1、Designation: D 6709 06An American National StandardStandard Test Method forEvaluation of Automotive Engine Oils in the Sequence VIIISpark-Ignition Engine (CLR Oil Test Engine)1This standard is issued under the fixed designation D 6709; the number immediately following the designation indicates the y
2、ear oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.INTRODUCTIONThis test method can be used by any properly equippe
3、d laboratory without outside assistance.However, the ASTM Test Monitoring Center (TMC)2offers a very valuable service to the testlaboratory; the Center provides reference oils and an assessment of the test results obtained on thoseoils by the laboratory (see Appendix X1). By this means, the laborato
4、ry will know whether their useof the test method gives results statistically similar to those obtained by other laboratories.Furthermore, various agencies require that a laboratory utilize the TMC services in seekingqualification of oils against specifications. For example, the American Petroleum In
5、stitute (API)imposes such a requirement, in connection with several engine lubricating oil specifications.Accordingly, this test method is written for use by laboratories that utilize the TMC services.Laboratories that choose not to use those services may simply ignore those portions of the test met
6、hodthat refer to the TMC.This test method may be modified by means of Information Letters issued by the TMC. In addition,the TMC may issue supplementary memoranda related to the test method (see Annex A3).1. Scope1.1 This test method covers the evaluation of automotiveengine oils (SAE grades 5W, 10W
7、, 20, 30, 40, and 50, andmultiviscosity grades) intended for use in spark-ignition gaso-line engines. The test procedure is conducted using a carbu-reted, spark-ignition Cooperative Lubrication Research (CLR)Oil Test Engine (also referred to as the Sequence VIII testengine in this test method) run o
8、n unleaded fuel. An oil isevaluated for its ability to protect the engine and the oil fromdeterioration under high-temperature and severe service con-ditions. The test method can also be used to evaluate theviscosity stability of multiviscosity-graded oils. Companiontest methods used to evaluate eng
9、ine oil performance forspecification requirements are discussed in the latest revisionof Specification D 4485.1.2 Correlation of test results with those obtained in auto-motive service has not been established. Furthermore, theresults obtained in this test are not necessarily indicative ofresults th
10、at will be obtained in a full-scale automotive spark-ignition or compression-ignition engine, or in an engineoperated under conditions different from those of the test. Thetest can be used to compare one oil with another.1.3 The values stated in SI units are to be regarded asstandard, except for (1)
11、 volume which is given in the metric,but non-SI, litre, (2) certain tube measurements which aregiven in inch-pound units, (3) cylinder bore and stroke in bothSI and inch-pound units (the inch-pound being the standard)and (4) piston displacement given in metric (non-SI) andinch-pound units (the inch-
12、pound being the standard). Inrespect to (3) and (4) the inch-pound units are shown first andthe SI units in parentheses.1.4 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-pr
13、iate safety and health practices and determine the applica-bility of regulatory limitations prior to use. Specific precau-tionary statements are provided throughout this test method.1.5 This test method is arranged as follows:Subject SectionIntroductionScope 11This test method is under the jurisdict
14、ion of ASTM Committee D02 onPetroleum Products and Lubricants and is the direct responsibility of SubcommitteeD02.B0 on Automotive Lubricants.Current edition approved May 1, 2006. Published May 2006. Originallyapproved in 2001. Last previous edition approved in 2005 as D 670905.2Until the next revis
15、ion of this test method, the ASTM Test Monitoring Centerwill update changes in this test method by means of Information Letters. Informa-tion Letters may be obtained from the ASTM Test Monitoring Center, 6555 PennAvenue, Pittsburgh, PA 15202-4489, Attention: Administrator. This edition incor-porates
16、 revisions in all Information Letters through No. 05-1.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.Referenced Documents 2Terminology 3Summary of Test Method 4Before Test Starts 4.1Power Section Installation 4.2Engine Operation (B
17、reak-in) 4.3Engine Operation (Test/Samples) 4.4Stripped Viscosity 4.5Test Completion (BWL) 4.6Significance and Use 5Evaluation of Automotive oils 5.1Stay in Grade Capabilities 5.2Correlation of Results 5.3Use 5.4Apparatus 6Test Engineering, Inc. 6.1Fabricated or Specially Prepared Items 6.2Instrumen
