ASTM F1073-1987(2012) Standard Specification for Door Fittings for Watertight Gastight Airtight Weathertight and Non-Tight Doors for Marine Use《船用水密 气密 不透气 防风雨和无夹扣门的门配件的标准规范》.pdf

1、Designation: F1073 87 (Reapproved 2012) An American National StandardStandard Specification forDoor Fittings, for Watertight /Gastight /Airtight,Weathertight, and Non-Tight Doors, for Marine Use1This standard is issued under the fixed designation F1073; the number immediately following the designati

2、on indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification covers the princ

3、ipal design and typeof material for manufacturing fittings for watertight/gastight/airtight, weathertight, and non-tight doors, for marine use. Notethat “gastight” is commercial terminology which also means“airtight” in naval terminology.1.2 The fittings are intended for use on all doors for marineu

4、se, except joiner and expanded metal doors.2. Referenced Documents2.1 ASTM Standards:2A36/A36M Specification for Carbon Structural SteelA240/A240M Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for PressureVessels and for General ApplicationsA276 Specification

5、 for Stainless Steel Bars and ShapesA563 Specification for Carbon and Alloy Steel NutsA668/A668M Specification for Steel Forgings, Carbon andAlloy, for General Industrial UseB140/B140M Specification for Copper-Zinc-Lead (RedBrass or Hardware Bronze) Rod, Bar, and ShapesB210 Specification for Aluminu

6、m and Aluminum-AlloyDrawn Seamless Tubes2.2 Military Standards:3MIL-P-24441 Epoxy-Polyamide PaintMIL-P-17578A Packing Material, Plastic (for Dogs for Wa-tertight Closures) (Symbol 1425)MIL-C-81706 Coating, Aluminum and Aluminum AlloysDOD-STD-2138 Metal Sprayed Coating Systems for Corro-sion Protecti

7、on2.3 Federal Specifications:3QQ-C-390 Copper Alloy CastingsTT-E-490 Enamel-Silicone Alkyd Copolymer, Semi-gloss,Exterior2.4 ANSI Standard:A2.6 Standard for Fire Tests of Window Assemblies42.5 AISI Standard:316 Low Alloy Stainless Steel (Cres 316)53. Classification3.1 The dogs and hinges shall be cl

8、assified as given in Table1.4. Ordering Information4.1 Ordering for fittings shall be indicated on the purchaseorder prepared for doors, with reference to this specificationnoted.4.2 When ordering fittings, indicate the following:4.2.1 Type,4.2.2 Quantity,4.2.3 Marking (see Section 8), and4.3 Inspec

9、tion and acceptance of fittings shall be agreedupon between the purchaser and the supplier.5. Materials and Manufacture5.1 The material shall be as specified in Tables 2-4.5.2 All securing screws and fasteners shall be of stainlesssteel, Type 316.5.3 All glazing in portlights of fire door shall meet

10、 ANSIA2.6.6. Construction, Shape, and Dimensions6.1 The construction, shape, and dimensions for dogs andhinges shall be as shown in Figs. 1-9.6.2 Door dogs shall be supplied with hold-open clips.1This specification is under the jurisdiction of ASTM Committee F25 on Shipsand Marine Technology and is

11、the direct responsibility of Subcommittee F25.03 onOutfitting and Deck Machinery.Current edition approved Oct. 1, 2012. Published October 2012. Originallyapproved in 1987. Last previous edition approved in 2007 as F1073 - 87(2007).DOI: 10.1520/F1073-87R12.2For referenced ASTM standards, visit the AS

12、TM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3Available from Standardization Documents Order Desk, DODSSP, Bldg. 4,Section D, 700 Robbins Ave., Philad

13、elphia, PA 19111-5098, http:/www.dodssp.daps.mil.4Available from American National Standards Institute (ANSI), 25 W. 43rd St.,4th Floor, New York, NY 10036, http:/www.ansi.org.5Available from American Iron and Steel Institute (AISI), 1140 ConnecticutAve., NW, Suite 705, Washington, DC 20036, http:/w

14、ww.steel.org.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States17. Workmanship, Finish, and Appearance7.1 All materials shall have a smooth finish.7.2 Pretreatment and priming of door fittings shall be asfollows:7.2.1 Mild steel fittings

15、 shall be abrasive blasted to “nearwhite” metal and coated with inorganic zinc silicate at 1.5 to3.0 mils.7.2.2 Steel fittings, secured on doors, shall be welded tosteel; whereas aluminum fittings when secured to aluminum orglass-reinforced plastic doors, shall be welded or bolted intoposition.7.2.3

16、 Nonferrous fittings shall be either riveted or bolted toaluminum, steel or glass-reinforced plastic doors, or combina-tion thereof.7.2.4 Where different metals are to be used, insulation shallbe used between them, in way of contact, to prevent galvanicaction.8. Product Marking8.1 Each fitting shall

