1、Designation: F 969 07Standard Practice forConstruction of Chain-Link Tennis Court Fence1This standard is issued under the fixed designation F 969; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number
2、in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This practice covers fencing around tennis courts, builtfrom various types of chain-link fabric and framework mate-rials, and installation pr
3、actices for same.1.2 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to us
4、e.2. Referenced Documents2.1 ASTM Standards:2A 392 Specification for Zinc-Coated Steel Chain-LinkFence FabricA 491 Specification for Aluminum-Coated Steel Chain-Link Fence FabricA 824 Specification for Metallic-Coated Steel MarcelledTension Wire for Use With Chain Link FenceF 552 Terminology Relatin
5、g to Chain Link FencingF 567 Practice for Installation of Chain-Link FenceF 626 Specification for Fence FittingsF 668 Specification for Polyvinyl Chloride (PVC) andOther Organic Polymer-Coated Steel Chain-Link FenceFabricF 900 Specification for Industrial and Commercial SwingGatesF 934 Specification
6、 for Colors for Polymer-Coated ChainLink Fence MaterialsF 1043 Specification for Strength and Protective Coatingson Steel Industrial Chain Link Fence FrameworkF 1083 Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence StructuresF 1345 Specification for Zinc-5 % Alumi
7、num-MischmetalAlloy-Coated Steel Chain-Link Fence FabricF 1664 Specification for Poly(Vinyl Chloride) (PVC) andOther Conforming Organic Polymer-Coated Steel TensionWire Used with Chain-Link Fence2.2 Other Standards:WLG 2445 Guide for the Selection of Line Posts and theirSpacing33. Terminology3.1 Def
8、initionsSee Definitions F 552 for definitions ofterms used in this practice.4. Summary of Practice4.1 This practice is intended primarily to guide thoseresponsible for or concerned with the design and installation ofchain-link fencing around tennis courts.4.2 This practice does not intend to preclud
9、e any practicethat has proven equal to or given better performance undervarying conditions such as location, weather, intended use, etc.5. Significance and Use5.1 The intended use of this practice is for 10- or 12-ft (3050or 3660 mm) high chain-link fencing as complete enclosuresaround single or mul
10、tiple tennis courts, or as backstops ateither end of tennis courts.5.2 This practice is not intended for applications wherefencing higher than 12 ft (3660 mm) is desired for a specialapplication.5.3 Caution Regarding Windscreens If wind screens areto be installed at the time of fence erection or at
11、a later time, itis advisable to use stronger framework and parts and closerspacing of posts or back bracing depending upon the type ofscreening material to be used, area of fence to be covered, andlocal wind conditions. The Chain Link Fence ManufacturersInstitutes (CLFMI), Guide WLG 2445, provides t
12、he designerwith the process to select the post size and post spacing.6. Classification6.1 The four types of chain-link fencing described in thispractice are classified as follows:6.1.1 Type IBuilt with aluminum-coated steel chain-linkfence fabric as specified in Specification A 491.6.1.2 Type IIBuil
13、t with zinc-coated steel chain-link fencefabric as specified in Specification A 392, Class 1 coating only.1This practice is under the jurisdiction of ASTM Committee F14 on Fences andis the direct responsibility of Subcommittee F14.10 on Specific Applications.Current edition approved Feb. 1, 2007. Pu
14、blished February 2007. Originallyapproved in 1986. Last previous edition approved in 2001 as F 969 - 01.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standard
15、s Document Summary page onthe ASTM website.3Available from Chain Link Fence Manufacturers Institute, 10015 Old ColumbiaRoad, Suite B-215, Columbia, MD 21046, http:/www.chainlinkinfo.org.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States
16、.6.1.3 Type IIIBuilt with zinc-5% aluminum-mischmetalalloy-coated steel chain-link fence fabric as specified in Speci-fication F 1345, in a choice of Class 1 or Class 2 coating, asselected.6.1.4 Type IVBuilt with polymer-coated steel chain-linkfence fabric as specified in Specification F 668, in a c
17、hoice ofClass 1, Class 2a, or Class 2b coating, as selected.7. Ordering Information7.1 Purchase orders, construction specifications, or detaileddrawings should include the following information:7.1.1 Quantity or total measurements in lineal feet of fenceand gates.7.1.2 Type of fence (Type I, II, III
18、 or IV) (see 6.1).7.1.3 Class of fence if Type III (Class 1 or 2) (see 6.1.3).7.1.4 Class of fence if Type IV (Class 1, 2a, or 2b) (see6.1.4) and color (see 8.1.2)7.1.5 If framework, fittings and gates are to be color coated,select color from Specification F 934.7.1.6 Height of fence (10 or 12 ft 30
19、50 or 3660 mm).7.1.7 Number of horizontal rails and location.7.1.8 Bottom tension wire, if specified.7.1.9 Depth and diameter of concrete post footings, if otherthan as indicated in Practice F 567.7.1.10 Spacing of line posts, if other than as indicated inPractice F 567.7.1.11 Any details peculiar t
20、o the project, such as specialfinishing of tops of concrete post footings, setting of posts inconcrete curbs, etc. (see 9.2.2 and 9.2.3).NOTE 1A typical ordering description is as follows: 360 lineal ft(109.7 m) chain-link tennis court fence to make a full enclosure 60 by 120ft (18.3 by 36.6 m) with
