1、Designation: D5681 13Standard Terminology forWaste and Waste Management1This standard is issued under the fixed designation D5681; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses i
2、ndicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This terminology contains standard definitions of termsused in the general area of waste and waste management. It isintended to promote understanding by provi
3、ding precise tech-nical definitions of terms used in the standards developed byCommittee D34 and its subcommittees.1.2 Terms used only within an individual standard, andhaving a meaning unique to that standard, may be defined orexplained in the terminology section of that individual stan-dard.1.3 Th
4、is standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2. Referenced Documen
5、ts2.1 ASTM Standards:2D1129 Terminology Relating to WaterD4439 Terminology for GeosyntheticsD4448 Guide for Sampling Ground-Water Monitoring WellsD4547 Guide for Sampling Waste and Soils for VolatileOrganic CompoundsD4646 Test Method for 24-h Batch-Type Measurement ofContaminant Sorption by Soils an
6、d SedimentsD4790 Terminology of Aromatic Hydrocarbons and RelatedChemicalsD4874 Test Method for Leaching Solid Material in a Col-umn ApparatusD5120 Test Method for Inhibition of Respiration in Micro-bial Cultures in the Activated Sludge ProcessD5231 Test Method for Determination of the Compositionof
7、 Unprocessed Municipal Solid WasteD5285 Test Method for 24-Hour Batch-Type Measurementof Volatile Organic Sorption by Soils and Sediments(Withdrawn 2008)3D5368 Test Methods for Gravimetric Determination of TotalSolvent Extractable Content (TSEC) of Solid WasteSamplesD5369 Practice for Extraction of
8、Solid Waste Samples forChemical Analysis Using Soxhlet ExtractionD5468 Test Method for Gross Calorific and Ash Value ofWaste MaterialsD5660 Test Method for Assessing the Microbial Detoxifica-tion of Chemically Contaminated Water and Soil Using aToxicity Test with a Luminescent Marine BacteriumD5679
9、Practice for Sampling Consolidated Solids in Drumsor Similar ContainersD5680 Practice for Sampling Unconsolidated Solids inDrums or Similar ContainersD5743 Practice for Sampling Single or MultilayeredLiquids, With or Without Solids, in Drums or SimilarContainersD5744 Test Method for Laboratory Weath
10、ering of SolidMaterials Using a Humidity CellD5745 Guide for Developing and Implementing Short-TermMeasures or Early Actions for Site RemediationD5746 Classification of Environmental Condition of Prop-erty Area Types for Defense Base Closure and Realign-ment FacilitiesD5759 Guide for Characterizatio
11、n of Coal Fly Ash andClean Coal Combustion Fly Ash for Potential UsesD5792 Practice for Generation of Environmental Data Re-lated to Waste Management Activities: Development ofData Quality ObjectivesD5956 Guide for Sampling Strategies for HeterogeneousWastesD6008 Practice for Conducting Environmenta
12、l Baseline Sur-veysD6044 Guide for Representative Sampling for Managementof Waste and Contaminated MediaD6051 Guide for Composite Sampling and Field Subsam-pling for Environmental Waste Management Activities1This terminology is under the jurisdiction of ASTM Committee D34 on WasteManagement and is t
13、he direct responsibility of Subcommittee D34.94 on Terminol-ogy.Current edition approved Feb. 1, 2013. Published February 2013. Originallyapproved in 1995. Last previous edition approved in 2009 as D5681 09. DOI:10.1520/D5681-13.2For referenced ASTM standards, visit the ASTM website, www.astm.org, o
14、rcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.Copyright ASTM International, 100 Barr Harbor Dr
15、ive, PO Box C700, West Conshohocken, PA 19428-2959. United States1D6063 Guide for Sampling of Drums and Similar Containersby Field PersonnelD6250 Practice for Derivation of Decision Point and Confi-dence Limit for Statistical Testing of Mean Concentrationin Waste Management DecisionsD6270 Practice f
16、or Use of Scrap Tires in Civil EngineeringApplicationsD6311 Guide for Generation of Environmental Data Relatedto Waste Management Activities: Selection and Optimiza-tion of Sampling DesignD6323 Guide for Laboratory Subsampling of Media Relatedto Waste Management ActivitiesD6346 Guide for Accepting,
17、Segregating and PackagingMaterials Collected Through Household Hazardous WasteProgramsD6538 Guide for Sampling Wastewater With AutomaticSamplersD6582 Guide for Ranked Set Sampling: Efficient Estimationof a Mean Concentration in Environmental Sampling(Withdrawn 2012)3D6661 Practice for Field Collecti
18、on of Organic Compoundsfrom Surfaces Using Wipe SamplingD6700 Practice for Use of Scrap Tire-Derived FuelD6759 Practice for Sampling Liquids Using Grab and Dis-crete Depth SamplersD6842 Guide for Designing Cost-Effective Sampling andMeasurement Plans by Use of Estimated Uncertainty andIts Components
