1、Designation: F3021 14Standard Specification forUniversal Design of Fitness Equipment for Inclusive Use byPersons with Functional Limitations and Impairments1This standard is issued under the fixed designation F3021; the number immediately following the designation indicates the year oforiginal adopt
2、ion or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.INTRODUCTIONThe goal of this specification is to promote proper design and manufactur
3、ing practices for fitnessequipment intended for use by persons with functional limitations and impairments. Through thesespecifications, this standard aims to assist designers and manufacturers in reducing the possibility ofinjury when these products are used in accordance with the operational instr
4、uctions.The equipment user must recognize, however, that the standard alone will not necessarily preventinjuries. Like other physical activities, exercise involving fitness equipment involves the risk of injury,particularly if the equipment is used improperly or not properly maintained. In addition,
5、 users withphysical limitations should seek medical advice and instruction from the fitness facility prior to usingthis equipment. Certain physical conditions or limitations may preclude some persons from using theequipment properly and without increasing the risk of serious injury.1. Scope1.1 This
6、specification2established additional requirementsnot set forth in the referenced ASTM standards for the designof commercial fitness equipment to increase access and userindependence by people with functional limitations or impair-ments.1.2 The intent of this specification is to assure that thefitnes
7、s product being designed for inclusive use by individualswith and without functional limitations or impairments remainsfunctional and safe when the equipment is operated accordingto the manufacturers operational instructions.1.3 It is the intent of this specification to specify productsfor indoor us
8、e in a commercial environment by individuals age13 and above.1.4 Products designed to meet this specification must not beautomatically classified as fit for medical or rehabilitationfitness purposes. Products intended for medical use shouldcomply with any applicable international or national standar
9、ds.1.5 Where users are exercising from a wheelchair, it is theintent of this specification to specify products for use byindividuals using manual or powered wheelchairs (includingscooters).1.6 This standard does not purport to address the needs ofevery possible user and recognizes that access will n
10、ot bepossible for all individuals or all types of assistive technolo-gies.1.7 Designers shall use this specification in conjunctionwith other ASTM fitness equipment standards and its accom-panying test method.1.8 The values stated in SI units are to be regarded asstandard. The values given in parent
11、heses are for informationonly.1.9 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitation
12、s prior to use.NOTE 1Additional specifications applicable to specific pieces ofequipment, such as treadmills, bicycles, ellipticals, and strength equip-ment are currently under development.1This specification is under the jurisdiction of ASTM Committee F08 on SportsEquipment, Playing Surfaces, and F
13、acilities and is the direct responsibility ofSubcommittee F08.30 on Fitness Products.Current edition approved Sept. 1, 2014. Published October 2014. Originallyapproved in 2013. Last previous edition approved in 2013 as F3021 13. DOI:10.1520/F3021-14.2This work was funded, in part, by the Rehabilitat
14、ion Engineering ResearchCenter on RecTech through the National Institute on Disability and RehabilitationResearch under the US Department of Education grant #H133E070029 andH133120005.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States12.
15、 Referenced Documents2.1 ASTM Standards:3F1749 Specification for Fitness Equipment and Fitness Fa-cility Safety Signage and LabelsF2115 Specification for Motorized TreadmillsF2276 Specification for Fitness EquipmentF3022 Test Method for Evaluating the Universal Design ofFitness Equipment for Inclusi
16、ve Use by Persons withFunctional Limitations and Impairments2.2 ADAAG:4Americans with Disabilities Act Accessibility Guidelines(ADAAG)2.3 ISO Standards:5ISO 845 Cellular plastics and rubbers - Determination ofapparent densityISO 2439 Flexible cellular polymeric materials - Determi-nation of hardness