21、 3 ft (914 mm) gate at one corner, Type I, 12 ft(3660 mm) high, 3 horizontal rails (top, middle, and bottom), furnishedand erected as shown on the enclosed drawing, and in accordance withASTM F 969.7.2 A detailed drawing or drawings showing the completelayout of the fence line, together with typical
22、 elevations, detailsof pavement around post footings, etc., should be a part of thepurchase order or construction contract.8. Materials8.1 Chain-Link Fabric:8.1.1 If Type III is selected, indicate whether Class 1 or 2 isdesired.8.1.2 If Type IV is selected, indicate whether Class 1, 2a, or2b is desi
23、red, and select color of fabric coating in accordancewith Specification F 934.8.1.3 Size of wire shall be 0.120 in. (3.05 mm) 11 gage. IfType IV is selected, this shall be the size of the metallic-coatedcore wire.8.1.4 Size of fabric mesh shall be 134 in. (44 mm).8.1.5 Height of fabric shall be 10 o
24、r 12 ft (3050 or 3660mm), as selected.8.1.6 Fabric selvage shall be knuckled top and bottom.8.2 Posts:8.2.1 Posts shall be as selected from Specifications F 1043and F 1083. If polymer-coated, specify type of coating andcolor.8.2.2 The posts shall not be splice-welded.8.3 Horizontal Rails:8.3.1 Horiz
25、ontal rails shall be as selected from Specifica-tions F 1043 and F 1083. If polymer-coated, specify type ofcoating and color.8.3.2 All fences shall have a top rail. Fences 12 ft (3660mm) in height shall have a continuous middle rail. Additionalrails at mid-points or at the bottom of the fence may be
26、specified.8.4 Bottom Tension Wire:8.4.1 Bottom tension wire shall be used except wherecontinuous bottom rail is specified.8.4.2 Bottom tension wire shall be in accordance withSpecification A 824 for metallic coated chain link fabric andSpecification F 1664 for polymer-coated chain link fabric.8.5 Fi
27、ttings:8.5.1 All fittings shall conform to Specification F 626.IfType IV fabric is selected and polymer-coated posts and railsare also selected, all fittings shall be polymer coated asspecified in Specification F 626, Section 11.8.6 Gates:8.6.1 All gates shall be fabricated in accordance withSpecifi
28、cation F 900.8.6.2 Minimum width of gate opening shall be 3 ft (914mm).8.6.3 All single walk gates shall be 7 ft (2133 mm) highwith a transom panel above the gate extending to full height ofthe fence.8.6.4 Gates shall have hinges to provide a full 180 swingfrom the closed to the open position.8.6.5
29、Gate latch shall have provision for secure locking witha padlock.8.6.6 Gate latch shall have a built-in provision to permit thegate to open outward only.9. Installation9.1 Lay out the fence lines as shown in Fig. 1, Fig. 2,orFig.3.9.2 Installation shall be in accordance with Practice F 567with the f
30、ollowing additional provisions or exceptions:9.2.1 Unless otherwise specified, the chain-link fabric shallbe placed on the playing side of the fence enclosure orbackstops.9.2.2 If fence is installed in concrete curbs around theperimeter of the tennis court(s), provide sleeves in the curbs forthis pu
31、rpose, then set the posts as indicated in Practice F 567.9.2.3 Since in most cases it is impractical to pave the courtsafter setting the posts, it becomes necessary to cut through thefinished pavement and excavate the post holes. The contractspecifications shall indicate whether the concrete footing
32、saround the posts should be brought up to finished grade andtrowelled to a crown, or whether they should be left 6 in. (152mm) below finished grade to allow for cover with black top asdescribed in Practice F 567. If the latter method is selected, thecontract specifications shall stipulate who is res
33、ponsible forinstalling the black top cover over the footings.9.2.4 Install chain-link fabrics with bottom 1 in. (25 mm)maximum above finished pavement.9.2.5 Where bottom tension wire is used, it shall be attachedto the bottom diamond of the chain-link fabric.F96907210. Keywords10.1 tennis court fenc
34、e; chain link; tension wire; bottomrail; 134 in. (44 mm) chain link meshNOTESee Table 1 for SI equivalents.FIG. 1 Typical Fence Layout for Complete Enclosure of OneStandard 36 by 78 ft (11 m by 23.8 m) Doubles CourtF969073NOTESee Table 1 for SI equivalents.FIG. 2 Typical Fence Layout for Backstops a
35、t Either End of One Standard 36 by 78 ft (11 m by 23.8 m) Doubles CourtF969074ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the valid
36、ity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comme
37、nts are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have n
38、ot received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple co
39、pies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).NOTESee Table 1 for SI equivalents.FIG. 3 Typical Fence Layout for Complete Enclosure of Two or More St
40、andard 36 by 78 ft (11 m by 23.8 m) Doubles CourtsTABLE 1 SI Reference Chart12 ft 0 in. = 3.7 m (3 660 mm)21 ft 0 in. = 6.4 m (6 400 mm)48 ft 0 in. = 14.6 m (14 630 mm)60 ft 0 in. = 18.3 m (18 288 mm)108 in. 0 in. = 32.9 m (32 918 mm)120 ft 0 in. = 36.6 m (36 576 mm)156 ft. 0 in. = 47.5 m (47 540 mm)F969075
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1