ASTM E1048-1988(2005) Standard Specification for Color-Coding Pipets or Containers Coated With Anticoagulants《抗凝剂涂覆的彩色编码吸管或容器的标准规范》.pdf

1、Designation: E 1048 88 (Reapproved 2005)Standard Specification forColor-Coding Pipets or Containers Coated WithAnticoagulants1This standard is issued under the fixed designation E 1048; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revisio

2、n, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification covers a system to identify the anti-coagulants used in coating pipets or container

3、s not exceeding 1mL in volume.1.2 The purpose of this specification is to ensure that if acolor code is used with an anticoagulant, all manufacturers willbe encouraged to use the same code; it is not intended torequire color coding.2. Color Code2.1 The color coding used to identify the anticoagulant

4、 usedin coating the pipets shall be in accordance with Table 1.2.2 Variations in the enamels used and in the methods ofapplication appropriate for pipets made from different types ofglass inevitably result in minor variations of color, and it istherefore not appropriate to specify more closely the c

5、olorsmentioned in the table.3. Dimensions and Permissible Variations3.1 The color code shall consist of a color band 1-3 mmwide which shall completely encircle the pipet in a planeperpendicular to its longitudinal axis.3.2 The location of the color code shall not be more than 20mm from the top of th

6、e pipet.3.3 If other color code bands are used to indicate capacity,they shall be 2-6 mm wide. The anticoagulant color code bandshould be separated with a space of at least 5 mm. The colorcode band indicating the anticoagulant should be closest to thetop of the pipet.4. Keywords4.1 anticoagulants; c

7、olorcoding; pipetsASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement o

8、f such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for

9、additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known t

10、o the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at

11、 the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).1This specification is under the jurisdiction of ASTM Committee E41 onLaboratory Apparatus and is the direct responsibility of Subcommittee E41.01 onApparatus.Curr

12、ent edition approved May 1, 2005. Published October 2005. Originallyapproved in 1985. Last previous edition approved in 1999 as E 1048 88(1999)e1.TABLE 1 Anticoagulant Color Code IdentificationAnticoagulant Color Code BandAmmonium Heparin RedSodium Heparin GreenLithium Heparin1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.