ASTM F1910-1998(2013) Standard Specification for Long Barbed Tape Obstacles《长的有倒刺带状障碍物的标准规范》.pdf

1、Designation: F1910 98 (Reapproved 2013)Standard Specification forLong Barbed Tape Obstacles1This standard is issued under the fixed designation F1910; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A num

2、ber in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification covers barbed tape materials andconfigurations used for security barriers.2. Referenced Documents2.1 ASTM Standards:2A1

3、76 Specification for Stainless and Heat-Resisting Chro-mium Steel Plate, Sheet, and StripA240/A240M Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for PressureVessels and for General ApplicationsA370 Test Methods and Definitions for Mechanical Testingof Steel

4、ProductsA666 Specification for Annealed or Cold-Worked AusteniticStainless Steel Sheet, Strip, Plate, and Flat BarA764 Specification for Metallic Coated Carbon Steel Wire,Coated at Size and Drawn to Size for Mechanical SpringsF1379 Terminology Relating to Barbed Tape3. Terminology3.1 Refer to Termin

5、ology F1379.4. Classification4.1 Refer to 5.1.8.5. Ordering/Specifying Information5.1 Ordering or specifying barbed tape shall include thefollowing information as per sample specification, or byreferencing item numbers in Tables 1 and 2 (indicate number ofloops, if applicable). Material furnished un

6、der this specificationshall conform to applicable requirements of current editions ofASTM Standards.NOTE 1The following sample specification is provided to assist whenspecifying or ordering barbed tape material.Actual size and style will varyby individual job requirements.Sample Specification OnlyBa

7、rbed tape obstacle shall be 30 in.diameter (62 in.). Each loop shall consist of 24 (61) clusters of fourneedle-sharp barbs on 4 in. centers, each barb measuring a minimum of1.2 in. in length. The barbed tape shall be fabricated from Series 430stainless steel with optional hardness. The barbed tape s

8、hall be perma-nently coldclenched over an austenitic mechanical spring core wire. Thewire shall have a diameter of 0.098 in. with a minimum tensile strength ofapproximately 140 psi. The barbed tape shall have a minimum 230 wrapabout the core wire. Adjacent alternate loops shall be clipped together i

9、nfive (5) locations around the circumference to obtain the concertina effect.Clip spacing of the extended coil shall be 12 6 2 in. Clips shall be capableof withstanding a minimum pull load of 200 lb. Each coil shall contain 51loops and cover 25 6 1 ft.5.1.1 QuantityThe number of units of barbed tape

10、 re-quired. For fixed length units, the length per unit should bespecified.5.1.2 Description Barbed tape shall be described as singlecoil helical, single coil concertina, double coil concertina, ordouble coil helical.5.1.3 DiameterThe purchaser shall specify the packageddiameter. When double coil pr

11、oducts are specified, the innerand outer coil packaged diameters shall be given.5.1.4 Barb Length Refer to Terminology F1379 andTables 1 and 2.5.1.5 Coil LoopsThe number of coil loops shall be speci-fied by the purchaser.5.1.6 Unit Length The purchaser shall specify the in-stalled length and coil sp

12、acing, including the coil spacingtolerance.5.1.7 Number of attachment points, in accordance withTerminology F1379 and Tables 1 and 2.5.1.8 Cross Sections The purchaser shall specify the crosssections in accordance with Terminology F1379.6. Material6.1 Composition Barbed tape shall be manufactured fr

13、omstainless and galvanized steel in accordance with the ASTMstandards listed in Section 2. Manufacturers are not necessarilylimited to those materials listed.6.1.1 Stainless Steel Stainless steel strip shall be eitherferretic or austenitic. Stainless steel should be ordered to theAISA or UNS designa

14、tions to ensure the correct chemistry.1This specification is under the jurisdiction of ASTM Committee F14 on Fencesand is the direct responsibility of Subcommittee F14.40 on Chain Link Fence andWire Accessories.Current edition approved March 1, 2013. Published March 2013. Originallyapproved in 1998.

