTFE resins with properties of materialsdescribed in this standard.3.2.2 dispersion-based po

18、wder, nfluoropolymer materialbased on the type of polymerization normally related to theproduction of “paste or coagulated dispersion type” fluoropo-lymer resins.3.2.3 micronized powder, na material comprised of par-ticles reduced in average size to a dimension typically between1 and 100 m.3.2.4 reg

19、round PTFE, nPTFE material produced bygrinding polytetrafluoroethylene (PTFE) material that has beenpreformed but has never been sintered.3.2.5 reprocessed PTFE, nPTFE material produced bygrinding PTFE material that has been both preformed andsintered.3.2.6 sintering, nas it applies to PTFE, a therm

20、al treat-ment during which the PTFE is melted and recrystallized bycooling, with coalescence occurring during the treatment.3.2.7 suspension-based powder, nfluoropolymer materialbased on the type of polymerization normally related to theproduction of granular PTFE resins.3.3 AbbreviationsAbbreviated

21、 terms are in accordancewith Terminology D1600.4. Classification4.1 This classification covers two groups of fluoropolymermicronized powders. Fluoropolymer micronized powders areclassified into groups according to their base fluoropolymer.These groups are further subdivided into classes and grades a

22、sshown in Table 1.NOTE 1An example of this classification system is as follows:The designation ASTM D5675 PTFE0111 indicates PTFE micronizedpowder in accordance with Specification D5675:01 = PTFE resin,1 = suspension polymerization based, and1 = formerly Type I, Grade 1, Class A, inSpecification D56

23、75 - 95awith a particle size of 1 to 1 g/10 min using a load of 5 kg.5. General Requirements5.1 The resin shall be uniform and shall contain no additivesor foreign material.5.2 The color of the material as shipped by the seller shallbe white to gray.TABLE 1 Basic PropertiesGroup Description Class De

24、scription Grade DescriptionParticle Size,AverageDiameter, mSurface Area,m2/gMelt-Flow Rate,Ag/10 minMassB01CPTFE 1 suspension based 1D1to1 52E10 to 25 0.8 to 4.5 0.1 102 dispersion based 1F1to1 52G10 to 30 4.6 to 15 0.1 103H25 to 50 4.6 to 15 1 54I50 to 150 4.6 to 15 1 53 direct polymerization 1J2 t

25、o 15 4.6 to 15 1 54 reground suspension 1K1to1 55 reground dispersion 1L1to25 0.8to4.5 1 56 previously sintered 1M10 to 50 20 502NFEP 1 1O10 to 30 4.6 to 15 4 to 12 5AOrifice diameter of 2.0955 mm and temperature of 372C.BKilogram load on plastometer.CGroup 01 materials have a specific gravity of 2.

26、10 to 2.30 g/cm3, a water content (maximum) of 0.1 %, a melting point (peak temperature) of 315 to 340C, and a bulkdensity of 225 to 600 g/L.DFormerly Specification D567595a, Type I, Grade 1, Class A.EFormerly Specification D567595a, Type I, Grade 1, Class B.FFormerly Specification D567595a, Type I,

27、 Grade 2, Class A.GFormerly Specification D567595a, Type I, Grade 2, Class B.HFormerly Specification D567595a, Type I, Grade 2, Class C.IFormerly Specification D567595a, Type I, Grade 2, Class D.JFormerly Specification D567595a, Type I, Grade 3, Class A.KFormerly Specification D567595a, Type I, Grad

28、e 4, Class A.LFormerly Specification D567595a, Type I, Grade 4, Class B.MFormerly Specification D567595a, Type I, Grade 5, Class A.NGroup 02 materials have a specific gravity of 2.10 to 2.20 g/cm3, a water content (maximum) of 0.1 %, a melting point (peak temperature) of 250 to 280C, and a bulkdensi

29、ty of 200 to 600 g/L.OFormerly Specification D567595a, Type II, Grade 1, Class A.D5675 1326. Sampling6.1 Sampling shall be statistically adequate to satisfy therequirements of 9.4.7. Sample Preparation7.1 Test Samples:7.1.1 For each lot of fluoropolymer micronized powder,collect a suitable sample fo

30、r testing. The sample powder shallbe at the standard laboratory temperature of 23 6 2C (73.4 63.6F) prior to testing.7.1.2 Screen the powder through a No. 10 hand sieve inorder to break up or remove any lumps. (WarningFluoropolymers have the potential to evolve small quantities ofgaseous products wh

31、en heated above 200C (400F). It ispossible that some of these gases will be harmful. Exhaustventilation must consequently be used whenever the resins areheated above this temperature, as they are during the meltingoperations that are part of this classification. Since the tem-perature of burning tob

32、acco exceeds 200C, those workingwith fluoropolymer resins shall ensure that the tobacco is notcontaminated.)8. Test Methods8.1 Melting Characteristics by Thermal Analysis:8.1.1 Significance and UseMost of the PTFE resins thatfall within the scope of this classification have never beenmelted.An excep

