ATIS 1000608A-1992 Integrated Services Digital Network (ISDN) - Signaling Specification for X 25 Packet-Switched Bearer Service for Digital Subscriber Signaling System Number 1 (DSe.pdf

1、 AMERICAN NATIONAL STANDARD FOR TELECOMMUNICATIONS ATIS-1000608.a.1992(R2012) Integrated Services Digital Network (ISDN) Signaling Specification for X.25 Packet-Switched Bearer Services for Digital Subscriber Signaling System Number 1 (DSS1): Terminal Initialization Procedures for Packet-Mode Data A

2、TIS is the leading technical planning and standards development organization committed to the rapid development of global, market-driven standards for the information, entertainment and communications industry. More than 200 companies actively formulate standards in ATIS Committees and Forums, cover

3、ing issues including: IPTV, Cloud Services, Energy Efficiency, IP-Based and Wireless Technologies, Quality of Service, Billing and Operational Support, Emergency Services, Architectural Platforms and Emerging Networks. In addition, numerous Incubators, Focus and Exploratory Groups address evolving i

4、ndustry priorities including Smart Grid, Machine-to-Machine, Connected Vehicle, IP Downloadable Security, Policy Management and Network Optimization. ATIS is the North American Organizational Partner for the 3rd Generation Partnership Project (3GPP), a member and major U.S. contributor to the Intern

5、ational Telecommunication Union (ITU) Radio and Telecommunications Sectors, and a member of the Inter-American Telecommunication Commission (CITEL). ATIS is accredited by the American National Standards Institute (ANSI). For more information, please visit .AMERICAN NATIONAL STANDARD Approval of an A

6、merican National Standard requires review by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached b

7、y directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made towards their resolution. The use of American National Standa

8、rds is completely voluntary; their existence does not in any respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does n

9、ot develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpr

10、etations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodic

11、ally to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Notice of Disclaimer - to indicate a specific terminal for the purpose of terminal selectio

12、n. (See annex A of ANSI T1.608a-1992 for the associated procedures.) See clause 3 of ANSI T1.610 (specifically, Section 8.2.1 of CCITT Recommendation Q.932) for the coding of the Endpoint identifier information element. ANSI Tl.608a-1992 Page 6 of 7 pages Insert the following normative annexes as an

13、nexes A and B of this standard. Redesignate the current annexes A and B (both of which are informative) as annexes C and D, respectively. Annex A (normative) User service profiles and terminal identification This annex is identical to annex A of CCITT Recommendation Q.932, as referenced and modified

14、 by clause 3 of ANSI T1.610. Annex B (normative) Information request procedures This annex is identical to annex E3 of CCITT Recommendation Q.932, as referenced and modified by clause 3 of ANSI T1.610, with the following qualifications: a) The material on the Overlap Sending and Call Delivered call

15、states shall be applicable to case A access only; b) The statement that “This capability is intended for use with the Keypad and Feature Key Management protocols” shall be applicable to case A access only; c) The statement that “The network will restart timer T302.if the requested information is not

16、 complete” shall be applicable to case A access only; d) The material on the Keypad facility and Called party number information elements shall be applicable to case A access only; e) The material on “Normal procedures” for the call-associated case (e.g., use of a CALL PROCEEDING message, initiation

17、 of call clearing) shall be applicable to case A access only. The material on “Normal procedures” for the non-call-associated case shall be applicable to both case A access and case B access; f) The condition that I. if the information received is incomplete upon expiry of timer T302” shall be appli

18、cable to case A access only; g) The material on “Abnormal procedures” for the call-associated case (e.g., initiation of call clearing) shall be applicable to case A access only. The material on “Abnormal procedures” for the non-call-associated case shall be applicable to both case A access and case

19、B access. All other material in annex B, which is not covered by qualifications (a) - (g), shall be applicable to both case A access and case B access. In addition, all references to “CCITT Q.931” within annex B of CCITT Recommendation Q.932, i.e., references to “ANSI T1.607” based on the modificati

20、ons in Section 3 of ANSI T1.610, should be extended to read “ANSI T1.607 and ANSI T1.608”. ANSlT1.608a-1992 Page 7 of 7 pages The following changes pertain to figures that appear in annex A of the main document, ANSI T1.608-1991. In future revisions, when the information in ANSI T1.608-1991 and ANSI

21、 T1.608a- 7992 are merged, this annex will be redesignated as annex C and the prefix letters of these figures will change from A to C. In figure A. I, replace Note 8 with the following: 8 Not shown in the diagram is the X.25 restart procedure performed after link setup. In figure A.3, replace Note 6

22、 with the following: 6 Not shown in the diagram is the X.25 restart procedure performed after link setup. In figure A.5, replace the “Note 2” tag under the line representing the UA frame with a tag that reads “Notes 2,3”. Add the following note to the list of notes at the bottom of the figure: 3 Not

23、 shown in the diagram is the X.25 restart procedure performed after link setup. In figures A.6 and A. 7, replace the “Note 2” tag under the line representing the UA frame with a tag that reads “Notes 2,3”. Add the following note to the lists of notes at the bottom of each figure: 3 The X.25 Restart procedure should follow the link setup, if that link was not already established. ANSI T1.608a-1992