ASTM F1333-1991(2007) Standard Specification for Construction of Fire and Foam Station Cabinets《消防和泡沫灭火站操纵室结构的标准规范》.pdf

1、Designation: F 1333 91 (Reapproved 2007)An American National StandardStandard Specification forConstruction of Fire and Foam Station Cabinets1This standard is issued under the fixed designation F 1333; the number immediately following the designation indicates the year oforiginal adoption or, in the

2、 case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification provides design and constructioncriteria for double and single fire

3、and foam station cabinets.See Fig. 1 and Fig. 2. Valves, hose, and fittings are notincluded.1.2 Optional back and legs may be provided.1.3 The values stated in inch-pound units are to be regardedas the standard. The values in parentheses are for informationonly.2. Referenced Documents2.1 ASTM Standa

4、rds:2A 36/A 36M Specification for Carbon Structural SteelA 53/A 53M Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and SeamlessA 167 Specification for Stainless and Heat-ResistingChromium-Nickel Steel Plate, Sheet, and StripA 312/A 312M Specification for Seamless, Welded, a

5、ndHeavily Cold Worked Austenitic Stainless Steel PipesA 569/A 569M Specification for Steel, Carbon (0.15 Maxi-mum, Percent), Hot-Rolled Sheet and Strip Commercial3B 209 Specification for Aluminum and Aluminum-AlloySheet and PlateB 221 Specification for Aluminum and Aluminum-AlloyExtruded Bars, Rods,

6、 Wire, Profiles, and TubesF 593 Specification for Stainless Steel Bolts, Hex CapScrews, and StudsF 594 Specification for Stainless Steel NutsF 783 Specification for Staple, Handgrab, Handle, and Stir-rup Rung2.2 American National Standards:4ANSI B18.21.1 Lock WasherANSI B18.22.1 Plain Washer2.3 Othe

7、r Standards:American Bureau of Shipping Rules for Building andClassing of Steel Vessels5American Welding Society Publication, AWSD 1.1 Structural Welding Code63. Classification3.1 Type I, Single Cabinet (see Fig. 1 and Figs. 3-9):3.1.1 Grade 1Right-hand door active leaf.3.1.1.1 Class A, Mild SteelSp

8、ecification A 36/A 36M.3.1.1.2 Class B, Stainless SteelSpecification A 167.3.1.1.3 Class C, AluminumSpecification B 209.3.1.2 Grade 2Left-hand door.1This specification is under the jurisdiction of ASTM Committee F25 on Shipsand Marine Technology and is the direct responsibility of Subcommittee F25.1

9、1 onMachinery and Piping Systems.Current edition approved Dec. 1, 2007. Published January 2008. Originallyapproved in 1991. Last previous edition approved in 2002 as F1333 - 91(2002).2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.

10、org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3Withdrawn4Available from American National Standards Institute (ANSI), 25 W. 43rd St.,4th Floor, New York, NY 10036, http:/www.ansi.org.5Available from American Bureau of Shippi

11、ng (ABS), ABS Plaza, 16855Northchase Dr., Houston, TX 77060, http:/www.eagle.org.6Available from American Welding Society (AWS), 550 NW LeJeune Rd.,Miami, FL 33126, http:/www.aws.org.NOTE 11 in. = 25.4 mm.FIG. 1 Fire and Foam CabinetType I1Copyright ASTM International, 100 Barr Harbor Drive, PO Box

12、C700, West Conshohocken, PA 19428-2959, United States.3.1.2.1 Class A, Mild SteelSpecification A 36/A 36M.3.1.2.2 Class B, Stainless SteelSpecification A 167.3.1.2.3 Class C, AluminumSpecification B 209.3.2 Type II, Double Cabinet (see Fig. 2 and Fig. 8):3.2.1 Grade 1Right-hand doors active leaf.3.2

13、.1.1 Class A, Mild SteelSpecification A 36/A 36M.3.2.1.2 Class B, Stainless SteelSpecification A 167.3.2.1.3 Class C, AluminumSpecification B 209.4. Ordering Information4.1 Fire and foam cabinets ordered in accordance with thisspecification shall include the following:4.1.1 ASTM title, designation,

14、and year of issue,4.1.2 Quantity (number of cabinets),4.1.3 Type, grade, and class, and4.1.4 Optional features.5. Materials and Manufacture5.1 Materials:5.1.1 See Table 1.5.1.2 Class materials.5.1.2.1 All materials for Class A cabinets shall meet therequirements of Specifications A 53 and A 36/A 36M