33、tion is Group 01 Class 6 micronized powders.However, these micronized powders generally do not havehigher melting peak temperatures upon initial melting thanupon second or subsequent meltings. Except for Group 01Class 4 and 5 powder, melting-peak temperatures cannot beused to determine whether the P

34、TFE resins have been meltedpreviously. Melting peak temperatures are used to determinethe conformance of a micronized powder to the melting peaktemperature requirements given in Table 1 of this classifica-tion.8.1.2 ApparatusUse the apparatus described in TestMethod D4591.8.1.3 ProcedureMeasure the

35、melting peak temperatures inaccordance with the procedures given in Test Method D4591.An initial melting peak temperature above the melting peaktemperature obtained on the second and subsequent melting(defined as the second melting peak temperature) probablyindicates that the PTFE resin is Group 01,

36、 Classes 5 and 6micronized powder. The second melting peak temperatureoccurs at approximately 327C (621F). The difference be-tween the initial and second melting peak temperatures isusually greater than 5C (9F) but might be slightly less. Thereis no significant difference between the initial and sec

37、ondmelting peak temperatures for all of the other fluoropolymermicronized powders. If peak temperatures are difficult todiscern from the curves because the peaks are rounded, straightlines shall be drawn tangent to the sides of the peak. The peaktemperature shall be taken to be where these lines int

38、ersectbeyond the peak.8.2 Melt Flow Rate:8.2.1 Test MethodDetermine the melt flow rate at 372 61C using a modification of the extrusion plastometer de-scribed in Test Method D1238. Measure flow rate using a loadof 5000 or 10000 g.8.2.2 ApparatusThe apparatus shall consist of an extru-sion plastomete

39、r, described in Test Method D1238, modified byuse of corrosion-resistant5alloy for the barrel lining, orifice,orifice securing device, and piston tip.8.2.3 Measurement of Flow RateProceed in accordancewith Test Method D1238 using the appropriate sample weightand testing time from Table 2 of Test Met

40、hod D1238. The testtemperature shall be 372 6 1C and the load of 5000 or 10000g in accordance with Table 1 of this classification.8.3 Specific GravityMeasure specific gravity using theprocedures described in Test Method A of Test Method D854,except use Isopar K6instead of water in order to provide p

41、roperwetting of the powder.8.4 Water Content:8.4.1 Significance and UseThe presence of an excessiveamount of water in fluoropolymer resin has a significantadverse effect on the processing characteristics of the resin andthe quality of the products made using the resin. A sample ofthe powder of known

42、 weight is dried in a vacuum oven in atared aluminum weighing dish. When the powder is dry, it isremoved from the oven, placed in a desiccator, allowed to cool,and then reweighed. The water content is calculated from theweight lost during drying.8.4.2 ApparatusUse the apparatus described in Specific

43、a-tion D4895.8.5 Particle SizeMeasure particle size using the proce-dures described in Test Method D4464, except use methanolinstead of water.8.6 Surface AreaMeasure surface area using the proce-dures described in Test Method D4567, except use a 20-mindegas period at 200C rather than 60 min at 300C.

44、8.7 Bulk DensityMeasure bulk density using the proce-dures described in Specification D4895.9. Inspection and Certification9.1 Inspection and certification of the material supplied withreference to a specification based on this classification systemshall be for conformance to the requirements specif

45、ied herein.9.2 Lot acceptance shall be the basis on which acceptance orrejection of the lot is made. The lot-acceptance inspection shallconsist of particle size determination.9.3 Periodic check inspection with reference to a specifica-tion based on this classification system shall consist of the tes

46、tsfor all requirements of the material under the specification.Inspection frequency shall be adequate to ensure the material iscertifiable in accordance with 9.4.5“Stellite” Grade No. 18, Stellite Division of Cabot Corp., Kokomo, IN 46901,and “Duranickel” No. 301, Huntington Alloy Co., Huntington, W

47、V 25720, havebeen found to be resistant to fluorocarbon resins.6Isopar is available from Exxon Co. and is also used in Specification D4895.D5675 1339.4 Certification shall be that the material was manufacturedby a process in statistical control, sampled, tested, and in-spected in accordance with thi

48、s classification system, and thatthe average values for the lot meet the requirements of thespecification (line callout).9.5 A report of test results shall be furnished when re-quested. The report shall consist of results of the lot acceptanceinspection for the shipment and the results of the most r

49、ecentperiodic-check inspection.10. Packaging and Marking10.1 The provisions of Practice D3892 apply to packaging,packing, and marking of containers for plastic materials.11. Keywords11.1 fluorinated ethylene propylene, FEP; fluoropolymer;line callout; lubricant powder; micronized powder; polytetra-fluoroethylene; PTFESUMMARY OF CHANGESCommittee D20 has identified the location of selected changes to this standard since the last issue(D5675 04(2010) that may impact the use of this standard. (September 1, 2013)(1) The scope of m

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1