ASTM E1519-2006ae1 Standard Terminology Relating to Agricultural Tank Mix Adjuvants《与农用蓄水池混合辅药相关的标准术语》.pdf

1、Designation: E 1519 06ae1Standard Terminology Relating toAgricultural Tank Mix Adjuvants1This standard is issued under the fixed designation E 1519; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A numbe

2、r in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.e1NOTEThe term “basic blend” was editorially corrected and other corrections were made throughout in September 2006.1. Scope1.1 This terminology is use

3、d or is likely to be used in testmethods, specifications, guides, and practices related to agri-cultural tank mix adjuvants.1.2 These definitions are written to ensure that standardsrelated to agricultural tank mix adjuvants are properly under-stood and interpreted.2. Referenced Documents2.1 ASTM St

4、andards:2D 459 Terminology Relating to Soap and Other DetergentsD 483 Test Method for Unsulfonated Residue of PetroleumPlant Spray OilsE 609 Terminology Relating to PesticidesD 2140 Test Method for Carbon-Type Composition of In-sulating Oils of Petroleum Origin3. Terminology3.1 Terms and Definitions

5、:absorptiona process in which one material (the absorbent)takes in and retains another (the absorbate).acidifiera material that can be added to spray mixtures tolower the pH.activatora material that increases the biological efficacy ofagrichemicals.active ingredienta component of the formulation tha

6、t pro-duces a specific effect for which the formulation is designed.adjuvanta material added to a tank mix to aid or modify theaction of an agrichemical, or the physical characteristics ofthe mixture.alkalinity agenta material that can be added to the spraymixture to raise the pH.amphoteric surfacta

7、nta surface-active agent capable offorming, in aqueous solution, either surface-active anions orsurface-active cations depending on the pH.anionic surfactanta surface-active agent in which the activeportion of the molecule containing the lipophilic segmentforms exclusively a negative ion (anion) whe

8、n placed inaqueous solution.antifoaming agenta material used to inhibit or prevent theformation of foam.attractanta material that attracts specific pests.basic blenda combination of wetting agent and bufferingagent that maintains a pH of the spray mixture greater than7.buffer or buffering agenta com

9、pound or mixture that, whencontained in solution, causes the solution to resist change inpH. Each buffer has a characteristic limited range of pH overwhich it is effective.canopy penetrating agentan adjuvant that increases thepenetration of the spray material into the crop canopy. Seedeposition aid.

10、cationic surfactanta surface-active agent in which theactive portion of the molecule containing the lipophilicsegment forms exclusively a positive ion (cation) whenplaced in aqueous solution.coloranta material used to alter the color of the tank patibility agenta surface-active agent that allows sim

11、ul-taneous application of liquid fertilizer and agrichemical, ortwo or more agrichemical formulations, as a uniform tankmix, or improves the homogeneity of the mixture and theuniformity of the application.crop oil concentratean emulsifiable petroleum oil-basedproduct containing 15 to 20 % w/w surfac

12、tant and a mini-mum of 80 % w/w phytobland oil.crop oil (emulsifiable)an emulsifiable petroleum oil-basedproduct containing up to 5 % w/w surfactant and theremainder of a phytobland oil.crop oil (non-emulsifiable)See phytobland oil.defoaming agenta material that eliminates or suppressesfoam in the s

13、pray tankdeposition aida material that improves the ability of ag-richemical sprays to deposit on targeted surfaces.1This terminology is under the jurisdiction of ASTM Committee E35 onPesticides and Alternative Control Agents and is the direct responsibility ofSubcommittee E35.22 on Pesticide Formul

14、ations and Delivery Systems.Current edition approved June 1, 2006. Published June 2006. Originallyapproved in 1993. Last previous edition approved in 2006 as E 1519 06.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual

15、 Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.dormant oila horticultural spray oil applied during thedormant phase of the ta

16、rgeted plant. (See horticulturalspray oil.)drift control agenta material used in liquid spray mixturesto reduce spray drift.drift reduction agentSee drift control agent.emulsifiera surfactant that promotes the suspension of oneimmiscible liquid in another.esterified seed oila modified seed oil where

17、in the fatty acidsare esterified with an alcohol (such as methyl or ethyl).evaporation reduction agenta material that reduces theevaporation rate of a spray mix during or after application, orboth.extendera material that increases the effective life of anagrichemical after application.foam suppressa

18、ntSee defoamer.foaming agenta material that increases the volume orstability of the foam formed in a spray mixture.foliar retention agenta substance that increases the timeand agrichemical remains in the targeted foliar zone.functioning agenta component of the formulation thatproduces a specific eff

19、ect for which the formulation isdesigned.high surfactant oil concentratean emulsifiable oil basedproduct containing 2550% w/w surfactant an a minimum of50% w/w oil.humectanta material which increases the equilibrium watercontent and increases the drying time of an aqueous spraydeposit.modified veget

20、able oilan oil, extracted from seeds, that hasbeen chemically modified (for example, methylated).modified vegetable oil concentratean emulsifiable, chemi-cally modified vegetable oil product containing 5 to 20 %w/w surfactant and the remainder chemically modifiedvegetable oil.naphtha-based oila petr

21、oleum oil containing a majority ofthe naphtha fraction.nonionic surfactanta surface-active agent having no ioniz-able polar end groups but comprised of hydrophilic andlipophilic segments.oilSee petroleum, vegetable, paraffinic, and so forth.paraffinic oila petroleum oil (derived from paraffin crudeo

22、il) whose paraffinic carbon type content is typically greaterthan 60 %. D 2140penetranta material that enhances the ability of an ag-richemical to enter a substrate or penetrate a surface.petroleum oiloil derived from petroleum; contains a mixtureof hydrocarbons that are broadly classified as paraff

23、ins,napthenes, aromatics, or other unsaturates, or combinationthereof.phytobland oila highly refined paraffinic material with aminimum unsulfonated residue of 92 % v/v. D 483rainfastness agenta material which improves rainfastness.E 609silicone surfactanta surface active agent in which at least75 %

24、(by weight) is derived from organically modifiedsilicone.soil retention agenta substance that increases the time anagrichemical or water remains in the targeted soil zone.spreadera material which increases the area that a droplet ofa given volume of spray mixture will cover on a target.spreader/stic

25、kera material that has the properties of both aspreader and a sticker.stickera material that assists the spray deposit to adhere tothe target in terms of resistance to wind, water, mechanicalaction.surface-active agenta material that when added to a liquidmedium modifies the properties of the medium

26、 at a surfaceor interface. D 459NOTE 1Surface-active agent is the general term which includessoluble detergents in liquid medium, dispersing agents, emulsifyingagents, foaming agents, penetrating agents, and wetting agents.surfactantSee surface-active agent.vegetable oiloil extracted from seeds; typ

27、ically those ofcorn, cotton, peanut, rapeseed, sunflower, canola, or soy-bean.vegetable oil concentratean emulsifiable vegetable oilproduct containing 5 to 20 % w/w surfactant and a minimumof 80 % w/w vegetable oil.water conditioning agenta material that reduces or elimi-nates the antagonism between

28、 a pesticide formulation andions present in the water that is utilized in a pesticideapplication.wetting agentwetting agents can be considered synonymouswith spreaders in function.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five

29、years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical com

30、mittee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).E 1519 06ae12