17、 (indentation technique)3. Terminology3.1 Definitions of Terms Specific to This Standard:3.1.1 access, vgetting at or on fitness equipment or atfitness equipment controls or adjustments.3.1.2 assistive technologies, nadaptive or rehabilitativedevices, or both, for people with disabilities that promo
18、tegreater independence by enabling people to perform tasks thatthey were formerly unable to accomplish, or had great diffi-culty accomplishing.3.1.2.1 DiscussionAssistive technologies include, but arenot limited to, wheelchairs, walkers, canes, crutches,prosthetics, alternative communication devices
19、, cell phones,etc.3.1.3 audible feedback or instruction, naudio voice/speech output.3.1.4 color contrast, nthe difference in luminance be-tween two or more surfaces seen simultaneously or succes-sively.3.1.4.1 DiscussionIn this standard, significant color con-trast is defined as 70 % or more, which
20、is the current bestpractice.3.1.4.2 DiscussionIn this standard, contrast is measuredby measuring the luminance (L) of color, as opposed to colorhue or saturation.3.1.5 control panel/console, nequipment/user interfacedevice for controlling the operation of, or displaying informa-tion about the operat
21、ional state of the equipment.3.1.6 core branding and logo artwork/graphics,nequipment supplier logo, artwork, or graphics, or combina-tions thereof, that promote and market their brand.3.1.6.1 DiscussionCore branding is not to be used withinthe body of instructional text.3.1.7 gripping surface, nthe
22、 area of the hand grips or handgrip bars/rails intended to be grasped by the hands for balanceor stability during access, egress, or exercise, or combinationsthereof.3.1.8 hand grips, fixed, nnon-movable piece designed tobe grasped by the hand(s) for support during access, egress, orexercise, or com
23、binations thereof.3.1.8.1 DiscussionThis includes both applied and integralhand grips as defined in Specification F2276.3.1.9 hand grips, movablemovable piece designed to begrasped by the hand(s) for support and use during exercise.3.1.9.1 DiscussionThis includes both applied and integralhand grips
24、as defined in Specification F2276.3.1.10 iconography, ngraphic or pictorial symbols usedon consoles or other parts of the equipment to displayinformation.3.1.11 impairment, nany deficit in psychological,physiological, or anatomical structure or function that has anadverse effect on a persons ability
25、 to carry out day to dayactivities, including health and leisure activities.3.1.11.1 DiscussionAn impairment is not a disability if itdoes not interfere with task performance.3.1.12 inclusive, adjincluding people with and withoutdisabilities or impairments, or both.3.1.13 incremental weights, naddit
26、ional fractionalweights that can be applied in between the main weight plateselections.3.1.14 instructions for use, nuser facing instructions thatare affixed to the equipment relating to the use of a piece ofequipment, not including core branding or logo artwork,manufacturers labels, model number la
27、bels, or standards orcertification marks, or owners/training manual(s).3.1.14.1 DiscussionFor example: Placard, decal panel, orother means.3.1.15 labels, ninformation directed at the user to supportthe use of a specific element of a piece of equipment, notincluding core branding or logo artwork, man
28、ufacturers labels,model number labels or standards, or certification marks.3.1.16 luminance (L), nvalue or lightness on a scaleranging from black to white of light reflected off a surfacemeasured in candela per meter squared (cd/m2).3.1.17 main controls, nquick start, start, stop, enter, clear,numer
29、ic digits 0 to 9, increase resistance/level, decreaseresistance/level, increase speed, decrease speed, increasegradient/incline, decrease gradient/incline, audio on/off, andany other functions, for example, emergency or safety stops,considered essential for the use of the equipment.3.1.18 movable se
30、at, na seat which can be moved awayfrom the primary exercise position where the entire seatstructure remains attached to the main structure of the equip-ment.3For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of A
31、STMStandards volume information, refer to the standards Document Summary page onthe ASTM website.4Available from the USAccess Board, www.access-board.gov, or contact the USAccess Board Customer Service at taaccess-board.gov.5Available from International Organization for Standardization (ISO), 1, ch.