19、 in Waste Management Decision-MakingD6956 Guide for Demonstrating and Assessing Whether aChemical Analytical Measurement System Provides Ana-lytical Results Consistent with Their Intended UseD6982 Practice for Detecting Hot Spots Using Point-Net(Grid) Search PatternsE135 Terminology Relating to Anal
20、ytical Chemistry forMetals, Ores, and Related MaterialsE177 Practice for Use of the Terms Precision and Bias inASTM Test MethodsE456 Terminology Relating to Quality and StatisticsE702 Specification for Municipal Ferrous ScrapE708 Specification for Waste Glass as a Raw Material for theManufacture of
21、Glass ContainersE711 Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter (Withdrawn2011)3E828 Test Method for Designating the Size of RDF-3 Fromits Sieve Analysis (Withdrawn 2009)3E850 Guide for Characterization of Inorganic ProcessWastes for Use as Structural FillE8
22、56 Definitions of Terms and Abbreviations Relating toPhysical and Chemical Characteristics of Refuse DerivedFuel (Withdrawn 2011)3E868 Test Methods for Conducting Performance Tests onMechanical Conveying Equipment Used in ResourceRecovery Systems (Withdrawn 2013)3E884 Practice for Sampling Airborne
23、Microorganisms atMunicipal Solid-Waste Processing FacilitiesE889 Test Method for Composition or Purity of a SolidWaste Materials StreamE897 Test Method for Volatile Matter in theAnalysis Sampleof Refuse-Derived Fuel (Withdrawn 2011)3E929 Test Method for Measuring Electrical Energy Require-ments of P
24、rocessing EquipmentE943 Terminology Relating to Biological Effects and Envi-ronmental FateE949 Test Method for Total Moisture in a Refuse-DerivedFuel Laboratory Sample (Withdrawn 2011)3E953 Test Method for Fusibility of Refuse-Derived Fuel(RDF) AshE959 Test Method for Characterizing the Performance
25、ofRefuse Size-Reduction EquipmentE1037 Test Method for Measuring Particle Size Distributionof RDF-5E1138 Terminology for Technical Aspects of Products Li-ability Litigation (Withdrawn 1995)3E1183 Test Method for Air Drying RDF-5 for FurtherAnalysis (Withdrawn 2009)3E1248 Practice for Shredder Explos
26、ion ProtectionE1266 Practice for Processing Mixtures of Lime, Fly Ash,and Heavy Metal Wastes in Structural Fills and OtherConstruction Applications3. Significance and Use3.1 This terminology defines terms and specialized mean-ings of terms in the subject areas of waste and management ofwaste.3.2 Thi
27、s terminology is not intended for subjects other thanwaste and waste management. For terms applicable to othersubject areas, the appropriate terminology standard(s) shouldbe consulted. See the current edition of the Compilation ofASTM Standard Definitions4and the list of terminologystandards cited t
28、herein.3.3 Standards relating to subcategories of waste or wastemanagement may use terms defined more narrowly than thoseincluded here. The more specialized terminology standardsrelating to the applicable specific subcategory, or terms definedwithin individual standards, or both, should be consulted
29、 forthe exact meaning intended within a given standard.3.4 The Thesaurus on Resource Recovery Terminology(Special Technical Publication (STP) 832)5contains manyterms and may be useful for those not listed in terminologystandards. However, a definition in a standard terminologyshall be considered gov
30、erning when the term is used in thesense or meaning defined therein.3.5 Statistical terms are not defined in this terminology tothe extent that the terms, when used regarding waste andmanagement of waste, have the same meanings as in PracticeE177 or Terminology E456.3.6 Regulatory terms are often de
31、veloped by regulatoryagencies for special regulatory purposes and may have techni-cal content or meaning different from terms defined herein.When a regulatory term exists that differs in meaning from a4Compilation of ASTM Standard Definitions, ASTM, 8th edition, 1994.5Thesaurus on Resource Recovery
32、Terminology, ASTM STP 832, ASTM, 1983.D5681 132term given here, the regulatory term should be considered totake precedence for regulatory matters.4. Terminologyaccepts, nthe output stream from a materials separationdevice that contains the highest concentration (purity) of thecomponents that the dev
33、ice is designed to separate.accuracy, ncloseness of a measured value to the true or anaccepted reference or standard value. E135, D6311acid producing potential (AP), nthe potential for a solidmaterial sample to produce acidic effluent, based on thepercent of sulfide contained in that sample as iron-
34、sulfidemineral (for example, pyrite or pyrrhotite). The AP iscommonly converted to the amount of calcium carbonaterequired to neutralize the resulting amount of acidic effluentproduced by the oxidation of contained iron sulfide minerals;it is expressed as the equivalent tons of calcium carbonateper