15、 or Speci-fication A 569/A 569M, except as specified in Table 1.5.1.2.2 All materials for Class B cabinets shall meet therequirements of Specifications A 167 and A 312/A 312M, ex-cept as specified in Table 1.5.1.2.3 All materials for Class C cabinets shall meet therequirements of Specifications B 20

16、9 and B 221 except asspecified in Table 1.5.2 Manufacture:5.2.1 Welding shall be in accordance with the AmericanBureau of Shipping Rules for Building and Classing of Vesselsor American Welding Society Structural Welding Code AWSD1.1.5.2.2 Punchout shall have a 3-in. (approximately 76-mm)diameter hol

17、e with three evenly spaced116-in. (approximately1.5-mm) tabs for both sides of cabinet (see Fig. 3).6. Workmanship, Finish, and Appearance6.1 Fire and foam cabinets shall be free of weld spatter,burrs, and sharp corners, rough edges, and other defects whichmight be hazardous to personnel and equipme

18、nt.6.2 Surface Requirements:6.2.1 Class A CabinetsCoat with 1.0-mil dry film thick-ness, inorganic zinc silicate, including options.6.2.2 Class B CabinetsUncoated. Optional legs coatedwith 1.0-mil dry film thickness, inorganic zinc silicate.6.2.3 Class C CabinetsUncoated.7. Packaging and Package Mar

19、king7.1 Loose fasteners and hardware shall be packaged andsecurely attached inside each cabinet.7.2 ShippingEach cabinet shall bear a weathertight tagshowing the purchase order number, ASTM standard designa-tion, type, and name of manufacturer.FIG. 2 Fire and Foam CabinetType IITABLE 1 Parts ListIte

20、m NumberADescriptionB1 Frame plate, 12 gage2 Hinge pad flatbar, 112 in. by 412 in. by 12 gage3 Hinge undrilled butt, 4 in. long by 2 in. wide, commercialstainless steel4 Brace angle,34 by34 by18 in.5 Door plate, 12 gage6 Staple round bar,38-in. dimensions in accordance withSpecification F 7837 Hook

21、round bar,14 in.8 Latch flat bar,316 by1in.9 Keeper flat bar,316 by1in.10 Rivet button monel or aluminum,14 in.11 Clip wrench/nozzle, plate 12 gage12 Snubber rubber, commercial13 Retainer plate, 12 gage14 Saddle pipe 6 NPS Schedule 40, Specification A 5315 Strap hose securing, quick disconnect, comm

22、ercial16 Clip hook securing, commercial, Specification A 16717 Washer TFE-fluorocarbonOptions18 Back plate,316 in.19 Leg angle, 4 by 3 by38 in., Specification A 36/A 36M20 Brace angle, 4 by 3 by38 in., Specification A 36/A 36M21 Bolt hex head,38 16 UNC2A by 114-in. long,stainless steel Type 316, Spe

23、cification F 59322 Washer flat, stainless steel Type 316 for38-in. diameter bolt,ANSI B18.22.1, Type B23 Nut heavy hex38 16 UNC2B, stainless steel Type316, Specification F 59424 Washer lock, stainless steel Type 316 for38-in. diameterbolt, ANSI B18.21.1, RegularType II Double Cabinet Only25 Back bar

24、 flat bar, 112 in. by 30 in. by 12 gageAItems 18 to 24 (inclusive) are optional.B1 in. = 25.4 mm.F 1333 91 (2007)27.3 The cabinets shall be crated or attached to a pallet in amanner acceptable for shipment by commercial carrier. Thecabinets shall be crated individually.8. Keywords8.1 fire; foam; foa

25、m station cabinet; marine technology;shipsFIG. 3 Section “B-B”FIG. 4 Section “C-C”FIG. 5 Wrench/Nozzle Clip Detail “A”FIG. 6 Latch Assembly, Type II, Grade 1 Cabinet Shown, OthersSimilar, Detail “B”F 1333 91 (2007)3FIG. 7 Hook Assembly Detail “C”FIG. 8 Hose Rack Detail “D”F 1333 91 (2007)4ASTM Inter

26、national takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely

27、their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand shou

28、ld be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Stan

29、dards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).FIG. 9 Front View of Back Leg and Back Option Detail “E”F 1333 91 (2007)5