18、ts and Controls 6.3Procurement of Parts 6.4Reagents and Materials 7Reagents 7.1Cleaning Materials 7.2Expendable Power Section-Related Items 7.3Power Section Coolant 7.4Reference Oils 7.5Test Fuel 7.6Test Oil Sample Requirements 8Selection 8.1Inspection 8.2Quantity 8.3Preparation of Apparatus 9Test S
19、tand Preparation 9.1Conditioning Test Run on Power Section 9.2General Power Section Rebuild Instructions 9.3Reconditioning of Power Section After Each Test 9.4Calibration 10Power Section and Test Stand Calibration 10.1Instrumentation Calibration 10.2Calibration of AFR Measurement Equipment 10.3Calib
20、ration of Torque Wrenches 10.4Engine Operating Procedure 11Run-In and Flush 11.1Test Operating Conditions 11.2Air-Fuel Ratio and Spark Advance 11.3Air, Off-Gas and Blowby Measurement 11.4Unscheduled Shutdowns 11.5Oil Sampling and Oil Addition 11.6Periodic Measurements 11.7Final Oil Drain and Oil Con
21、sumption Computation 11.8Operational Validity Criteria 11.9Test Completion 11.10Determination of Test Results 12Oil Analysis 12.1Test Bearing Weight Loss Determination 12.2Report 13Precision and Bias 14Precision 14.1Bias 14.2Use of ASTM Rounding 15Keywords 16ANNEXESMeasurement of Connecting Rod Bear
22、ing Clearance andJournal TaperAnnex A1Measurement of Main Bearing Clearance Annex A2The ASTM Test Monitoring Center Calibration Program Annex A3Measurement of Piston-to-Sleeve Clearance Annex A4Control Chart Technique for a Laboratorys SeverityAdjustment (SA)Annex A5Recommended New Liner Honing Proc
23、edure Annex A6Sequence VIII Oil Priming Procedure Annex A7Alternative Crankcase Breather Configuration Annex A8Connecting Rod Bearing Cleaning Procedure Annex A9Electronic Ignition Conversion Annex A10System Response Procedure Annex A11Air-Fuel Ratio Measurement Annex A12Lead Decontamination Procedu
24、re Annex A13Stay-in-Grade Oil Analysis Procedure Annex A14Crankshaft Rear Seal Conditioning Annex A15Report Forms and Data Dictionary Annex A16Test Fuel Specification Annex A17APPENDIXESRole of the ASTM Test Monitoring Center and the CalibrationProgramAppendix X1Suggested Method for Salvaging Camsha
25、ft Bearing Journals Appendix X2Data Log Sheets Appendix X32. Referenced Documents2.1 ASTM Standards:3D86 Test Method for Distillation of Petroleum Products atAtmospheric PressureD 130 Test Method for Corrosiveness to Copper fromPetroleum Products by Copper Strip TestD 235 Specification for Mineral S
26、pirits (Petroleum Spirits)(Hydrocarbon Dry Cleaning Solvents)D 240 Test Method for Heat of Combustion of LiquidHydrocarbon Fuels by Bomb CalorimeterD 323 Test Method for Vapor Pressure of Petroleum Prod-ucts (Reid Method)D 381 Test Method for Gum Content in Fuels by JetEvaporationD 445 Test Method f
27、or Kinematic Viscosity of Transparentand Opaque Liquids (the Calculation of Dynamic Viscos-ity)D 525 Test Method for Oxidation Stability of Gasoline(Induction Period Method)D 1319 Test Method for Hydrocarbon Types in LiquidPetroleum Products by Fluorescent Indicator AdsorptionD 2422 Classification o
28、f Industrial Fluid Lubricants byViscosity SystemD2699 Test Method for Research Octane Number ofSpark-Ignition Engine FuelD 2700 Test Method for Motor Octane Number of Spark-Ignition Engine FuelD 3231 Test Method for Phosphorus in GasolineD 3237 Test Method for Lead In Gasoline By AtomicAbsorption Sp
29、ectroscopyD 3343 Test Method for Estimation of Hydrogen Content ofAviation FuelsD 4052 Test Method for Density and Relative Density ofLiquids by Digital Density MeterD 4294 Test Method for Sulfur in Petroleum Products byEnergy-Dispersive X-Ray Fluorescence SpectroscopyD 4485 Specification for Perfor
30、mance of Engine OilsD 4815 Test Method for Determination of MTBE, ETBE,TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alco-hols in Gasoline by Gas ChromatographyD5119 Test Method for Evaluation of Automotive EngineOils in the CRC L-38 Spark-Ignition EngineD 5302 Test Method for Evaluation of Engine
31、Oils forInhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasolineand Operated under Low-Temperature, Light-Duty Condi-tions3For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For
32、Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.D6709062D 5533 Test Method for Evaluation of Automotive EngineOils in the Sequence IIIE, Spark-Ignition EngineD 5844 Test Method for Evaluation of Engine Oils forInhibition of Rusting (Se
33、quence IID)D 6202 Test Method for Automotive Engine Oils on theFuel Economy of Passenger Cars and Light-Duty Trucks inthe Sequence VIA Spark-Ignition EngineE29 Practice for Using Significant Digits in Test Data toDetermine Conformance with SpecificationsE 191 Specification for Apparatus For Microdet
34、erminationof Carbon and Hydrogen in Organic and Organo-MetallicCompounds2.2 SAE Standards:4J183, Engine Oil Performance and Engine Service Classifi-cation (Other Than “Energy-Conserving”)J304, Engine Oil Tests3. Terminology3.1 Definitions:3.1.1 air-fuel ratio, nin internal combustion engines, themas
