ASTM F2415-2006(2008) Standard Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft.pdf

1、Designation: F 2415 06 (Reapproved 2008)Standard Practice forContinued Airworthiness System for Light Sport GyroplaneAircraft1This standard is issued under the fixed designation F 2415; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revisio

2、n, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This practice covers continued operational safety moni-toring of light sport gyroplane aircraft.1.2 Thi

3、s practice applies to light sport gyroplane aircraftseeking civil aviation authority approval in the form of flightcertificates, flight permits, or other like documentation. Thispractice applies to kit and ready-to-fly aircraft supplied by amanufacturer.1.3 The values stated in SI units are to be re

4、garded as thestandard. The values given in parentheses are for informationonly.1.4 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and dete

5、rmine the applica-bility of regulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards:2F 2352 Specification for Design and Performance of LightSport Gyroplane AircraftF 2449 Specification for Manufacturer Quality AssuranceProgram for Light Sport Gyroplane Aircraft3. Terminology3.

6、1 Definitions:3.1.1 light sport gyroplane, npowered rotorcraft designedin accordance with Specification F 2352.3.1.2 manufacturer, nany entity engaged in the produc-tion of a light sport gyroplane aircraft or light sport gyroplaneaircraft kit.4. Significance and Use4.1 The purpose of this practice i

7、s to establish a method bywhich safety of flight issues are discovered, evaluated, andcorrected for the purpose of maintaining operational safety ofa light sport gyroplane aircraft.5. Current Owner List Documentation5.1 A current owner list will be maintained by the manu-facturer that includes all a

8、ircraft in service by serial numberand registration number, together with the name and address ofthe owner.5.2 In cases where the presiding aviation authority recordsof registered owners is sufficient for tracking aircraft and themanufacturer has access to such records, the manufacturer mayelect to

9、utilize such records for complying with this section.6. Responsibilities of the Manufacturer6.1 Manufacturers ResponsibilitiesLSA gyroplanemanufacturers shall develop and implement a system ofreceiving, evaluating, and correcting safety of flight andservice difficulty issues.6.1.1 Manufacturer shall

10、 evaluate all safety of flight andservice difficulty reports and shall initiate corrective action asneeded to correct any safety of flight related issues.6.1.2 Manufacturer shall not use notices of corrective actionto promote or make mandatory non-safety of flight relatedequipment upgrades or additi

11、ons.6.1.3 The manufacturer shall provide with the delivery ofeach LSA gyroplane documented continued airworthinessinstructions in the English language. These instructions shallinclude at least the following:6.1.3.1 A method for the owner/operator to report mainte-nance, service, and safety difficult

12、ies to the manufacturer, inaccordance with Section 8.6.1.3.2 A method for the owner/operator to obtain andverify that they have the latest safety of flight informationdeveloped by the manufacturer, in accordance with Section 9.6.1.3.3 Instructions pertaining to annual and 100-h inspec-tion items, as

13、 needed.1This practice is under the jurisdiction of ASTM Committee F37 on Light SportAircraft and is the direct responsibility of Subcommittee F37.50 on Gyroplane.Current edition approved May 15, 2008. Published July 2008. Originallyapproved in 2004. Last previous edition approved in 2006 as F 2415

14、06.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.1Copyright ASTM International, 100 Barr Harbor Drive, PO B

15、ox C700, West Conshohocken, PA 19428-2959, United States.7. Responsibilities of the Owner/Operator7.1 Current owners shall make all service publications, asdefined in this practice, available to all operators of the aircraftto which they apply.7.2 An owner/operator choosing not to comply with anFAA

16、or the aircraft manufacturers mandatory service require-ment may place the aircraft into the experimental light sportaircraft certification status.7.3 An owner/operator may propose an alternate means ofaddressing a mandatory service requirement by submittingdocumentation, technical information, or b

17、oth, to the aircraftmanufacturer to support compliance with SpecificationsF 2352 and F 2449.8. Monitoring, Investigation, and Remedial Action8.1 Manufacturers must provide definitions for those servicedifficulties to be reported to the manufacturer by the owners/operators.8.2 Manufacturers must prov

18、ide a means for owners/operators to report such service difficulties.8.3 Manufacturers shall maintain contact with authorizedresellers and owners who report incidents or other situationsthat might relate to safety, operations, or maintenance ofaircraft produced and placed in service.8.4 Manufacturer