32、 dela Voie-Creuse, CP 56, CH-1211 Geneva 20, Switzerland, http:/www.iso.org.F3021 1423.1.19 postural supports, nintegral element to the equip-ment which assists in holding the user in position duringexercise.3.1.20 quick start, none push mechanism that starts theequipment in manual mode at the minim
33、al speed or resistancethat is specified in the standard for the specific piece ofequipment.3.1.21 removable seat, na seat that can be moved awayfrom the primary exercise position where the entire seatstructure can be removed or separated from the remainingstructure of the equipment.3.1.22 sans serif
34、, nwithout any short lines stemming fromor at an angle to the upper and lower ends of the strokes of aletter.3.1.22.1 DiscussionFor example: Times New Roman is aserif font where as Arial, Helvetica, and Calibri are sans seriffonts.3.1.23 skids, na mechanism for moving equipment bysliding across the
35、floor without wheels.3.1.24 tactile, adjof, or relating to, or proceeding from,the sense of touch.3.1.25 transfer, vthe action of getting onto (access) or offof (egress) a piece of fitness equipment, particularly from awheelchair or other mobility aid.3.1.26 transfer surface, narea of the static or
36、movingsurface, or both, that is clear of any obstruction that wouldimpede normal foot placements or motion, or both, andtherefore is accessible for normal use.3.1.27 wheelchair, ndevice to provide wheeled mobilitywith seating support system for a person with mobilityimpairment, including manual whee
37、lchairs which are poweredby the user and electrically powered wheelchairs which arepowered by a motor.3.1.27.1 DiscussionA walking aid with wheels is not awheelchair.3.1.27.2 DiscussionA scooter is an electrically poweredwheelchair.4. Color Contrast4.1 Color Contrast Criteria Background:4.1.1 For th
38、e purpose of this standard, significant colorcontrast is defined to be a value greater than or equal to 70 %.4.1.2 The following applies to these sections within thedocument:4.1.2.1 Integral surfaces and separate steps/frame (see5.1.1.7).4.1.2.2 Element of the equipment where the user is requiredto
39、step over/adjacent surface (see 5.1.1.12).4.1.2.3 Seats/primary adjacent surface (see 5.1.2.10).4.1.2.4 Adjustment mechanisms/adjacent surface (see5.1.3.8).4.1.2.5 Markings/adjacent surface (see 5.1.3.12).4.1.2.6 Intended gripping surfaces of all hand grips/adjacentsurface (see 5.1.4.4).4.1.2.7 Test
40、, iconography, and a minimum of the border ofthe main instruction panel/adjacent surface (see 5.1.6.7).4.1.2.8 Inclusive fitness symbol/adjacent surface (see5.1.6.8).4.1.2.9 Text, iconography, and a minimum of the border ofthe main control buttons/adjacent surface (see 5.2.4.3).4.1.2.10 Numeric read
41、outs relating to the main controls/adjacent surface (see 5.2.6.2).4.1.2.11 Audio headphone jack (socket) symbol/adjacentsurface (see 5.2.7.8).4.1.2.12 Information button symbol/adjacent surface (see5.2.7.14).4.1.3 The US Access Boards Americans with DisabilitiesAct Accessibility Guidelines (ADAAG) f
42、or signage specifiesthat signage is “more legible for persons with low vision whencharacters contrast with their background by at least 70 per-cent” (A1.4.1). The calculation of contrast is determined by:Contrast 5 L1 2 L2!L1# 3100 (1)whereL1 = luminance (L) of the lighter areaL2 = luminance (L) of
43、the darker area4.2 Color Definitions:4.2.1 There are three basic properties of color: Hue (thecolor), Saturation (or intensity), and Lightness (or value). SeeFig. 1.4.2.1.1 Hue refers to what is commonly called color, forexample, red, green, blue-green, orange, etc.4.2.1.2 Saturation refers to the r
44、ichness of a hue as com-pared to a gray of the same lightness or value; in some colornotation systems, saturation is also known as chroma.4.2.1.3 Lightness (or Value), of a light source or the light-ness of an opaque object is measured on a scale ranging fromdim to bright for a light source or from
45、black to white for anopaque object (or from black to colorless for a transparentobject). In some systems, lightness is called value.4.2.2 Color contrast in this standard is defined as the light todark (or value) contrast since this is the characteristic that canbe seen by most of the population, inc
46、luding people that arecompletely color blind.4.2.2.1 LuminanceThe measurement of reflected light iscalled luminance. Luminance is “the amount of visible lightleaving a point on a surface in a given direction.due toreflection,” or the perceived or apparent brightness of a surfaceFIG. 1 Hue, Saturatio
47、n, ValueF3021 143(A1.4.2). The standard unit of luminance is candela per squaremeter (cd/m2), also called nits. Luminance is measured using areflective light meter, a technology that measures light withinthe visible spectrum.4.2.2.2 IlluminanceThe measurement of incident light iscalled illuminance.
48、Illuminance is the total luminous fluxincident on a surface, or the “quantity of light.falling on a unitarea of a surface” (A1.4.3). The standard unit of luminance islux (lx). Illuminance is measured using an incident lightmetera technology that measures light within the visiblespectrum.4.3 Spot Lum
49、inance Meter TechnologyThe ADAAG doesnot specify the technology or methodology to measure theluminance values in Eq 1.At the time this standard was written,at least one simple, low-cost technology solution had beenidentified: a spot meter designed for the photography andcinematography industries. An alternate technology, a spectro-photometer was investigated; however, its cost and complexitymade it an unrealistic option. Spot meter technology measurescolor value, not hue, by measuring luminance, measures smallareas, is econom
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1