35、s ratio of air-to-fuel in the mixture being induced into thecombustion chambers. D 62023.1.2 automotive, adjdescriptive of equipment associatedwith self-propelled machinery, usually vehicles driven byinternal combustion engines. D 44853.1.3 blind reference oil, na reference oil, the identity ofwhich
36、 is unknown by the test facility.3.1.3.1 DiscussionThis is a coded reference oil that issubmitted by a source independent from the test facility.D 58443.1.4 blowby, nin internal combustion engines, the com-bustion products and unburned air-and-fuel mixture that enterthe crankcase. D 53023.1.5 critic
37、al parts, nthose components used in the testthat are known to affect test severity.3.1.6 noncompounded engine oil, na lubricating oil hav-ing a viscosity within the range of viscosities of oils normallyused in engines, and that may contain anti-foam agents or pourdepressants, or both, but not other
38、additives. D51193.1.6.1 DiscussionIn this test method noncompounded oilis also known as build-up oil. This discussion does not appearin Test Method D 5119.3.1.7 non-standard test, na test that is not conducted inconformance with the requirements in the standard testmethod; such as running on an unca
39、librated test stand, usingdifferent test equipment, applying different equipment assem-bly procedures, or using modified operating conditions.D 58443.1.8 test start, nintroduction of test oil into the engine.D 55333.1.9 wear, nthe loss or relocation of material from asurface.3.1.9.1 DiscussionWear g
40、enerally occurs between twosurfaces moving relative to each other, and is the result ofmechanical or chemical action or by a combination of me-chanical and chemical actions. D 53023.2 Definitions of Terms Specific to This Standard:3.2.1 accessory case, nthe mounting base containing thebalancing mech
41、anism, flywheel, and final driveshaft for thepower section of the CLR engine.3.2.1.1 DiscussionThis definition was modified to em-brace the CLR engine. The definition in Test Method D5119embraces the L-38 engine.3.2.2 build-up oil, nsee 3.1.6, noncompounded engine oil.3.2.3 calibrated power section/
42、test stand combination,none that has completed an operationally valid reference oiltest within the previous six months, the results of which fallwithin industry severity and precision limits as published bythe TMC.3.2.4 conditioning test run, na full-length Sequence VIIItest using a TMC-designated r
43、eference oil in a new or newlyrebuilt power section to prepare the cast iron parts beforeconducting routine standard tests with the power section.3.2.5 emergency shutdown, nthe procedure for turning offthe engines ignition without using the prescribed enginecool-down period.3.2.6 full-length test, n
44、a test of an engine oil conductedusing a power section and a test stand that runs 412-h run-in,2-h flush and 40 h at test conditions. (See 10.1.3.1, exceptionfor 10-h stay in grade test).3.2.7 new power section, nan engine power section con-sisting of either a new crankcase or complete power section
45、that has no previous oil test history.3.2.8 off-gas, ngas exiting the power section crankcasebreather.3.2.9 off-test time, nany time that the engine is notoperating at the prescribed test conditions.3.2.10 oil gallery side cover plate, ncrankcase cover platethat contains the oil gallery and provisio
46、n for mounting anddriving the oil pump and ignition assembly.3.2.11 operationally valid test, nan engine oil test that hasbeen conducted in accordance with the conditions listed in thistest method.3.2.12 power section, nthe combination of the crankcaseassembly, the cylinder block assembly, and the c
47、ylinder headassembly, all of which are attached to the accessory case.3.2.13 reconditioned power section, nan engine powersection which has been disassembled, cleaned, and reas-sembled according to the detailed procedures5after completionof either a conditioning test run or a full-length CLR engine
48、oiltest.3.2.14 reference oil test, na standard Sequence VIIIengine oil test of a reference oil designated by the TMC,conducted to ensure that power section and test stand severityfalls within industry limits.3.2.15 run-in and flush, nthe initial 412-h operation of anew, rebuilt, or reconditioned pow
49、er section at the beginning ofeither a conditioning test run or a full-length test.4Available from Society of Automotive Engineers, Inc., 400 CommonwealthDrive, Warrendale, PA 15096. Request SAE Handbook Vol 3. This standard is notavailable separately.5Refer to Instructions for Assembly and Disassembly of the CLR Oil TestEngine, available from Test Engineering, Inc., 12718 Cimarron Path, San Antonio,TX 78249.D67090633.2.16 scheduled downtime, noff-test time that is specifi-cally allowed to include warm-up and cool-down periods aswell as shutdown and in
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1