ASTM F2493-2014 Standard Specification for P225 60R16 97S Radial Standard Reference Test Tire《P225 60R16 97S径向标准参考试验轮胎的标准规格》.pdf

1、Designation: F2493 14Standard Specification forP225/60R16 97S Radial Standard Reference Test Tire1This standard is issued under the fixed designation F2493; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision.

2、 A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification covers the general requirements forthe P225/60R16 97S radial standard reference test tire. The tirecovered by thi

3、s specification is primarily for use as a referencetire for braking traction, snow traction, and wear performanceevaluations, but may also be used for other evaluations, such aspavement roughness, noise, or other tests that require areference tire.1.1.1 Other standard reference test tires are also u

4、sed forthese purposes and are referenced in Section 2.1.2 This specification provides a rim code diameter of 16standard tire design and construction, standard dimensions, andspecifies the conditions of storage.1.3 The values stated in inch-pound units are to be regardedas standard. The values given

5、in parentheses are mathematicalconversions to SI units that are provided for information onlyand are not considered standard.1.4 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish app

6、ro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards:2D412 Test Methods for Vulcanized Rubber and Thermoplas-tic ElastomersTensionD2240 Test Method for Rubber PropertyDurometer Hard-nessD3182 Practice

7、for RubberMaterials, Equipment, and Pro-cedures for Mixing Standard Compounds and PreparingStandard Vulcanized SheetsE867 Terminology Relating to Vehicle-Pavement SystemsE1136 Specification for P195/75R14 Radial Standard Refer-ence Test TireF538 Terminology Relating to the Characteristics and Per-fo

8、rmance of TiresF2870 Specification for 315/70R22.5 154/150L RadialTruck Standard Reference Test TireF2871 Specification for 245/70R19.5 136/134M RadialTruck Standard Reference Test TireF2872 Specification for 225/75R16C 116/114S M+S RadialLight Truck Standard Reference Test Tire3. Terminology3.1 Def

9、initions:3.1.1 For definitions of terms used in this specification, referto Terminology F538.3.1.2 all-season tread, ntread design providing dry, wet,and snow traction performance for an optimized balance foryear-round performance and which may meet the RubberManufacturers Association (RMA) definiti

10、on for an M F09; fixed slip; SRTT; standardreference test tire; tire pavement friction; traction; treadwearASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised th

11、at determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reappr

12、oved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you f

13、eel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual re

14、prints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the Copyright Clearance Center, 222Rosewood Drive, Danvers, MA 01923, Tel: (978) 646-2600; http:/ 144