1、Designation: F3021 16F3021 17Standard Specification forUniversal Design of Fitness Equipment for Inclusive Use byPersons with Functional Limitations and Impairments1This standard is issued under the fixed designation F3021; the number immediately following the designation indicates the year oforigin
2、al adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.INTRODUCTIONThe goal of this specification is to promote proper design and ma
3、nufacturing practices for fitnessequipment intended for use by persons with functional limitations and impairments. Through thesespecifications, this standard aims to assist designers and manufacturers in reducing the possibility ofinjury when these products are used in accordance with the operation
4、al instructions.The equipment user must recognize, however, that the standard alone will not necessarily preventinjuries. Like other physical activities, exercise involving fitness equipment involves the risk of injury,particularly if the equipment is used improperly or not properly maintained. In a
5、ddition, users withphysical limitations should seek medical advice and instruction from the fitness facility prior to usingthis equipment. Certain physical conditions or limitations may preclude some persons from using theequipment properly and without increasing this equipment as intended by the ma
6、nufacturer, and usingthis equipment may increase the risk of serious injury.1. Scope1.1 This specification2 established additional requirements not set forth in the referenced ASTM standards for the design ofcommercial fitness equipment to increase access and user independence by people with functio
7、nal limitations or impairments.1.2 The intent of this specification is to assureensure that the fitness product being designed for inclusive use by individuals withand without functional limitations or impairments remains functional and safe when the equipment is operated according to themanufacture
8、rs operational instructions.1.3 It is the intent of this specification to specify products for indoor use in a commercial environment by individuals age 13and above.1.4 Products designed to meet this specification must not be automatically classified as fit for medical or rehabilitation fitnesspurpo
9、ses. Products intended for medical use should comply with any applicable international or national standards.1.5 Where users are exercising from a wheelchair, it is the intent of this specification to specify products for use by individualsusing manual or powered wheelchairs (including scooters) (A1
10、4.5).1.6 This standard does not purport to address the needs of every possible user and recognizes that access will not be possiblefor all individuals or all types of assistive technologies.1.7 Designers shall use this specification in conjunction with other ASTM fitness equipment standards and its
11、 accompanyingtest method.1.8 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibilityof the user of this s
12、tandard to establish appropriate safety and health practices and determine the applicability of regulatorylimitations prior to use.1 This specification is under the jurisdiction of ASTM Committee F08 on Sports Equipment, Playing Surfaces, and Facilities and is the direct responsibility ofSubcommitte
13、e F08.30 on Fitness Products.Current edition approved Oct. 1, 2016April 1, 2017. Published November 2016July 2017. Originally approved in 2013. Last previous edition approved in 20152016 asF3021 15.F3021 16. DOI: 10.1520/F3021-16.10.1520/F3021-17.2 This work was funded, in part, by the Rehabilitatio
14、n Engineering Research Center on RecTech through the National Institute on Disability, Independent Living, andRehabilitation Research grant #90RE5009-01-00.This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made
15、to the previous version. Becauseit may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current versionof the standard as published by ASTM is to be considered the official document.Copyri
16、ght ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States1NOTE 1Additional specifications applicable to specific pieces of equipment, such as treadmills, bicycles, ellipticals, and strength equipment arecurrently under development.1.10 This internati
17、onal standard was developed in accordance with internationally recognized principles on standardizationestablished in the Decision on Principles for the Development of International Standards, Guides and Recommendations issuedby the World Trade Organization Technical Barriers to Trade (TBT) Committe
18、e.2. Referenced Documents2.1 ASTM Standards:3F1749 Specification for Fitness Equipment and Fitness Facility Safety Signage and LabelsF2115 Specification for Motorized TreadmillsF2276 Specification for Fitness EquipmentF3022 Test Method for Evaluating the Universal Design of Fitness Equipment for Inc