15、 Last previous edition approved in 2008 as F1910 - 98(2008).DOI: 10.1520/F1910-98R13.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary

16、page onthe ASTM website.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States1TABLE 1 Stainless Steel Long Barbed Tape (Reinforced) (See Terminology F1379, Figs. 2 and 3)NOTE 1Maximum barb point radius = 0.005 in.NOTE 2Minimum barb length =

17、 1.2 in.NOTE 3Maximum barb spacing=4in.Item Num-berDescription Barbed Tape Ma-terialCore-Wire Material Barb ClustersPer LoopCoil Loops Coil Loop Spac-ing 2.0 in.Coil Length, ft AttachmentPointsHelical1 18 in. Single CoilHelical430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)13 33 12 in.18 i

18、n.3350002 18 in. Single CoilHelical430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III13 33 12 in.18 in.3350003 18 in. Single CoilHelical430 SS 0.025 in.Thick013312in.18 in.3350004 18 in. Type III SingleCoil Helical300 Series SS0.025 in. Thick013312in.18 in.3350005 24 in. Single CoilHelical430 SS 0

19、.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)19 1 33 12 in.18 in.3350006 24 in. Single CoilHelical430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III19 1 33 12 in.18 in.3350007 24 in. Single CoilHelical430 SS 0.025 in.Thick0 19 1 33 12 in.18 in.335000Concertina8 18 in. Single Coil Con-certina43

20、0 SS 0.025 in.Thick0.098 GalvanizedSteel Class III13 315116 in.12 in.202503039 18 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)13 315116 in.12 in.2025030310 24 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III191 315116 in.12 in.20

21、25030311 24 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)191 315116 in.12 in.2025030312 30 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III241 315116 in.12 in.2025030313 30 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS

22、300 Series140 KSI (965 MPa)241 315116 in.12 in.2025030314 30 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III241 518110112 in.12 in.12 in.25405005050515 30 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)241 518110112 in.12 in.12 in.

23、25405005050516 40 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III311 518112 in.12 in.254007070717 40 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)311 518112 in.12 in.2540050518 40 in. Single Coil Con-certina430 SS 0.025 in.Thick0

24、.098 SS 300 Series140 KSI (965 MPa)311 518112 in.12 in.2540070719 60 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III451 518112 in.12 in.2540090920 60 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)451 518112 in.12 in.2540090921 24/

25、30 in. Double CoilConcertina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III43 2 31 16/16 in. 20 3F1910 98 (2013)26.1.1.1 Ferritic stainless steels shall be produced in accor-dance with Specification A176 or Specification A240/A240M.6.1.1.2 Austenitic stainless steels shall be purchased inaccord

26、ance with Specification A666.7. Dimensions and Permissible Variations7.1 Permissible variations within coil diameters shall be asspecified in Tables 1 and 2 for standard trade sizes.8. Workmanship, Finish, and Appearance8.1 Workmanship Coil loops shall not be kinked, unless itis part of the design.8

27、.1.1 Each coil shall be one continuous length properlycoiled and firmly tied for shipping. Welds made in the stripprior to forming are permitted. A maximum of three splices percoil are permitted either by overlapping and welding orpermanently clamping together with a suitable device designedfor the

28、purpose.8.2 Surfaces shall be smooth and free of rust with no seriousdefects, such as pits, die marks, and other defects to impair theintegrity of the product.9. Certification9.1 When specified in the purchase order or contract, amanufacturers certification of compliance shall be furnished tothe pur

29、chaser showing the quantity, size and type of barbedtape. The certification of compliance shall state that therepresentative barbed tape is in accordance with the specifica-tion.10. Keywords10.1 barbed tapeASTM International takes no position respecting the validity of any patent rights asserted in

30、connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the res

31、ponsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive caref

32、ul consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International

33、, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the AS

34、TM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).TABLE 1 ContinuedItem Num-berDescription Barbed Tape Ma-terialCore-Wire Material Barb ClustersPer LoopCoil Loops Coil Loop Spac-ing 2.0 in.Coil Length, ft Attachm

35、entPoints22 24/30 in. Double CoilConcertina430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)43 2 31 16/16 in. 20 3TABLE 2 Non-Reinforced (See Terminology F1379,Fig.1)Item Num-berDescription Barbed Tape Ma-terialCore-Wire Ma-terialBarb Clustersper LoopCoil Loops Coil Loop Spac-ing2in.Coil Len

36、gth, ft AttachmentPointsNumber of 7 7SS CablesDouble Helical23 24/30 GPBTOType II300 Series SS0.025 in. Thicknone 19/24 1 33/33 24/24 66 0 4-3/64Concertina24 24 in. SingleCoilConcertina300 Series SS0.025 in. Thicknone 19 1 101 12 in. 50 3 1-3/64 5/6425 30 in. SingleCoilConcertina300 Series SS0.025 in. Thicknone 24 1 101 12 in. 50 5 1-3/64 5/6426 40 in. SingleCoilConcertina300 Series SS0.025 in. Thicknone 31 1 101 12 in. 50 7 1-3/64 5/6427 60 in. SingleCoilConcertina300 Series SS0.025 in. Thicknone 45 1 101 12 in. 50 13 1-3/64 5/64F1910 98 (2013)3