ASTM E1120-1997(2002) Standard Specification for Liquid Chlorine《液氯》.pdf

1、Designation: E 1120 97 (Reapproved 2002)Standard Specification forLiquid Chlorine1This standard is issued under the fixed designation E 1120; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in pa

2、rentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the Department of Defense.1. Scope1.1 This specification covers industrial grade chlorine nor-mally ava

3、ilable as a liquid in pressurized metal containers.2. Referenced Documents2.1 ASTM Standards:E 410 Test Method for Moisture and Residue in LiquidChlorine2E 1746 Test Method for Sampling and Analysis of LiquidChlorine for Gaseous Impurities22.2 Federal Documents:Federal Specification PPP-C-2020, Chem

4、icals, Liquid, Dry,and Paste, Packaging of3Title 49 CFR, Department of Transportation, Parts 100 to1994Title 40 CFR, Protection of the Environment, Parts 162 to1804Title 29 CFR, Labor, Part 1910.1200, New Requirements asto Container Labeling, Occupational Safety and HealthAdministration (OSHA)43. Ch

5、emical Requirements3.1 Liquid chlorine shall conform to the following require-ments:ASTMMethodGaseous impurities, % by vol 0.5 max E 1746Moisture, % by weight 0.015 max E 410Nonvolatile material, % by weight 0.015 max E 4104. Sampling4.1 Sample liquid chlorine in accordance with the appropri-ate sec

6、tions of Test Method E 1746.5. Packaging and Package Marking5.1 Package and label industrial and commercial quantitiesin accordance with Department of Transportation CFR Title 49Part 100 to 199, and state and local regulations.5.2 When specified, Department of Defense Procurementsshall be packaged a

7、nd labeled in accordance with the appli-cable paragraphs of Federal Specification PPP-C-2020.5.3 Label chlorine to be used as a pesticide in accordancewith the applicable regulations of the Environmental ProtectionAgency as described in CFR Title 40, Parts 162 to 180.5.4 Labeling also must comply wi

8、th OSHA regulationsdescribed in CFR Title 29 Part 1910 and Section 1910.1200 aspublished in 48 Federal Register 53280.6. Keywords6.1 chlorine; liquid1This specification is under the jurisdiction of ASTM Committee E15 onIndustrial and Specialty Chemicals and is the direct responsibility of Subcommitt

9、eeE15.02 on Product Standards.Current edition approved Oct. 10, 2002. Published February 2003. Originallyapproved in 1986. Last previous edition approved in 1997 as E 1120 97.2Annual Book of ASTM Standards, Vol 15.05.3Single copies of Federal Specifications required for bidding purposes areavailable

10、 from General ServicesAdministration Business Service Centers in Boston,New York, Washington, DC, Philadelphia, Atlanta, Chicago, Kansas City, MO, FortWorth, Houston, San Francisco, Los Angeles, and Seattle, WA.4The Code of Federal Regulations may be obtained from the Superintendent ofDocuments, U.S

11、. Government Printing Office, Washington, DC 20402.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin thi

12、s standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be

13、 reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresp

14、onsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, We

15、st Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).E 1120 97 (2002)2