ASTM D6440-2010 2500 Standard Terminology Relating to Hydrocarbon Resins《有关烃类树脂的标准术语》.pdf

1、Designation: D6440 10Standard Terminology Relating toHydrocarbon Resins1This standard is issued under the fixed designation D6440; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses i

2、ndicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 The hydrocarbon resin industry continues to evolvefrom a source of replacement products for naturally-derivedmaterials to industrial materials that have no na

3、turally-derivedcounterparts. Along with this changing character of the indus-try, various manufacturing participants have introduced termsthat have led to confusion among both manufacturers andconsumers. This terminology standard is intended to alleviatethat confusion and promote standard usage of t

4、erms in thehydrocarbon resin industry.1.2 Resins derived principally from natural terpene fractionsare under the jurisdiction of D01.34.2. Terminology2.1 Definitions:C5aliphatic resin, na resin produced by the cationicpolymerization of a low-boiling aliphatic steam-crackerfraction.DISCUSSIONThe prin

5、cipal monomers are typically cis- and trans-piperylene (1,3pentadiene).C9aromatic resin, na resin produced by the cationicpolymerization of heavy aromatic steam-cracker or coal-tarfractions.DISCUSSIONThe C9designation is broad and may include styrene,indene, methylstyrenes, and methylindenes. Depend

6、ing on the sourceof the C9fraction, it may also include coumarone and dicyclopentadi-ene.cloud point, nthe temperature at which a defined liquidmixture, under controlled cooling, produces perceptible hazeor cloudiness due to the formation of fine particles of anincompatible material.dicyclopentadien

7、e resin, na resin produced by the thermalpolymerization of a concentrated dicyclopentadiene stream.hydrocarbon resin, nin the context of such applications asadhesives, inks, coatings, flooring and roofing formulations,and rubber processing aids, a thermoplastic, low-molecular-weight, amorphous polym

8、er that is either mined, or made bypolymerization primarily from one or more of the following:certain steam-cracked petroleum fractions, coal-tar fractions,terpene fractions, and streams rich in unsaturated monomersthat typically have five or more carbon atoms.DISCUSSIONTypical hydrocarbon resins ar

9、e brittle solids at roomtemperature, chemically similar semi-solid and liquid materials areincluded by association. This term also covers derivatives of hydrocar-bon resins.hydrogenated resin, na resin that has been subjected tosome degree of reaction with hydrogen to decrease the levelof residual u

10、nsaturation.natural resin, na resin of vegetable or animal origin.DISCUSSIONThis term includes rosins, wood extracts or papermanufacturing by-products, fossil resins, mined resin, secretion prod-ucts from insects, and their main derivatives. In the context ofhydrocarbon resins, this refers to mined

11、bituminous resins.polyterpene resin, na resin produced by the polymerizationof terpene fractions or mixtures of terpenes obtained fromnaval stores, or paper pulp production, or citrus juiceproduction, or combinations thereof.DISCUSSIONTerpene fractions can be derived from gum turpentine,wood turpent

12、ine, or sulfate turpentine; citrus juice production yields ad-limonene fraction as an extract of the peel.pure monomer resin, na resin produced by the polymeriza-tion of essentially pure compounds such as styrene, one ofthe methylstyrenes, or controlled mixtures of pure mono-mers.re-mass, vto form d

13、uring storage, massive blocks of resinsfrom particulate forms, such as flakes, pastilles, or powder.DISCUSSIONRe-massing can occur with all resins but is influencedby storage temperature, and pressure, due to stacking; the lowersoftening point resins re-mass at lower temperatures. Particle sizedistr

14、ibution can also have a significant effect.reinforcing resin, na resin that associates with the aromaticblocks of block co-polymers and raises the upper servicetemperature of an adhesive blend.1This terminology is under the jurisdiction of ASTM Committee D01 on Paintand Related Coatings, Materials,

15、and Applications and is the direct responsibility ofSubcommittee D01.16 on Terminology.Current edition approved Dec. 1, 2010. Published December 2010. Originallyapproved in 1999. Last previous edition approved in 2005 as D6440 05. DOI:10.1520/D6440-10.1Copyright ASTM International, 100 Barr Harbor D

16、rive, PO Box C700, West Conshohocken, PA 19428-2959, United States.tackifying resin, na resin, which when mixed with certaincompatible polymers, imparts tack, under use conditions, tothe finished formulation.3. Keywordshydrocarbon resin; terminologyThis standard is subject to revision at any time by

17、 the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will recei

18、ve careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM Inter

19、national, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).D6440 102