19、lusive Use by Persons with FunctionalLimitations and Impairments2.2 ADAAG:4Americans with Disabilities Act Accessibility Guidelines (ADAAG)2.3 Federal Standard:FED-STD-595B Colors Used in Government Procurement2.4 ISO Standards:5ISO 845 Cellular plastics and rubbers - Determination of apparent densi
20、tyISO 2439 Flexible cellular polymeric materials - Determination of hardness (indentation technique)3. Terminology3.1 Definitions of Terms Specific to This Standard:3.1.1 access, vgetting at or on fitness equipment or at fitness equipment controls or adjustments.3.1.2 assistive technologies, nadapti
21、ve or rehabilitative devices, or both, for people with disabilities that promote greaterindependence by enabling people to perform tasks that they were formerly unable to accomplish, or had great difficultyaccomplishing.3.1.2.1 DiscussionAssistive technologies include, but are not limited to, wheelc
22、hairs, walkers, canes, crutches, prosthetics, alternative communicationdevices, cell phones, etc.3.1.3 audible feedback or instruction, naudio voice/speech output.3.1.4 color value contrast, nthe difference in luminance between two or more surfaces seen simultaneously or successively.3.1.4.1 Discuss
23、ionIn this standard, significant color value contrast is defined as 70 % or more, which is the current best practice.3.1.4.2 DiscussionIn this standard, contrast is measured by measuring the luminance (L) of color, as opposed to color hue or saturation.3.1.5 control panel/console, nequipment/user in
24、terface device for controlling the operation of, or displaying information aboutthe operational state of the equipment.3.1.6 core branding and logo artwork/graphics, nequipment supplier logo, artwork, or graphics, or combinations thereof, thatpromote and market their brand.3.1.6.1 DiscussionCore bra
25、nding is not to be used within the body of instructional text.3 For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at serviceastm.org. For Annual Book of ASTM Standardsvolume information, refer to the standards Document Summary page on the ASTM website
26、4 Available from the US Access Board, www.access-board.gov, or contact the US Access Board Customer Service at taaccess-board.gov.5 Available from International Organization for Standardization (ISO), 1, ch. de la Voie-Creuse, CP 56, CH-1211 Geneva 20, Switzerland, http:/www.iso.org.F3021 1723.1.7
27、free weight style exercise bench, nan adjustable or fixed seat device that is intended to provide stability during exercisewith free weights, generally consisting of a supported, padded area to sit, lean, or recline.3.1.8 gripping surface, nthe area of the hand grips or hand grip bars/rails intended
28、 to be grasped by the hands for balance orstability during access, egress, or exercise, or combinations thereof.3.1.9 hand grips, fixed, nnon-movable piece designed to be grasped by the hand(s) for support during access, egress, orexercise, or combinations thereof.3.1.9.1 DiscussionThis includes bot
29、h applied and integral hand grips as defined in Specification F2276.3.1.10 hand grips, movablemovable piece designed to be grasped by the hand(s) for support and use during exercise.3.1.10.1 DiscussionThis includes both applied and integral hand grips as defined in Specification F2276.3.1.11 iconogr
30、aphy, ngraphic or pictorial symbols used on consoles or other parts of the equipment to display information.3.1.12 impairment, nany deficit in psychological, physiological, or anatomical structure or function that has an adverse effecton a persons ability to carry out day to day activities, includin
31、g health and leisure activities.3.1.12.1 DiscussionAn impairment is not a disability if it does not interfere with task performance.3.1.13 inclusive, adjincluding people with and without disabilities or impairments, or both.3.1.14 incremental weights, nadditional fractional weights that can be appli
32、ed in between the main weight plate selections.3.1.15 instructions for use, nuser facing instructions that are affixed to the equipment relating to the use of a piece ofequipment, not including core branding or logo artwork, manufacturers labels, model number labels, or standards or certificationmar
33、ks, or owners/training manual(s).3.1.15.1 DiscussionFor example: Placard, decal panel, or other means.3.1.16 labels, ninformation directed at the user to support the use of a specific element of a piece of equipment, not includingcore branding or logo artwork, manufacturers labels, model number labe
34、ls or standards, or certification marks.3.1.17 luminance (L), nvalue or lightness on a scale ranging from black to white of light reflected off a surface measured incandela per meter squared (cd/m2).3.1.18 main controls, nquick start, start, stop, enter, clear, numeric digits 0 to 9, increase resist
