ATIS 0600307-2018 Fire Resistance Criteria C Ignitability Requirements for Equipment Assemblies Ancillary Non-Metallic Apparatus and Fire Spread Requirements for Wire and Cable.pdf

1、ATIS-0600307.2018 (Revision of ATIS-0600307.2014) American National Standard for Telecommunications Fire Resistance Criteria Ignitability Requirements for Equipment Assemblies, Ancillary Non-Metallic Apparatus, and Fire Spread Requirements for Wire and Cable Alliance for Telecommunications Industry

2、Solutions Approved May 2018 American National Standards Institute, Inc. Abstract This standard covers the fire resistance characteristics of equipment assemblies and selected products and materials used within telecommunications network equipment facilities and spaces of similar function. This stand

3、ard along with the latest published version of ATIS-0600319 shall be used as the means of appraising fire risk within a telecommunications network equipment facility or space with similar function. ATIS-0600307.2018 ii Foreword The information contained in this Foreword is not part of this American

4、National Standard (ANS) and has not been processed in accordance with ANSIs requirements for an ANS. As such, this Foreword may contain material that has not been subjected to public review or a consensus process. In addition, it does not contain requirements necessary for conformance to the Standar

5、d. The Alliance for Telecommunication Industry Solutions (ATIS) serves the public through improved understanding between providers, customers, and manufacturers. The Sustainability in Telecom: Energy and Protection (STEP) Committee formerly the Network Interface, Power, and Protection Committee (NIP

6、P) engages industry expertise to develop standards and technical reports for telecommunications equipment and environments in the areas of energy efficiency, environmental impacts, power, and protection. The work products of STEP enable vendors, operators, and their customers to deploy and operate r

7、eliable, environmentally sustainable, energy-efficient communications technologies. STEP is committed to proactive engagement with national, regional, and international standards development organizations and forums that share its scope of work. ANSI guidelines specify two categories of requirements

8、: mandatory and recommendation. The mandatory requirements are designated by the word shall and recommendations by the word should. Where both a mandatory requirement and a recommendation are specified for the same criterion, the recommendation represents a goal currently identifiable as having dist

9、inct compatibility or performance advantages. Suggestions for improvement of this document are welcome. They should be sent to the Alliance for Telecommunications Industry Solutions, STEP, 1200 G Street NW, Suite 500, Washington, DC 20005. At the time it approved this document, STEP, which is respon

10、sible for the development of this Standard, had the following leadership: E. Gallo, STEP Chair (Ericsson) J. Fuller, STEP Vice Chair (AT federal, state, or local codes; or other user specified standards or documents. Values of units of measure as indicated in this standard are shown in both SI and B

11、ritish Engineering units. Where a unit of measure is followed by a value enclosed in parentheses, the second value may be an approximation of the first value. In this standard, the first-stated value is the requirement. ATIS-0600307.2018 2 2 Normative References The following standards contain provi

12、sions that, through reference in this text, constitute provisions of this American National Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this American National Standard should investigate the most r

13、ecent editions of the standards cited below. Check with ATIS for information on applicability of any revision of the cited references as they apply to this standard. ATIS-0600319, Equipment Assemblies - Fire Propagation Risk Assessment Criteria.1UL1694, Tests for Flammability of Small Polymeric Comp

14、onent Materials.2UL 746C, Polymeric materials Use in Electrical Equipment Evaluations.2ASTM D2863-17a, Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index).3 NFPA 70 (2017 Edition), National Electrical Code.4ASTM E 84-17a, T

15、est for Surface Burning Characteristics of Building Materials.3UL 94, Tests for Flammability of Plastic Materials for Parts in Devices and Appliances.2NFPA 262 (2015 Edition), Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces.4UL 510, Standard for Polyvinyl Chloride,

16、 Polyethylene, and Rubber Insulating tape.2IEC 60695-11-5, Fire hazard testing Part 11-5: Test methods, needle-flame test method- Apparatus, confirmatory test arrangement and guidance.5UL 723, Test for Surface Burning Characteristics of Building Materials.2UL 900, Air Filter Units.2IEEE 1202, IEEE S

17、tandard for Flame-Propagation Testing of Wire and Cable.6UL 1441, Coated Electrical Sleeving.2UL 1581, Reference Standard for Electrical Wires, Cables, and Flexible Cords. 2UL 1666, Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts.2UL 1685, Vert

18、ical-Tray Fire-Propagation and Smoke-Release Test for Electrical and Optical-Fiber Cables.2UL 1694, Tests for Flammability of Small Polymeric Component Materials.2CAN/CSA-C22.2 No. 0.3-09 (R2014), Test methods for electrical wires and cables. 7UL 2024, Signaling, Optical Fiber and Communications Rac

19、eways and Cable Routing Assemblies.2ASTM E814-13a, Standard Test Method for Fire Tests of Penetration Fire Stop Systems.3UL 1479, Fire Tests of Through-Penetration Fire Stops.2 GR-63-CORE Issue 5, NEBS Requirements Physical Protection.8UL 900, Standard for Air Filter Units.2ASTM D2863-17, Standard T

20、est Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index).31This document is available from the Alliance for Telecommunications Industry Solutions at . 2This document is available from UL. 3This document is available from ASTM Internationa

21、l. . 4This document is available from the National Fire Protection Association (NFPA). . The National Electrical Code and NEC are registered trademarks of the National Fire Protection Association, Quincy, MA. 5This document is available from the International Electrotechnical Commission. 6This docum

22、ent is available from the Institute of Electrical and Electronics Engineers (IEEE). 7This document is available from CSA Group . 8This document is available from Telcordia at . ATIS-0600307.2018 3 3 Definitions, Abbreviations, however, they shall meet one of the other appropriate options contained i

23、n 4.1.1. See 4.1.1 regarding requirements for items such as plugs, sockets, jacks, terminal blocks, etc., which may form part of an enclosure. 4.1.4 Interconnect Wire, Interconnect Optical Fiber, and Interconnect Optical Cables Interconnect wire refers to individual wires and cables, including optic

24、al fiber and cables, that are totally contained within the equipment assembly Individual interconnect wire and cable (copper or other alloy) used within equipment assemblies shall satisfy the requirements of VW-1 as specified in UL 1581. Interconnecting optical fibers and optical cables shall satisf

25、y one or more of the applicable items in 4.1.1 Any wire and cable exterior to an equipment assembly shall meet the requirements of 4.2. 4.2 Fire Spread Requirements for Wire ATIS-0600307.2018 6 CAN/CSA-C22.2 No. 0.3; or IEEE 1202. Examples of cable types meeting these requirements are: CM, CL2, CL3, OFN, OFC, MP, FPL, and CATV, in addition to those specified in 4.2.1 and 4.2.2. 4.2.4 AC-Powered Wiring the second value is based on three applications of the ignition source.