17、 be marked with its purchase ordernumber and shall indicate the type of fitting, left hand or righthand. The marking shall be applied on a waterproof tag andattached to the fitting.9. Keywords9.1 airtight; door fittings; doors; gastight; marine; non-tight;ship; tightness integrity; watertight; weath

18、ertightTABLE 1 Classification of Dogs and HingesType DescriptionDog:A Fitted to doorB Fitted to door frameHinge:A With clenched pinB With clenched pin secured with cotter pinTABLE 2 Material for Door DogsComponentMild Steel Aluminum Glass-Reinforced PlasticNumber Item1 Handle interior Specification

19、A668/A668M Specification A668/A668M Specification A668/A668M2 Handle exterior Specification A668/A668M Specification A668/A668M Specification A668/A668M3 Jam nut Specification A563 Specification A563 Specification A2764 Spring washer steel commercial AISI (316) AISI (316)5 Washer steel commercial st

20、eel commercial steel commercial6 Dog sleeve Specification A36/A36M Specification B210 (AL-5086) Specification B210 (AL 5086)7 Bushing oil impregnated bronze oil impregnated bronze oil impregnated bronze8 Packing MIL-P-17578A MIL-P-17578A MIL-P-17578A9 Packing gland MIL-P-17578A MIL-P-17578A MIL-P-17

21、578A10 Grease fitting Specification B140/B140M Specification B140/B140M Specification B140/B140M11 Wedge QQ-C-390 Specification B210 QQ-C-390TABLE 3 Material for Door HingesComponentMild Steel Aluminum Glass-Reinforced PlasticNumber Item1 Piece to frame Specification A36/A36M Specification A240/A240

22、M Specification A240/A240M2 Piece to door Specification A36/A36M Specification A240/A240M Specification A240/A240M3 Clenched pin corrosion-resistant steel (316) corrosion-resistant steel (316) corrosion-resistant steel (316)4 Washer corrosion-resistant steel (commercial) corrosion-resistant steel (c

23、ommercial) corrosion-resistant steel (commercial)5 Cotter pin corrosion-resistant steel (commercial) corrosion-resistant steel (commercial) corrosion-resistant steel (commercial)TABLE 4 Material for Miscellaneous Fittings Door MaterialComponentMild Steel Aluminum Glass-Reinforced PlasticNumber Item1

24、 Port light Specification A240/A240M Specification A240/A240M Specification A240/A240M2 Label plate Specification A240/A240M Specification A240/A240M Specification A240/A240M3 Hasp and eye Specification A276 Specification A276 Specification A2764 Hold back hook Specification A276 Specification A276

25、Specification A2765 Grab handle Specification A276 Specification A276 Specification A276F1073 87 (2012)21 in. = 25.4 mm2.2 lb = 1 kgFIG. 1 Watertight, Airtight, and Weathertight Door Dog Assembly (Estimated Weight 8 lb)1 in. = 25.4 mm2.2 lb = 1 kgFIG. 2 Dog DetailsF1073 87 (2012)31 in. = 25.4 mm2.2

26、lb = 1 kgFIG. 3 Dog Assembly for Non-Tight Doors (Estimated Weight 8 lb)1 in. = 25.4 mm2.2 lb = 1 kgFIG. 4 Hinge Assembly for Non-Tight DoorsF1073 87 (2012)41 in. = 25.4 mmFIG. 5 Hook Staple Detail1 in. = 25.4 mmFIG. 6 Grabhandle DetailF1073 87 (2012)51 in. = 25.4 mmFIG. 7 Frame Assembly Fixed Light

27、1 in. = 25.4 mmFIG. 8 Hasp and Eye Assembly “A”F1073 87 (2012)6SUPPLEMENTARY REQUIREMENTSThe following supplementary requirement shall apply only when specified by the contract or order.S1. PaintingS1.1 Pretreatment and priming of mild steel door compo-nents shall consist of metal spray coating in a

28、ccordance withDOD-STD-2138, Type II on both sides before assembly.S1.2 Aluminum door components shall be treated with achemical conversion coating MIL-C-81706, followed with asecond coat of epoxy polyamide primer (formula 150 ofMIL-P-24441) alkyd haze gray (TT-E-490) or equal. Coatingto be applied b

29、efore assembly, following surface preparation,in accordance with the manufacturers instructions.S1.3 Special heat resisting gaskets, in accordance withMIL-P-17578A, are to be used.ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item m

30、entionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committ

31、ee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meet

32、ing of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, P

33、O Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).1 in. = 25.4 mmFIG. 9 Hinge Assembly for Aluminum DoorsF1073 87 (2012)7