35、ance/level, decreaseresistance/level, increase speed, decrease speed, increase gradient/incline, decrease gradient/incline, audio on/off, and any otherfunctions, for example, emergency or safety stops, considered essential for the use of the equipment.3.1.18.1 DiscussionSee Appendix X1 for suggested
36、 universal design symbols for main control functions.3.1.19 mobility aids, nany device used to assist in balance, transfer, or locomotion.3.1.20 movable seat, na seat which can be moved away from the primary exercise position where the entire seat structureremains attached to the main structure of t
37、he equipment.3.1.21 postural supports, nintegral element to the equipment which assists in holding the user in position during exercise.3.1.22 quick start, none push mechanism that starts the equipment in manual mode at the minimal speed or resistance thatis specified in the standard for the specifi
38、c piece of equipment.3.1.23 removable seat, na seat that can be moved away from the primary exercise position where the entire seat structure canbe removed or separated from the remaining structure of the equipment.3.1.24 sans serif, nwithout any short lines stemming from or at an angle to the upper
39、 and lower ends of the strokes of a letter.F3021 1733.1.24.1 DiscussionFor example: Times New Roman is a serif font where as Arial, Helvetica, and Calibri are sans serif fonts.3.1.25 seated cardio equipment, nrecumbent cardio fitness equipment performed from the seated position, such as recumbentell
40、ipticals, recumbent steppers, recumbent cycles, and total (upper and lower extremities) body and upper body ergometers.3.1.25.1 DiscussionAn upright cycle is not seated recumbent cardio equipment.3.1.26 skids, na mechanism for moving equipment by sliding across the floor without wheels.3.1.27 swivel
41、 seat, na seat that rotates horizontally about a vertical axis as if on a pivot.3.1.28 tactile, adjof, or relating to, or proceeding from, the sense of touch.3.1.29 transfer, vthe action of getting onto (access) or off of (egress) a piece of fitness equipment, particularly from awheelchair or other
42、mobility aid.3.1.30 transfer surface, narea of the static or moving surface, or both, that is clear of any obstruction that would impedenormal foot placements or motion, or both, and therefore is accessible for normal use.3.1.31 wheelchair, ndevice to provide wheeled mobility with seating support sy
43、stem for a person with mobility impairment,including manual wheelchairs which are powered by the user and electrically powered wheelchairs which are powered by a motor.3.1.31.1 DiscussionA walking aid with wheels is not a wheelchair.3.1.31.2 DiscussionA scooter is an electrically powered wheelchair.
44、4. Color Value Contrast4.1 Color Value Contrast Criteria Background:4.1.1 For the purpose of this standard, significant color value contrast is defined to be a value greater than or equal to 70 %.4.1.2 The following applies to these sections within the document:4.1.2.1 Integral surfaces and separate
45、 steps/frame (see 5.1.1.7).4.1.2.2 Element of the equipment where the user is required to step over/adjacent surface (see 5.1.1.21).4.1.2.3 Seats/primary adjacent surface (see 5.1.2.12).4.1.2.4 Adjustment mechanisms/adjacent surface (see 5.1.3.8).4.1.2.5 Markings/adjacent surface (see 5.1.3.12).4.1.
46、2.6 Intended gripping surfaces of all hand grips/adjacent surface (see 5.1.4.4).4.1.2.7 Test, iconography, and a minimum of the border of the main instruction panel/adjacent surface (see 5.1.6.7).4.1.2.8 Inclusive fitness symbol/adjacent surface (see 5.1.6.8).4.1.2.9 Text, iconography, and a minimum
47、 of the border of the main control buttons/adjacent surface (see 5.2.4.3).4.1.2.10 Numeric readouts relating to the main controls/adjacent surface (see 5.2.6.2).4.1.2.11 Audio headphone jack (socket) symbol/adjacent surface (see 5.2.7.8).4.1.2.12 Information button symbol/adjacent surface (see 5.2.7
48、14).4.1.3 The US Access Boards Americans with Disabilities Act Accessibility Guidelines (ADAAG) for signage specifies thatsignage is “more legible for persons with low vision when characters contrast with their background by at least 70 percent”(A1.4.1). The calculation of contrast is determined by
49、Color Value Contrast5L1 2 L2!L1#3100 (1)whereL1 = luminance (L) of the lighter areaL2 = luminance (L) of the darker areaNOTE 2It is a best practice to choose color pairs that have a color value contrast of greater than 80 % due to the approximately 10-point reproducibilitylimit for color pairings close to 70 % color value contrast found in the ASTM interlaboratory study. See Test Method F3022 for more information on thetest method and interlaboratory study results.4.2 Color Definitions:4.2.1 There are three basic prop
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1