ASTM F2179-2002(2007) Standard Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers《蜡烛容器用退火的钠钙玻璃容器的标准规范》.pdf

1、Designation: F 2179 02 (Reapproved 2007)Standard Specification forAnnealed Soda-Lime-Silicate Glass Containers That AreProduced for Use as Candle Containers1This standard is issued under the fixed designation F 2179; the number immediately following the designation indicates the year oforiginal adop

2、tion or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification covers the minimum requirements forannealed soda-lim

3、e-silicate glass containers when the producerknows the containers are to be used as candle containers.1.2 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and he

4、alth practices and determine the applica-bility of regulatory requirements prior to use.2. Referenced Documents2.1 Reference to these documents shall be the latest revi-sion, unless otherwise specified by the authority applying thisspecification.2.2 ASTM Standards:2C 148 Test Methods for Polariscopi

5、c Examination of GlassContainersC 149 Test Method for Thermal Shock Resistance of GlassContainersC 162 Terminology of Glass and Glass ProductsC 224 Practice for Sampling Glass ContainersF 1972 Guide for Terminology Relating to Candles andAssociated Accessory Items3. Terminology3.1 For definitions of

6、 glass and glass products terms used inthis specification, refer to Terminology C 162.3.2 For definitions of candle related terms used in thisspecification, refer to Guide F 1972.4. Performance Requirements4.1 Annealing:4.1.1 Transparent GlassContainers examined under po-larized light in accordance

7、with Test Methods C 148 shall, afterannealing, show no greater than real temper number 4. Thisperformance requirement will also apply to containers that arefurther processed (such as ceramic enamel decorations), fol-lowing the original manufacture, by reheating the containerabove the strain point an

8、d cooling to room temperature. TheScratch Test (Section 5) can be used as an alternative to TestMethods C 148. Containers tested in accordance with theScratch Test shall show no fractures.4.1.2 Non-transparent GlassIf glass condition (color,decoration, etc.) prohibits sufficient light transmission f

9、or useof Test Methods C 148, annealing shall be qualified through theuse of the Scratch Test (Section 5). Containers tested inaccordance with the Scratch Test shall show no fractures. Thisperformance requirement will also apply to containers that arefurther processed (such as ceramic enamel decorati

10、ons), fol-lowing the original manufacture, by re-heating the containerabove the strain point and cooling to room temperature.4.2 Thermal Shock:4.2.1 Containers shall not crack or break when tested at athermal shock temperature differential (DT) of 90 Fahrenheitdegrees (50 Celsius degrees) during con

11、tinuous production inaccordance with Test Method C 149.4.2.2 Containers shall be tested at a thermal shock tempera-ture differential (DT) of 90 Fahrenheit degrees (50 Celsiusdegrees) during lot sampling in accordance with PracticeC 224.5. Test Methods5.1 ScopeThis Scratch Test Method is designed to

12、ensurethat residual stress is reduced to a commercially acceptablelevel in annealed soda-lime-silicate glass containers that areintended for use as candle containers. It provides an alternativemethod to Test Methods C 148. Two methods of performingthe Scratch Test are covered:1This specification is

13、under the jurisdiction of ASTM Committee F15 onConsumer Products and is the direct responsibility of Subcommittee F15.45 onCandle Products.Current edition approved June 1, 2007. Published September 2007. Originallyapproved in 2002. Last previous edition approved in 2002 as F 2179 02.2For referenced

14、ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Consh

15、ohocken, PA 19428-2959, United States.5.1.1 Test Method AScratch Test using a tungsten carbidescribe, 5.4.2.1, and5.1.2 Test Method BScratch Test using fifty-grit emerypaper/cloth, 5.4.2.2.NOTE 1Independent test results showed no significant statisticaldifference between using tungsten carbide scrib

16、e and fifty-grit emerypaper/cloth.5.2 Significance and UseThis test method can be used inthe quality control of soda-lime-silicate glass candle contain-ers, where the degree of annealing must be verified to ensurequality products. This procedure can be used where glasscannot be read by polariscope (

17、color, decoration, etc.) or as analternative method for transparent glass containers.5.3 SamplingMethods of sampling for a group of contain-ers of a given type are given in Practice C 224 for annealing.5.4 Test Procedure:5.4.1 Allow the ware to cool evenly through the entirethickness of the containe

18、r to room temperature before usingeither Method A or B.NOTE 2Failure to cool the container completely may result in a falseresult.5.4.2 Scratch Procedure:5.4.2.1 Using Method AWith a tungsten carbide scribe,scratch once around the inside knuckle of the article. Thenscratch an “X” across the entire i

19、nside bottom surface of thearticle. All scratches are to be made using sufficient pressure topenetrate the surface of the glass.5.4.2.2 Using Method BWith fifty-grit emery paper/cloth,abrade the inside surface of each article using sufficient force topenetrate the surface of the glass. Ensure that a

20、ll sharp corners,dimples, indentations are abraded. A new piece of emerypaper/cloth is to be used for every piece tested.5.4.3 After using either method A or B, fill each article withwater at the same room temperature as the glass. Wait fifteenminutes, then empty the water and examine each piece for

21、fractures.5.5 ReportReport the number of fractures, if any for eachtest.5.6 Precision and BiasNo information is presented abouteither the precision or bias of the scratch test method since thetest result (fracture versus no fracture) is nonquantitative.6. Keywords6.1 annealing; attributes; candle co

22、ntainers; glass; nontransparent glass; scratch test; soda-lime-silicate; thermalshock; transparent glassASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that

23、determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapprove

24、d or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel

25、 that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).F 2179 02 (2007)2