19、s will promptly investigate all reportedfailures, malfunctions, or defects and develop the appropriatecorrective action.8.5 Manufacturers must document all service difficulty re-ports and maintain a record of the analysis used in determiningthe level of response.8.6 Manufacturers shall issue a notic

20、e of corrective action inrelation to the magnitude of the service problem as defined inSections 9-11.8.7 Manufacturers who have utilized components or prod-ucts that carry an FAA Type Certificate (TC) or productsmanufactured under the authority of a Technical Service Order(TSO) must address all rele

21、vant service bulletins (issued by themanufacturer of said component or product) and FAAAirwor-thiness Directives (AD) through issuance of a service directivethat stipulates an approved method of compliance.8.8 The manufacturer shall consider alternate means ofaddressing a mandatory service requireme

22、nt proposed by theowner/operator in accordance with 7.3, and shall issue denialor acceptance of the proposal in writing to the owner/operatormaking the proposal.9. Notice of Corrective ActionSafety Directive9.1 A safety directive shall be distributed by the manufac-turer to all owners when a conditi

23、on is found to exist that mayalso exist in other aircraft from that manufacturer, and whichmay cause a deviation from original design or unsafe conditionfor flight, rendering the aircraft unairworthy. This safetydirective shall contain the manufacturers prescribed correctiveaction. This corrective a

24、ction detailed in the safety directive ismandatory. This corrective action may be in the form of amaintenance procedure, inspection procedure, or other proce-dures deemed appropriate by the manufacturer. This must beperformed and documented in the individual aircraft logs inorder for the aircraft to

25、 comply with ASTM standards. When asafety directive is issued, immediately provide a copy to thepresiding aviation authority.10. Notice of Corrective ActionService Bulletin10.1 Service bulletins will be issued by the manufacturer toall owners. A service bulletin does not require immediateaction but

26、is recommended for future action. A service bulletinmay be issued as a result of the manufacturer developing adesign change or a service procedure change that will improvethe operation or maintenance of the aircraft. Service bulletinsare not mandatory to maintain the aircrafts compliance withASTM st

27、andards.11. Notice of Corrective ActionNotification11.1 The manufacturer shall issue notification letters on anysubject that is considered helpful to the owners/operators. Suchletters are intended to maintain a good rapport with theowners/operators, encourage feedback on service and otherproblems, o

28、r to circulate items of interest that an owner/operator may feel would be of value to other owners/operators.A notification letter does not include any mandatory owner/operator actions.12. Document Maintenance, Preservation, and Access12.1 Copies MaintainedIn order to help ensure that thefleet of ai

29、rcraft remains airworthy, the manufacturer shallmaintain documentation on file showing compliance withSpecifications F 2352, F 2449, and Practice F 2415. Upon theevent that the original manufacturer ceases to exist as a viablebusiness entity, the original manufacturer shall arrange for thecontinued

30、maintenance of this documentation on file, includingthe current owners list. This documentation showing compli-ance with the standards and any safety directive bulletins shallbe copied and maintained at a physically safe location. Forpurposes of this practice, a physically safe location is onewhich

31、is at least 33 m (100 ft) from the main productionfacility, such that a fire could not destroy both sets of records.12.2 Access AssuranceThis documentation should beavailable in such a manner that it can be properly obtained forcontinued airworthiness support in the event that existingavenues of rec

32、overing the information are destroyed. Thisdocumentation shall be retained such that in the event that afuture entity wishes to continue supporting the airworthiness ofthe make and model involved, they may do so by making useof the original manufacturers documentation. The originalmanufacturer may e

33、ither keep these documents on file so thatthey will be available at any future date, or shall turn them overto a responsible agency such as the Federal Aviation Admin-istration (FAA) or other industry entity for safekeeping. Thelocation and contact for accessing these documents shall bepresented in

34、the Pilot Operating Handbook, and any revision tothis information shall be disseminated through service bulletinsto the aircraft owners. Any acquisition of documentation forpurposes of maintaining airworthiness shall follow the thenapplicable laws or rules concerning intellectual property rights.13.

35、 Keywords13.1 gyroplane; light sport aircraftF 2415 06 (2008)2ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such

36、patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited

37、either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fa

38、ir hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).F 2415 06 (2008)3