35、1000 tons of solid material. The AP is therefore calcu-lated by multiplying the percent of sulfide contained in thematerial by a stoichiometric factor of 31.25. D5744action level (AL)the level above or below which will lead tothe adoption of one of two alternative actions. D6956adiabatic calorimeter
36、, na calorimeter that has a jackettemperature adjusted to follow the calorimeter temperatureas closely as possible so as to maintain zero thermal head.D5468air dryinga process of partial drying of RDF-3 to bring itsmoisture content near to equilibrium with the atmosphere inthe room in which the siev
37、ing is to take place. E828air dryinga process of partial drying of RDF to bring itsmoisture content near to equilibrium with the atmosphere inwhich further reduction, division, and characterization of thesample are to take place. In order to bring about theequilibrium, the RDF is usually subjected t
38、o drying undercontrolled temperature conditions ranging from 30 to 40C.E949all season radial, na highway tire designed to meet theweather conditions in all seasons of the year, that meets theRubber Manufacturers Association6definition of a mud andsnow tire. D6700altered tire, na scrap tire which has
39、 been modified so that itis no longer capable of retaining air, holding water, or beingused on a vehicle. D6700analysis, nthe activity to determine the proximate andultimate analysis, fuel value and size specification of TDF.D6700analysis sample, nthe final subsample prepared from theair-dried labor
40、atory sample but reduced in particle size bypassing through a mill with a 0.5 mm (0.02in.) size orsmaller final screen.analysis samplethe final subsample prepared from theair-dried laboratory sample but reduced by passing through amill with a 0.5 mm (0.02 in.) size or smaller final screen.E949analys
41、is of variance (ANOVA), na statistical method ofdecomposing (or breaking down) the total variance andestimating or testing its contributing component variancesfor statistical significance. D6842analytethe constituent to be measured. D6956analytical unit, nthe actual amount of the sample materialanal
42、yzed in the laboratory. D6044applicable or relevant and appropriate requirements(ARAR)those requirements, cleanup standards, standardsof control, and other substantive environmental protectionrequirements, criteria, or limitations promulgated underfederal or state law that show either a direct corre
43、spondenceor address problems or situations sufficiently similar at a siteto show that they are well suited for application. D5745asbestossix naturally occurring fibrous minerals found incertain types of rock formations. Of the six, the mineralschrysotile, amosite, and crocidolite have been most com-
44、monly used in building products. When mined andprocessed, asbestos is typically separated into very thinfibers. Because asbestos is strong, incombustible, andcorrosion-resistant, asbestos was used in many commercialproducts beginning early in this century and peaking in theperiod from World War II i
45、nto the 1970s. When inhaled insufficient quantities, asbestos fibers can cause serious healthproblems. D6008asbestos-containing material (ACM)any material or prod-uct that contains more than 1 % asbestos. D6008as-determined basis, nanalytical data obtained from ananalysis sample after conditioning a
46、nd preparation whichrepresent the numerical values obtained at the particularmoisture and ash level in the sample at the time of analysis.as-received basis, ntest data calculated to the condition ofthe sample as it arrived in the laboratory and before anylaboratory processing or conditioning.ash nth
47、e residue remaining after ignition of a substance asdetermined by definite prescribed methods.DISCUSSIONAsh may not be identical in composition or quantitywith the inorganic substances present in the analysis sample beforeignition.attribute, na quality of samples or a population. D5956,D6311auxiliar
48、y variable, nthe secondary characteristic or mea-surement of interest.DISCUSSIONIn ranked set sampling, information contained in anauxiliary variable is useful for ranking the samples. This ranking maymimic the rankings of the samples with respect to the values of theprimary variable when there is c
49、orrelation between the auxiliaryvariable and the primary variable. Auxiliary information may includevisual inspection, inexpensive quick measurement, knowledge of6Available from Rubber Manufacturers Association (RMA), 1400 K St., NW,Suite 900, Washington, DC 20005, http:/www.rma.org.D5681 133operational history, previous site data, or any other similar information.D6582balanced design, na statistical study where replication ineach of the levels of ANOVA is identical. D6842baling, na method of volume reduction whereby tires arecompressed into bales. D6
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1