ATIS 0300220-2011 Representation of the Communications Industry Manufacturers Suppliers and Related Service Companies for Information Exchange.pdf

1、 ATIS-0300220.2011 REPRESENTATION OF THE COMMUNICATIONS INDUSTRY MANUFACTURERS, SUPPLIERS, AND RELATED SERVICE COMPANIES FOR INFORMATION EXCHANGE ATIS is the leading technical planning and standards development organization committed to the rapid development of global, market-driven standards for th

2、e information, entertainment and communications industry. More than 200 companies actively formulate standards in ATIS Committees, covering issues including: IPTV, Cloud Services, Energy Efficiency, IP-Based and Wireless Technologies, Quality of Service, Billing and Operational Support, Emergency Se

3、rvices, Architectural Platforms and Emerging Networks. In addition, numerous Incubators, Focus and Exploratory Groups address evolving industry priorities including Smart Grid, Machine-to-Machine, Connected Vehicle, IP Downloadable Security, Policy Management and Network Optimization. ATIS is the No

4、rth American Organizational Partner for the 3rd Generation Partnership Project (3GPP), a member and major U.S. contributor to the International Telecommunication Union (ITU) Radio and Telecommunications Sectors, and a member of the Inter-American Telecommunication Commission (CITEL). ATIS is accredi

5、ted by the American National Standards Institute (ANSI). For more information, please visit . AMERICAN NATIONAL STANDARD Approval of an American National Standard requires review by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards

6、developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that

7、all views and objections be considered, and that a concerted effort be made towards their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing,

8、purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority t

9、o issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. CAUTION NOTICE: This American National Standard m

10、ay be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writi

11、ng the American National Standards Institute. Notice of Disclaimer b) Provide an industry procedure for obtaining directories as paper and soft (e.g., electronic, diskette, CD-ROM) copies; c) Provide services and materials under reasonable and non-discriminatory terms; and d) Notify the developer of

12、 this standard at least two years prior to any anticipated exhaustion of the code sets. _ 1 Telcordia Technologies (“Telcordia”) or its equivalent is such a maintenance agent. At the time of approval of this standard, ATIS and the responsible ATIS Forum/Committee that developed the standard were awa

13、re of only one maintenance agent, Telcordia, for this requirement. If you are aware of an equivalent or an alternative maintenance agent, please provide this information to the ATIS General Counsel. Your comments will receive careful consideration at a meeting of the responsible Forum/Committee, whi

14、ch you may attend for the purpose of this consideration. ATIS-0322000.2011 3 Annex A (informative) A ASSIGNMENT OF MAINTENANCE AGENT The maintenance agent for this standard is: Telcordia Technologies, Inc. Common Language Standards Room RRC-6C137 One Telcordia Drive Piscataway, NJ 08854-4157 +1 (732

15、) 699-4520 Email: ATIS-0322000.2011 4 Annex B (informative) B RECOGNITION OF OTHER COMPANY IDENTITY ISSUING AGENCIES This annex is included to provide additional information only and is not essential for the completion of the requirements as defined in this standard. ISO/IEC 15459, Information techn

16、ology Automatic identification and data capture techniques Unique identification, refers to the unique identification of identity issuers, items, units, packages, etc., throughout the supply chain (i.e., to enable individual data capturing from transport units, returnable transport items, products,

17、packages, as well as groupings). To ensure a globally unique Manufacturer Identification segment, the ISO/IEC 15459 standard includes an Issuing Agency Code (IAC) per ISO/IEC 15459-2, and the Issuing Agency assigned Company Identifying Number (CIN) for manufacturers/suppliers/companies per this stan

18、dard. This is the standard approach as specified in ISO/IEC 15459, parts 1, 4, 5, 6; and ANS MH10.8.7 standards. For more detailed information on possible use cases see ATIS-0300091, Serialization Standard for Telecommunication Network Infrastructure Equipment. ISO/IEC Standards are available from a

19、vailable from ANSI, 25 West 43rd Street (between 5th and 6th Avenues), 4th floor, New York, NY 10036, Telephone: (212) 642-4900, Telefax: (212) 398-0023, Web site: . NOTE: Websites are constantly involving entities; please note the links above may change. If a link is no longer valid, it may be useful to proceed to the root website of the link in order to start a search (e.g., ).